Browse by Fellow

Saroja, S. ; Dasgupta, A. ; Divakar, R. ; Raju, S. ; Mohandas, E. ; Vijayalakshmi, M. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2011) Development and characterization of advanced 9Cr ferritic/martensitic steels for fission and fusion reactors Journal of Nuclear Materials, 409 (2). pp. 131-139. ISSN 0022-3115

Nagesha, A. ; Kannan, R. ; Parameswaran, P. ; Sandhya, R. ; Bhanu Sankara Rao, K. ; Singh, Vakil (2010) A comparative study of isothermal and thermomechanical fatigue on type 316L(N) austenitic stainless steel Materials Science and Engineering: A, 527 (21-22). pp. 5969-5975. ISSN 0921-5093

Latha, S. ; Mathew, M. D. ; Parameswaran, P. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2010) Creep behaviour of 14Cr-15Ni-Ti stainless steel at 923 K Materials Science and Engineering: A, 527 (20). pp. 5167-5174. ISSN 0921-5093

Reddy, G. V. Prasad ; Harini, P. ; Sandhya, R. ; Bhanu Sankara Rao, K. ; Paretkar, R. K. (2010) On dual-slope linear cyclic hardening of Hastelloy X Materials Science and Engineering: A, 527 (16-17). pp. 3848-3851. ISSN 0921-5093

Kumar, J. Ganesh ; Chowdary, M. ; Ganesan, V. ; Paretkar, R. K. ; Bhanu Sankara Rao, K. ; Mathew, M. D. (2010) High temperature design curves for high nitrogen grades of 316LN stainless steel Nuclear Engineering and Design, 240 (6). pp. 1363-1370. ISSN 0029-5493

Mathew, M. D. ; Palanichamy, P. ; Latha, S. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Baldev Raj, (2010) Microstructural changes in alloy 625 due to creep and characterization using NDE techniques Transactions of the Indian Institute of Metals, 63 (2-3). pp. 449-452. ISSN 0972-2815

Goyal, Sunil ; Karthik, V. ; Kasiviswanathan, K. V. ; Valsan, M. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2010) Finite element analysis of shear punch testing and experimental validation Materials & Design, 31 (5). pp. 2546-2552. ISSN 0261-3069

Reddy, G. V. Prasad ; Sandhya, R. ; Bhanu Sankara Rao, K. ; Sankaran, S. (2010) Influence of nitrogen alloying on dynamic strain ageing regimes in low cycle fatigue of AISI 316LN stainless steel Procedia Engineering, 2 (1). pp. 2181-2188. ISSN 1877-7058

Baldev Raj, ; Bhanu Sankara Rao, K. (2009) Building on knowledge base of sodium cooled fast spectrum reactors to develop materials technology for fusion reactors Journal of Nuclear Materials, 386-388 . pp. 935-943. ISSN 0022-3115

Nagesha, A. ; Valsan, M. ; Kannan, R. ; Bhanu Sankara Rao, K. ; Bauer, V. ; Christ, H. -J. ; Singh, Vakil (2009) Thermomechanical fatigue evaluation and life prediction of 316L(N) stainless steel International Journal of Fatigue, 31 (4). pp. 636-643. ISSN 0142-1123

Goyal, Sunil ; Sandhya, R. ; Valsan, M. ; Bhanu Sankara Rao, K. (2009) The effect of thermal ageing on low cycle fatigue behaviour of 316 stainless steel welds International Journal of Fatigue, 31 (3). pp. 447-454. ISSN 0142-1123

Kannan, R. ; Sandhya, R. ; Ganesan, V. ; Valsan, M. ; Bhanu Sankara Rao, K. (2009) Effect of sodium environment on the low cycle fatigue properties of modified 9Cr-1Mo ferritic martensitic steel Journal of Nuclear Materials, 384 (3). pp. 286-291. ISSN 0022-3115

Laha, K. ; Chandravathi, K. S. ; Parameswaran, P. ; Bhanu Sankara Rao, K. (2009) Type IV cracking susceptibility in weld joints of different grades of Cr-Mo ferritic steel Metallurgical and Materials Transactions A, 40 (2). pp. 386-397. ISSN 1073-5623

