Browse by Fellow

Patel, Manish ; Reddy, Janardhan J. ; Bhanu Prasad, V. V. ; Jayaram, Vikram (2012) Strength of hot pressed ZrB₂–SiC composite after exposure to high temperatures (1000–1700°C) Journal of the European Ceramic Society, 32 (16). pp. 4455-4467. ISSN 0955-2219

Verma, Nisha ; Cadambi, Sumanth ; Jayaram, Vikram ; Biswas, Sanjay Kumar (2012) Micromechanisms of damage nucleation during contact deformation of columnar multilayer nitride coatings Acta Materialia, 60 (6-7). pp. 3063-3073. ISSN 1359-6454

Patel, Manish ; Reddy, J. J. ; Bhanu Prasad, V. V. ; Subrahmanyam, J. ; Jayaram, Vikram (2012) Residual strength of hot pressed zirconium diboride (ZrB₂) after exposure to high temperatures Materials Science and Engineering: A, 535 . pp. 189-196. ISSN 0921-5093

Verma, Nisha ; Jayaram, Vikram (2012) The influence of Zr layer thickness on contact deformation and fracture in a ZrN–Zr multilayer coating Journal of Materials Science, 47 (4). pp. 1621-1630. ISSN 0022-2461

Saha, B. P. ; Johnson, R. ; Jayaram, V. (2012) Comparative evaluation of thermal conductivity of zirconia solid and honeycomb structures Experimental Heat Transfer, 25 (4). pp. 267-281. ISSN 0891-6152

Jaya B, Nagamani ; Jayaram, Vikram ; Biswas, Sanjay Kumar (2012) A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests Philosophical Magazine, 92 (25-27). pp. 3326-3345. ISSN 1478-6435

Krishnan, R. ; David, C. ; Ajikumar, P. K. ; Dash, S. ; Tyagi, A. K. ; Jayaram, V. ; Raj, Baldev (2011) Reactive pulsed laser deposition and characterization of niobium nitride thin films Surface and Coatings Technology, 206 (6). pp. 1196-1202. ISSN 0257-8972

Pal, Soupitak ; Verma, Nisha ; Jayaram, Vikram ; Biswas, Sanjay Kumar ; Riddle, Yancy (2011) Characterization of phase transformation behaviour and microstructural development of electroless Ni–B coating Materials Science and Engineering: A, 528 (28). pp. 8269-8276. ISSN 0921-5093

Mahato, Anirban ; Verma, Nisha ; Jayaram, Vikram ; Biswas, S. K. (2011) Severe wear of a near eutectic aluminium-silicon alloy Acta Materialia, 59 (15). pp. 6069-6082. ISSN 1359-6454

Zafir Alam, Md. ; Srivathsa, B. ; Kamat, S. V. ; Jayaram, V. ; Das, D. K. (2011) Microtensile testing of a free-standing Pt-aluminide bond coat Materials & Design, 32 (3). pp. 1242-1252. ISSN 0261-3069

Paul, Arindam ; Jayaram, Vikram (2011) Deformation and structural densification in Al₂O₃-Y₂O₃ glass Acta Materialia, 59 (1). pp. 82-92. ISSN 1359-6454

Zafir Alam, Md. ; Chatterjee, D. ; Muraleedharan, K. ; Nandy, T. K. ; Kamat, S. V. ; Jayaram, V. ; Das, D. K. (2011) Effect of strain rate on ductile-to-brittle transition temperature of a free-standing Pt-aluminide bond coat Metallurgical and Materials Transactions A, 42 (6). pp. 1431-1434. ISSN 1073-5623

Zafir Alam, Md. ; Srivathsa, B. ; Kamat, S. V. ; Jayaram, V. ; Das, D. K. (2011) Study of brittle-to-ductile-transition in Pt-aluminide bond coat using micro-tensile testing method Transactions of the Indian Institute of Metals, 64 (1-2). pp. 57-61. ISSN 0019-493X

Rangaraja, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2010) Reactive hot pressing of ZrB₂-ZrC_x ultra-high temperature ceramic composites with the addition of SiC particulate Journal of the European Ceramic Society, 30 (15). pp. 3263-3266. ISSN 0955-2219

Zafir Alam, Md. ; Chatterjee, D. ; Kamat, S. V. ; Jayaram, V. ; Das, D. K. (2010) Evaluation of ductile-brittle transition temperature (DBTT) of aluminide bond coats by micro-tensile test method Materials Science and Engineering: A, 527 (26). pp. 7147-7150. ISSN 0921-5093

Kavitha, Ranganathan ; Jayaram, Vikram (2010) Deposition of ZnO films by combustion flame pyrolysis of solution precursors International Journal of Applied Ceramic Technology, 7 (4). pp. 482-492. ISSN 1546-542X

Nachiappan, Chidambaram ; Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2010) Synthesis and densification of monolithic zirconium carbide by reactive hot pressing Journal of the American Ceramic Society, 93 (5). pp. 1341-1346. ISSN 0002-7820

Mahato, Anirban ; Perry, Thomas A. ; Jayaram, Vikram ; Biswas, S. K. (2010) Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat Wear, 268 (9-10). pp. 1080-1090. ISSN 0043-1648

Krishnan, R. ; Mathews, Tom ; Balamurugan, A. K. ; Dash, S. ; Tyagi, A. K. ; Baldev Raj, ; Jayaram, Vikram (2010) Reactive pulsed laser deposition of titanium nitride thin film: optimization of process parameters using secondary ion mass spectrometry Applied Surface Science, 256 (10). pp. 3077-3080. ISSN 0169-4332

Zafir Alam, Md. ; Srivathsa, B. ; Kamat, S. V. ; Jayaram, V. ; Hazari, N. ; Das, D. K. (2010) Mechanism of failure in a free-standing Pt-aluminide bond coat during tensile testing at room temperature Materials Science and Engineering: A, 527 (3). pp. 842-848. ISSN 0921-5093

Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2010) Fabrication and mechanisms of densification of ZrB₂-based ultra high temperature ceramics by reactive hot pressing Journal of the European Ceramic Society, 30 (1). pp. 129-138. ISSN 0955-2219

Potnis, Prashant ; Holtzinger, Jennifer ; Das, Dipak ; Jayaram, Vikram ; Biswas, S. K. (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams Surface and Coatings Technology, 204 (5). pp. 586-592. ISSN 0257-8972

Krishnan, R. ; Amirthapandian, S. ; Mangamma, G. ; Ramaseshan, R. ; Dash, S. ; Tyagi, A. K. ; Jayaram, V. ; Baldev, Raj (2009) Implantation induced hardening of nanocrystalline titanium thin films Journal of Nanoscience and Nanotechnology, 9 (9). pp. 5461-5466. ISSN 1533-4880

Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2009) Low-Temperature Densification of TiN-TiB₂ Composites through reactive hot pressing with excess Ti additions Journal of the American Ceramic Society, 92 (2). pp. 311-317. ISSN 0002-7820

Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2008) Processing of refractory metal borides, carbides and nitrides Key Engineering Materials, 395 . pp. 69-88. ISSN 1013-9826

Rangaraj, Lingappa ; Suresha, Siriyara J. ; Divakar, Canchi ; Jayaram, Vikram (2008) Low-temperature processing of ZrB₂-ZrC composites by reactive hot pressing Metallurgical and Materials Transactions A, 39 (7). pp. 1496-1505. ISSN 1073-5623

Saravanan, S. ; Srinivas, G. Hari ; Jayaram, V. ; Paulraj, M. ; Asokan, S. (2008) Synthesis and characterization of Y₃Al₅O₁₂ and ZrO₂-Y₂O₃ thermal barrier coatings by combustion spray pyrolysis Surface and Coatings Technology, 202 (19). pp. 4653-4659. ISSN 0257-8972

Patro, Debdutt ; Jayaram, Vikram (2008) Kinetics of pressureless infiltration of Al-Mg melts into porous alumina preforms Metallurgical and Materials Transactions B, 39 (1). pp. 108-115. ISSN 1073-5615

Suresha, S. J. ; Gunda, R. ; Jayaram, V. ; Biswas, S. K. (2007) Effect of residual stress on the fracture strength of columnar TiN films Journal of Materials Research, 22 (12). pp. 3501-3506. ISSN 0884-2914

Sellappan, Pathikumar ; Jayaram, Vikram ; Chokshi, Atul Harish ; Divakar, Canchi (2007) Synthesis of bulk, dense, nanocrystalline yttrium aluminum garnet from amorphous powders Journal of the American Ceramic Society, 90 (11). pp. 3638-3641. ISSN 0002-7820