Baldev Raj, ; Bhanu Sankara Rao, K. (2009) Design, development and characterization of fast breeder reactor materials and components Metals Materials and Processes, 21 (1). pp. 53-71. ISSN 0970-423X

Baldev Raj, ; Saroja, S. ; Laha, K. ; Karthikeyan, T. ; Vijayalakshmi, M. ; Bhanu Sankara Rao, K. (2009) Methods to overcome embrittlement problem in 9Cr-1Mo ferritic steel and its weldment Journal of Materials Science, 44 (9). pp. 2239-2246. ISSN 0022-2461

Latha, S. ; Mathew, M. D. ; Parameswaran, P. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2008) Thermal creep properties of alloy D9 stainless steel and 316 stainless steel fuel clad tubes International Journal of Pressure Vessels and Piping, 85 (12). pp. 866-870. ISSN 0308-0161

Samuel, E. Isaac ; Choudhary, B. K. ; Bhanu Sankara Rao, K. (2008) Inter-relation between true stress at the onset of necking and true uniform strain in steels- a manifestation of onset to plastic instability Materials Science and Engineering: A, 480 (1-2). pp. 506-509. ISSN 0921-5093

Mathew, M. D. ; Parameswaran, P. ; Bhanu Sankara Rao, K. (2008) Microstructural changes in alloy 625 during high temperature creep Materials Characterization, 59 (5). pp. 508-513. ISSN 1044-5803

Reddy, G. V. Prasad ; Sandhya, R. ; Valsan, M. ; Bhanu Sankara Rao, K. (2008) High temperature low cycle fatigue properties of 316(N) weld metal and 316L(N)/316(N) weld joints International Journal of Fatigue, 30 (3). pp. 538-546. ISSN 0142-1123

Shastry, C. Girish ; Parameswaran, P. ; Mathew, M. D. ; Bhanu Sankara Rao, K. ; Pathak, S. D. (2008) Effect of loading history on the threshold stress in the creep deformation of an austenitic stainless steel Materials Science and Engineering: A, 473 (1-2). pp. 133-138. ISSN 0921-5093

Shastry, C. Girish ; Parameswaran, P. ; Mathew, M. D. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2007) The effect of strain rate and temperature on the elevated temperature tensile flow behavior of service-exposed 2.25Cr-1Mo steel Materials Science and Engineering: A, 465 (1-2). pp. 109-115. ISSN 0921-5093

Mathew, M. D. ; Latha, S. ; Bhanu Sankara Rao, K. (2007) An assessment of creep strength reduction factors for 316L(N) SS welds Materials Science and Engineering: A, 456 (1-2). pp. 28-34. ISSN 0921-5093

Nagendran, R. ; Janawadkar, M. P. ; Pattabiraman, M. ; Baisnab, D. K. ; Baskaran, R. ; Vaidhyanathan, L. S. ; Hariharan, Y. ; Baldev Raj, ; Nagesha, A. ; Valsan, M. ; Bhanu Sankara Rao, K. (2007) Development of SQUID-based non-destructive evaluation system for detecting fatigue induced transformation of δ-ferrite to non-magnetic phases NDT & E International, 40 (3). pp. 215-219. ISSN 0963-8695

Laha, K. ; Chandravathi, K. S. ; Parameswaran, P. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2007) Characterization of microstructures across the heat-affected zone of the modified 9Cr-1Mo weld joint to understand its role in promoting type IV cracking Metallurgical and Materials Transactions A, 38 (1). pp. 58-68. ISSN 1073-5623

Nagendran, R. ; Janawadkar, M. P. ; Pattabiraman, M. ; Baisnab, D. K. ; Jayapandian, J. ; Baskaran, R. ; Vaidyanathan, L. S. ; Hariharan, Y. ; Nagesha, A. ; Valsan, M. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2007) Development of SQUID based system for non-destructive evaluation IEEE Transactions on Applied Superconductivity, 17 (3). pp. 3824-3829. ISSN 1051-8223

Shankar, Vani ; Valsan, M. ; Bhanu Sankara Rao, Kota ; Kannan, R. ; Mannan, S. L. ; Pathak, S. D. (2006) Low cycle fatigue behavior and microstructural evolution of modified 9Cr-1Mo ferritic steel Materials Science and Engineering: A, 437 (2). pp. 413-422. ISSN 0921-5093

Sandhya, R. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2005) Creep-fatigue interaction behaviour of a 15Cr-15Ni, Ti modified austenitic stainless steel as a function of Ti/C ratio and microstructure Materials Science and Engineering: A, 392 (1-2). pp. 326-334. ISSN 0921-5093

Phaniraj, C. ; Choudhary, B. K. ; Baldev Raj, ; Bhanu Sankara Rao, K. (2005) A critical damage criterion for creeping solids Journal of Materials Science, 40 (9-10). pp. 2561-2564. ISSN 0022-2461

Srinivasan, V. S. ; Sandhya, R. ; Valsan, M. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2004) Comparative evaluation of strain controlled low cycle fatigue behaviour of solution annealed and prior cold worked 316L(N) stainless steel International Journal of Fatigue, 26 (12). pp. 1295-1302. ISSN 0142-1123

Samuel, K. G. ; Ganesan, V. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Kushwaha, H. S. (2004) Strain controlled LCF behaviour of SA-333 Gr 6 piping material in the range 298-673 K International Journal of Pressure Vessels and Piping, 81 (12). pp. 973-981. ISSN 0308-0161

Rai, Sanjay K. ; Kumar, Anish ; Shankar, Vani ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2004) Characterization of microstructures in Inconel 625 using X-ray diffraction peak broadening and lattice parameter measurements Scripta Materialia, 51 (1). pp. 59-63. ISSN 1359-6462

Mathew, M. D. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2004) Creep properties of service-exposed alloy 625 after re-solution annealing treatment Materials Science and Engineering: A, 372 (1-2). pp. 327-333. ISSN 0921-5093

Shastry, C. Girish ; Mathew, M. D. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2004) Analysis of elevated temperature flow and work hardening behaviour of service-exposed 2.25Cr-1Mo steel using Voce equation International Journal of Pressure Vessels and Piping, 81 (3). pp. 297-301. ISSN 0308-0161

Shankar, Vani ; Valsan, M. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2004) Effects of temperature and strain rate on tensile properties and activation energy for dynamic strain aging in alloy 625 Metallurgical and Materials Transactions A, 35 (10). pp. 3129-3139. ISSN 1073-5623

Srinivasan, V. S. ; Valsan, M. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Baldev Raj, (2003) Low cycle fatigue and creep-fatigue interaction behavior of 316L(N) stainless steel and life prediction by artificial neural network approach International Journal of Fatigue, 25 (12). pp. 1327-1338. ISSN 0142-1123

Baldev Raj, ; Moorthy, V. ; Jayakumar, T. ; Bhanu Sankara Rao, K. (2003) Assessment of microstructures and mechanical behaviour of metallic materials through non-destructive characterisation International Materials Reviews, 48 (5). pp. 273-325. ISSN 0950-6608

Bhanu Sankara Rao, K. (2003) High temperature fatigue behaviour of intermetallics Sadhana (Academy Proceedings in Engineering Sciences), 28 (3-4). pp. 695-708. ISSN 0256-2499

Kumar, Anish ; Choudhary, B. K. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2003) Characterisation of long term aging behaviour of 9Cr-1Mo ferritic steel using ultrasonic velocity Materials Science and Technology, 19 (5). pp. 637-641. ISSN 0267-0836

Phaniraj, C. ; Choudhary, B. K. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2003) Relationship between time to reach Monkman-Grant ductility and rupture life Scripta Materialia, 48 (9). pp. 1313-1318. ISSN 1359-6462