Patro, Debdutt ; Bhattacharyya, Saswata ; Jayaram, Vikram (2007) Flow kinetics in porous ceramics: understanding with non-uniform capillary models Journal of the American Ceramic Society, 90 (10). pp. 3040-3046. ISSN 0002-7820

Das, Sarmistha ; Varalakshmi, K. ; Jayaram, V. ; Biswas, S. K. (2007) Ultra mild wear in lubricated tribology of an aluminium alloy Journal of Tribology, 129 (4). pp. 942-951. ISSN 0742-4787

Kavitha, R. ; Meghani, S. ; Jayaram, V. (2007) Synthesis of titania films by combustion flame spray pyrolysis technique and its characterization for photocatalysis Materials Science and Engineering: B - Solid-State Materials for Advanced Technology, 139 (2-3). pp. 134-140. ISSN 0921-5107

Math, Souvik ; Horn, Roger ; Jayaram, Vikram ; Biswas, Sanjay Kumar (2007) A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in surface force apparatus Journal of Colloid and Interface Science, 308 (2). pp. 551-561. ISSN 0021-9797

Rao, Boddapati Srinivasa ; Rodel, Jurgen ; Jayaram, Vikram (2007) Crack growth resistance (R-curve) behaviour and thermo-physical properties of Al₂O₃ particle-reinforced AlN/Al matrix composites Composites Part A: Applied Science and Manufacturing, 38 (3). pp. 1038-1050. ISSN 1359-835X

Kavitha, R. ; Jayaram, V. (2007) Band-gap engineering in Zno-Mgo films prepared by combustion flame pyrolysis of solution precursors Journal of Electronic Materials, 36 (10). pp. 1326-1332. ISSN 0361-5235

Suresha, S. J. ; Math, S. ; Jayaram, V. ; Biswas, S. K. (2007) Toughening through multilayering in TiN-AlTiN films Philosophical Magazine, 87 (17). pp. 2521-2539. ISSN 1478-6435

Kavitha, R. ; Jayaram, V. (2006) Deposition and characterization of alumina films produced by combustion flame pyrolysis Surface and Coatings Technology, 201 (6). pp. 2491-2499. ISSN 0257-8972

Mukherjee, S. ; Jayaram, V. ; Biswas, S. K. (2006) Validation of stresses and stress intensity factor in a notched bilayer system under four point bending, as determined by the solution of the Navier's equation International Journal of Mechanical Sciences, 48 (11). pp. 1287-1294. ISSN 0020-7403

Suresh, S. J. ; Bhide, R. ; Jayaram, V. ; Biswas, S. K. (2006) Processing, microstructure and hardness of TiN/(Ti, Al)N multilayer coatings Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 429 (1-2). pp. 252-260. ISSN 0921-5093

Jayaram, V. ; Bhowmick, S. ; Xie, Z. H. ; Math, S. ; Hoffman, M. ; Biswas, S. K. (2006) Contact deformation of TiN coatings on metallic substrates Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 423 (1-2). pp. 8-13. ISSN 0921-5093

Math, S. ; Jayaram, V. ; Biswas, S. K. (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate Journal of Materials Research, 21 (3). pp. 783-790. ISSN 0884-2914

Math, Souvik ; Jayaram, Vikram ; Biswas, S. K. (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part I. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system Journal of Materials Research, 21 (3). pp. 774-782. ISSN 0884-2914

Rao, B. S. ; Hemambar, Ch. ; Pathak, A. V. ; Patel, K. J. ; Rodel, J. ; Jayaram, V. (2006) Al/SiC carriers for microwave integrated circuits by a new technique of pressureless infiltration IEEE Transactions on Electronics Packaging Manufacturing, 29 (1). pp. 58-63. ISSN 1521-334X

Math, Souvik ; Suresha, S. J. ; Jayaram, V. ; Biswas, S. K. (2006) Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity Journal of Materials Science, 41 (23). pp. 7830-7837. ISSN 0022-2461

Thangamani, Nithyanantham ; Gandhi, Ashutosh S. ; Jayaram, Vikram ; Chokshi, Atul Harish (2005) Low-temperature high-Pressure consolidation of amorphous Al₂O₃-15 mol% Y₂O₃ Journal of the American Ceramic Society, 88 (10). pp. 2696-2701. ISSN 0002-7820