Bhanu Sankara Rao, K. ; Baldev Raj, (2003) Advances in the development of creep and fatigue resistance materials - an overview Journal of the Institution of Engineers (India), 84 (1). pp. 1-192003. ISSN 0257-4411

Sreenivasan, P. R. ; Shastry, C. G. ; Mathew, M. D. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Bandyopadhyay, G. (2003) Dynamic fracture toughness and charpy transition properties of a service-exposed 2.25Cr-1Mo reheater header pipe Journal of Engineering Materials and Technology, 125 (2). pp. 227-233. ISSN 0094-4289

Nagesha, A. ; Valsan, M. ; Kannan, R. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2002) Influence of temperature on the low cycle fatigue behaviour of a modified 9Cr-1Mo ferritic steel International Journal of Fatigue, 24 (12). pp. 1285-1293. ISSN 0142-1123

Kumar, Anish ; Shankar, Vani ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2002) Correlation of microstructure and mechanical properties with ultrasonic velocity in the Ni-based superalloy Inconel 625 Philosophical Magazine Part A, 82 (13). pp. 2529-2545. ISSN 0141-8610

Samuel, E. Isaac ; Choudhary, B. K. ; Bhanu Sankara Rao, K. (2002) Influence of temperature and strain rate on tensile work hardening behaviour of type 316 LN austenitic stainless steel Scripta Materialia, 46 (7). pp. 507-512. ISSN 1359-6462

Kumar, Anish ; Laha, K. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2002) Comprehensive microstructural characterization in modified 9Cr-1Mo ferritic steel by ultrasonic measurements Metallurgical and Materials Transactions A, 33 (6). pp. 1617-1626. ISSN 1073-5623

Palanichamy, P. ; Mathew, M. D. ; Latha, S. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Baldev Raj, (2001) Assessing microstructural changes in alloy 625 using ultrasonic waves and correlation with tensile properties Scripta Materialia, 45 (9). pp. 1025-1030. ISSN 1359-6462

Sandhya, R. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Devanathan, R. (2001) Substructural recovery in a cold worked Ti-modified austenitic stainless steel during high temperature low cycle fatigue International Journal of Fatigue, 23 (9). pp. 789-797. ISSN 0142-1123

Choudhary, B. K. ; Phaniraj, C. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2001) Creep deformation behaviour and kinetic aspects of 9Cr-1Mo ferritic steel ISIJ International, 41 . S73-S80. ISSN 0915-1559

Shankar, Vani ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2001) Microstructure and mechanical properties of Inconel 625 superalloy Journal of Nuclear Materials, 288 (2-3). pp. 222-232. ISSN 0022-3115

Kumar, Anish ; Laha, K. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2001) Imaging of modified 9Cr-1Mo ferritic steel weldment via ultrasonic velocity measurements Science and Technology of Welding & Joining, 6 (6). pp. 383-386. ISSN 1362-1718

Laha, K. ; Chandravathi, K. S. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Sastry, D. H. (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo similar and dissimilar weld joints Metallurgical and Materials Transactions A, 32 (1). pp. 115-124. ISSN 1073-5623

Sasikala, G. ; Mannan, S. L. ; Mathew, M. D. ; Bhanu Sankara Rao, K. (2000) Creep deformation and fracture behavior of types 316 and 316L(N) stainless steels and their weld metals Metallurgical and Materials Transactions A, 31 (4). pp. 1175-1185. ISSN 1073-5623

Choudhary, B. K. ; Rai, Sanjai K. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2000) Assessment of LCF damage in 9Cr-1Mo ferritic steel at 300 K using XRD technique Transactions of the Indian Institute of Metals, 53 (3). pp. 353-359. ISSN 0972-2815

Kumar, Anish ; Choudhary, B. K. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (2000) Influence of thermal ageing and creep on ultrasonic velocity in 9Cr-1Mo ferritic steel Transactions of the Indian Institute of Metals, 53 (3). pp. 341-345. ISSN 0019-493X

Mathew, M. D. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Paknikar, K. ; Singh, Ranbir (2000) Recovery of creep properties of alloy 625 after long term service Key Engineering Materials, 171-174 . pp. 537-544. ISSN 1013-9826