Bhowmick, S. ; Bhide, R. ; Hoffman, M. ; Jayaram, V. ; Biswas, S. K. (2005) Fracture mode transitions during indentation of columnar TiN coatings on metal Philosophical Magazine, 85 (25). 2927 - 2945. ISSN 1478-6435

Gunda, R. ; Biswas, S. K. ; Bhowmick, S. ; Jayaram, V. (2005) Mechanical properties of rough TiN coating deposited on steel by cathodic arc evaporation technique Journal of the American Ceramic Society, 88 (7). pp. 1831-1837. ISSN 0002-7820

Bhowmick, S. ; Jayaram, V. ; Biswas, S. K. (2005) Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves Acta Materialia, 53 (8). pp. 2459-2467. ISSN 1359-6454

Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2004) Reactive hot pressing of titanium nitride-titanium diboride composites at moderate pressures and temperatures Journal of the American Ceramic Society, 87 (10). pp. 1872-1878. ISSN 0002-7820

Bhowmick, S. ; Xie, Z-H. ; Hoffman, M. ; Jayaram, V. ; Biswas, S. K. (2004) Nature of contact deformation of TiN films on steel Journal of Materials Research, 19 (9). pp. 2616-2624. ISSN 0884-2914

Kavitha, R. ; Hegde, S. R. ; Jayaram, Vikram (2003) Oxide films by combustion pyrolysis of solution precursors Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 359 (1-2). pp. 18-23. ISSN 0921-5093

Bhowmick, S. ; Kale, A. N. ; Jayaram, V. ; Biswas, S. K. (2003) Contact damage in TiN coatings on steel Thin Solid Films, 436 (2). pp. 250-258. ISSN 0040-6090

Gandhi, A. S. ; Jayaram, V. (2003) Plastically deforming amorphous ZrO₂-Al₂O₃ Acta Materialia, 51 (6). pp. 1641-1649. ISSN 1359-6454

Choudhury, Samrat ; Gandhi, Ashutosh S. ; Jayaram, Vikram (2003) Bulk, dense, nanocrystalline yttrium aluminum garnet by consolidation of amorphous powders at low temperatures and high pressures Journal of the American Ceramic Society, 86 (2). pp. 247-251. ISSN 0002-7820

Swaminathan, S. ; Rao, B. Srinivasa ; Jayaram, V. (2002) The influence of oxygen impurities on the formation of AlN-Al composites by infiltration of molten Al-Mg Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 337 (1-2). pp. 134-139. ISSN 0921-5093

Swaminathan, S. ; Rao, B. Srinivasa ; Jayaram, V. (2002) The production of AlN-rich matrix composites by the reactive infiltration of Al alloys in nitrogen Acta Materialia, 50 (12). pp. 3095-3106. ISSN 1359-6454

Gandhi, A. S. ; Jayaram, V. (2002) Pressure consolidation of amorphous ZrO₂-Al₂O₃ by plastic deformation of powder particles Acta Materialia, 50 (8). pp. 2137-2149. ISSN 1359-6454

Srinivasa Rao, B. ; Jayaram, V. (2001) New technique for pressureless infiltration of Al alloys into Al₂O₃ preforms Journal of Materials Research, 16 (10). pp. 2906-2913. ISSN 0884-2914

Ullal, C. K. ; Balasubramaniam, K. R. ; Gandhi, A. S. ; Jayaram, V. (2001) Non-equilibrium phase synthesis in Al₂O₃-Y₂O₃ by spray pyrolysis of nitrate precursors Acta Materialia, 49 (14). pp. 2691-2699. ISSN 1359-6454

Rao, B. Srinivasa ; Jayaram, V. (2001) Pressureless infiltration of Al-Mg based alloys into Al₂O₃ preforms: mechanisms and phenomenology Acta Materialia, 49 (13). pp. 2373-2385. ISSN 1359-6454

Bhatia, Tania ; Chattopadhyay, Kamanio ; Jayaram, Vikram (2001) Effect of rapid solidification on microstructural evolution in MgO-MgAl₂O₄ Journal of the American Ceramic Society, 84 (8). pp. 1873-1880. ISSN 0002-7820

Hemambar, Ch. ; Rao, B. Srinivasa ; Jayaram, V. (2001) Al-Sic electronic packages with controlled thermal expansion coefficient by a new method of pressureless infiltration Materials and Manufacturing Processes, 16 (6). pp. 779-788. ISSN 1042-6914