Choudhary, B. K. ; Phaniraj, C. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (2000) Transient creep behaviour of forged thick section 9Cr-1Mo ferritic steel Key Engineering Materials, 171-174 . pp. 437-444. ISSN 1013-9826

Sandhya, R. ; Rao, K. B. S. ; Mannan, S. L. ; Devanathan, R. (1999) The effect of temperature on the low cycle fatigue properties of a 15Cr-15Ni, Ti modified austenitic stainless steel Scripta Materialia, 41 (9). pp. 921-927. ISSN 1359-6462

Srinivasan, V. S. ; Nagesha, A. ; Valsan, M. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Sastry, D. H. (1999) Effect of hold-time on low cycle fatigue behaviour of nitrogen bearing 316L stainless steel International Journal of Pressure Vessels and Piping, 76 (12). pp. 863-870. ISSN 0308-0161

Sasikala, G. ; Mathew, M. D. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (1999) Creep deformation and fracture behaviour of a nitrogen-bearing type 316 stainless steel weld metal Journal of Nuclear Materials, 273 (3). pp. 257-264. ISSN 0022-3115

Choudhary, B. K. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Kashyap, B. P. (1999) Influence of prior thermal ageing on tensile deformation and fracture behaviour of forged thick section 9Cr-1Mo ferritic steel Journal of Nuclear Materials, 273 (3). pp. 315-325. ISSN 0022-3115

Rai, Sanjay ; Choudhary, B. K. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (1999) Characterization of low cycle fatigue damage in 9Cr-1Mo ferritic steel using X-ray diffraction technique International Journal of Pressure Vessels and Piping, 76 (5). pp. 275-281. ISSN 0308-0161

Bhanu Sankara Rao, K. ; Moorthy, V. ; Choudhary, B. K. ; Vaidyanathan, S. ; Jayakumar, T. ; Raj, Baldev (1999) An assessment of low cycle fatigue damage using magnetic Barkhausen emission in 9Cr-1Mo ferritic steel International Journal of Fatigue, 21 (3). pp. 263-269. ISSN 0142-1123

Bhanu Sankara Rao, K. ; Srinivasan, V. S. ; Valsan, M. ; Sandhya, R. ; Mannan, S. L. ; Sastry, D. H. (1999) High temperature time-dependent low cycle fatigue behaviour of a type 316L(N) stainless steel International Journal of Fatigue, 21 (1). pp. 11-21. ISSN 0142-1123

Choudhary, B. K. ; Saroja, S. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (1999) Creep-rupture behavior of forged, thick section 9Cr-1Mo ferritic steel Metallurgical and Materials Transactions A, 30 (11). pp. 2825-2834. ISSN 1073-5623

Lerch, B. A. ; Noebe, R. D. ; Rao, K. B. S. (1998) The effect of Zr on the low-cycle fatigue behavior of NiAl at 1000 K Journal of Materials Engineering and Performance, 7 (2). pp. 205-213. ISSN 1059-9495

Srinivasan, V. S. ; Sandhya, R. ; Valsan, M. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Sastry, D. H. (1997) The influence of dynamic strain ageing on stress response and strain-life relationship in low cycle fatigue of 316L(N) stainless steel Scripta Materialia, 37 (10). pp. 1593-1598. ISSN 1359-6462

Moorthy, V. ; Vaidyanathan, S. ; Laha, K. ; Jayakumar, T. ; Bhanu Sankara Rao, K. ; Baldev Raj, (1997) Evaluation of microstructures in 2.25Cr-1Mo and 9Cr-1Mo steel weldments using magnetic Barkhausen noise Materials Science and Engineering: A, 231 (1-2). pp. 98-104. ISSN 0921-5093

Bhanu Sankara Rao, K. ; Castelli, M. G. ; Allen, G. P. ; Ellis, John R. (1997) A critical assessment of the mechanistic aspects in HAYNES 188 during low-cycle fatigue in the range 25°C to 1000°C Metallurgical and Materials Transactions A, 28 (2). pp. 347-361. ISSN 1073-5623

Latha, S. ; Laha, K. ; Rao, K. B. S. ; Mannan, S. L. (1996) Comparative study of tensile flow parameters in forged and rolled 9Cr-1Mo steel International Journal of Pressure Vessels and Piping, 67 (2). pp. 155-160. ISSN 0308-0161

Bhanu Sankara Rao, K. ; Schiffers, H. ; Schuster, H. ; Halford, G. R. (1996) Temperature and strain-rate effects on low-cycle fatigue behavior of alloy 800H Metallurgical and Materials Transactions A, 27 (2). pp. 255-267. ISSN 1073-5623

Bhanu Sankara Rao, K. ; Schuster, H. ; Halford, G. R. (1996) Mechanisms of high-temperature fatigue failure in alloy 800H Metallurgical and Materials Transactions A, 27 (4). pp. 851-861. ISSN 1073-5623

Bhanu Sankara Rao, K. ; Kalluri, Sreeramesh ; Halford, Gary R. ; McGaw, Michael A. (1995) Serrated flow and deformation substructure at room temperature in Inconel 718 superalloy during strain controlled fatigue Scripta Metallurgica et Materialia, 32 (4). pp. 493-498. ISSN 0956-716X

Laha, K. ; Chandravathi, K. S. ; Rao, K. B. S. ; Mannan, S. L. (1995) Hot tensile properties of simulated heat-affected zone microstructures of 9Cr-1Mo weldment International Journal of Pressure Vessels and Piping, 62 (3). pp. 303-311. ISSN 0308-0161

Valsan, M. ; Sundararaman, D. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (1995) A comparative evaluation of low-cycle fatigue behavior of type 316LN base metal, 316 weld metal, and 316LN/316 weld joint Metallurgical and Materials Transactions A, 26 (5). pp. 1207-1219. ISSN 1073-5623

Valsan, M. ; Sastry, D. H. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (1994) Effect of strain rate on the high-temperature low-cycle fatigue properties of a nimonic PE-16 superalloy Metallurgical and Materials Transactions A, 25 (1). pp. 159-171. ISSN 1073-5623

Bhanu Sankara Rao, K. ; Valsan, M. ; Sandhya, R. ; Mannan, S. L. ; Rodriguez, P. (1994) Influence of weld discontinuities on strain controlled fatigue behavior of 308 stainless steel weld metal Journal of Engineering Materials and Technology, 116 (2). pp. 193-199. ISSN 0094-4289

Sandhya, R. ; Veeramani, A. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (1994) On specimen geometry effects in strain-controlled low-cycle fatigue International Journal of Fatigue, 16 (3). pp. 202-208. ISSN 0142-1123

Choudhary, B. K. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (1994) Effects of strain rate and temperature on tensile deformation and fracture behaviour of forged thick section 9Cr-1Mo ferritic steel International Journal of Pressure Vessels and Piping, 58 (2). pp. 151-160. ISSN 0308-0161

Bhanu Sankara Rao, K. ; Sandhya, R. ; Mannan, S. L. (1993) Creep-fatigue interaction behaviour of type 308 stainless steel weld metal and type 304 stainless steel base metal International Journal of Fatigue, 15 (3). pp. 221-229. ISSN 0142-1123

Bhanu Sankara Rao, K. ; Valsan, M. ; Sandhya, R. ; Mannan, S. L. ; Rodriguez, P. (1993) An assessment of cold work effects on strain-controlled low-cycle fatigue behavior of type 304 stainless steel Metallurgical and Materials Transactions A, 24 (4). pp. 913-924. ISSN 1073-5623

Choudhary, B. K. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Kashyap, B. P. (1992) Development of fatigue design curves for thick-section 9Cr-1Mo ferritic steel forgings International Journal of Fatigue, 14 (4). pp. 219-223. ISSN 0142-1123

Valsan, M. ; Parameswaran, P. ; Bhanu Sankara Rao, K. ; Vijayalakshmi, M. ; Mannan, S. L. ; Shastry, D. H. (1992) High-temperature low-cycle fatigue behavior of a NIMONIC PE-16 superalloy-Correlation with deformation and fracture Metallurgical and Materials Transactions A, 23 (6). pp. 1751-1761. ISSN 1073-5623

Valsan, M. ; Bhanu Sankara Rao, K. ; Sandhya, R. ; Mannan, S. L. (1992) High temperature, low cycle fatigue behaviour of AISI type 316LN base metal, 316LN-316 weld joint and 316 all-weld metal Materials Science and Engineering: A, 149 (2). L9-L12. ISSN 0921-5093

Choudhary, B. K. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (1991) High temperature low cycle fatigue properties of a thick-section 9wt.%Cr-1wt.%Mo ferritic steel forging Materials Science and Engineering: A, 148 (2). pp. 267-278. ISSN 0921-5093

Mathew, M. D. ; Sasikala, G. ; Bhanu Sankara Rao, K. ; Mannan, S. L. (1991) Influence of carbon and nitrogen on the creep properties of type 316 stainless steel at 873 K Materials Science and Engineering: A, 148 (2). pp. 253-260. ISSN 0921-5093

Srinivasan, V. S. ; Sandhya, R. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Raghavan, K. S. (1991) Effects of temperature on the low cycle fatigue behaviour of nitrogen alloyed type 316L stainless steel International Journal of Fatigue, 13 (6). pp. 471-478. ISSN 0142-1123

Bhanu Sankara Rao, K. ; Valsan, M. ; Mannan, S. L. (1990) Strain-controlled low cycle fatigue behaviour of type 304 stainless steel base material, type 308 stainless stell weld metal and 304-308 stainless steel weldments Materials Science and Engineering: A, 130 (1). pp. 67-82. ISSN 0921-5093

Laha, K. ; Bhanu Sankara Rao, K. ; Mannana, S. L. (1990) Creep behaviour of post-weld heat-treated 2.25Cr-1Mo ferritic steel base, weld metal and weldments Materials Science and Engineering: A, 129 (2). pp. 183-195. ISSN 0921-5093

Bhanu Sankara Rao, K. ; Meurer, H. -P. ; Schuster, H. (1988) Creep-fatigue interaction of inconel 617 at 950°C in simulated nuclear reactor helium Materials Science and Engineering: A, 104 . pp. 37-51. ISSN 0921-5093

Bhanu Sankara Rao, K. ; Schiffers, H. ; Schuster, H. ; Nickel, H. (1988) Influence of time and temperature dependent processes on strain controlled low cycle fatigue behavior of alloy 617 Metallurgical and Materials Transactions A, 19 (2). pp. 359-371. ISSN 1073-5623

Seetharaman, V. ; Bhanu Sankara Rao, K. ; Sundararaman, D. ; Rodriguez, P. (1987) Precipitation and tensile deformation behaviour of a nimonic 105 superalloy Acta Metallurgica, 35 (3). pp. 565-575. ISSN 0001-6160

Bhanu Sankara Rao, K. ; Valsan, M. ; Sandhya, R. ; Ray, S. K. ; Mannan, S. L. ; Rodriguez, P. (1985) On the failure condition in strain-controlled low cycle fatigue International Journal of Fatigue, 7 (3). pp. 141-147. ISSN 0142-1123

Seetharaman, V. ; Bhanu Sankara Rao, K. ; Mannan, S. L. ; Rodriguez, P. (1984) Microstructure and mechanical properties of a nimonic PE 16 superalloy subjected to double-aging treatments Materials Science and Engineering, 63 (1). pp. 35-50. ISSN 0025-5416

Bhanu Sankara Rao, K. ; Seetharaman, V. ; Mannan, S. L. ; Rodriguez, P. (1983) Effect of long-term exposure at elevated temperatures on the structure and properties of a nimonic PE 16 superalloy Materials Science and Engineering, 58 (1). pp. 93-106. ISSN 0025-5416