Gandhi, A. S. ; Jayaram, V. ; Chokshi, A. H. (2001) Low temperature densification behaviour of metastable phases in ZrO₂-Al₂O₃ powders produced by spray pyrolysis Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 304-306 . pp. 785-789. ISSN 0921-5093

Jayaram, Vikram ; Rani, B. Sirisha (2001) Soft chemical routes to the synthesis of extended solid solutions of wurtzite ZnO-MO (M=Mg,Co,Ni) Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 304-306 . pp. 800-804. ISSN 0921-5093

Nagendra, N. ; Jayaram, V. (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al₂O₃/Al-AlN composites Journal of Materials Research, 15 (5). pp. 1145-1153. ISSN 0884-2914

Nagendra, N. ; Jayaram, Vikram (2000) Fracture and R-curves in high-volume fraction Al₂O₃/Al composites Journal of Materials Research, 15 (5). pp. 1131-1144. ISSN 0884-2914

Gandhi, Ashutosh S. ; Jayaram, Vikram ; Chokshi, Atul H. (1999) Dense amorphous zirconia-alumina by low-temperature consolidation of spray-pyrolyzed powders Journal of the American Ceramic Society, 82 (10). pp. 2613-2618. ISSN 0002-7820

Nagendra, N. ; Rao, B. S ; Jayaram, V. (1999) Microstructures and properties of Al₂O₃/Al-AlN composites by pressureless infiltration of Al-alloys Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 269 (1-2). pp. 26-37. ISSN 0921-5093

Bhatia, Tania ; Chattopadhyay, K. ; Jayaram, Vikram (1999) Segregation in the MgO-MgAl₂O₄ system processed from nitrate precursors Journal of Materials Research, 14 (08). pp. 3319-3327. ISSN 0884-2914

Jayaram, V. ; Biswas, S. K. (1999) Wear of Al₂O₃-SiC-(Al,Si) melt oxidised ceramic composites Wear, 225-229 . pp. 1322-1326. ISSN 0043-1648

Jayaram, V. ; Viswanathan, N. N. ; Abinandanan, T. A. (1999) A dislocation pile-up model for the yield stress of a composite Acta Materialia, 47 (5). pp. 1635-1643. ISSN 1359-6454

Mishra, R. S. ; Jayaram, V. ; Majumdar, B. ; Lesher, C. E. ; Mukherjee, A. K. (1999) Preparation of a ZrO₂-Al₂O₃ nanocomposite by high-pressure sintering of spray-pyrolyzed powders Journal of Materials Research, 14 (03). pp. 834-840. ISSN 0884-2914

Jayaram, Vikram ; Rajkumar, J. ; Rani, B. Sirisha (1999) Synthesis of metastable, wurzite-based zinc oxide-cobalt(II) oxide solid solutions by spray pyrolysis Journal of the American Ceramic Society, 82 (2). pp. 473-476. ISSN 0002-7820

Singh, R. Arvind ; Jayaram, Vikram ; Biswas, S. K. (1999) Abrasion of Al₂O₃-SiC - (Al,Si) composites made by melt oxidation Journal of Materials Research, 14 (1). pp. 64-67. ISSN 0884-2914

Narayan, S. P. ; Basu, K. ; Prasad, Y. V. R. K. ; Jayaram, V. ; Das, B. N. (1998) A study of the formability of melt spun Nd-Fe-B magnets Scripta Materialia, 38 (11). pp. 1725-1730. ISSN 1359-6462

Jayaram, V. ; Mishra, R. S. ; Majumdar, B. ; Lesher, C. ; Mukherjee, A. (1998) Dense nanometric ZrO₂-Al₂O₃ from spray-pyrolysed powders Colloids and Surfaces A: Physicochemical and Engineering Aspects, 133 (1-2). pp. 25-31. ISSN 0927-7757

Srinivasan, Dheepa ; Jayaram, Vikram ; Das, P. K. ; Chattopadhyay, K. (1998) Nanodispersed microstructures on laser mixing of Al-Ni multilayers Scripta Materialia, 38 (6). pp. 857-861. ISSN 1359-6462

Bhatia, Tania ; Chattopadhyay, K. ; Jayaram, Vikram (1997) Effect of liquid precursor pyrolysis on phase selection in the MgO-MgAl₂O₄ system Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 226-228 . pp. 930-937. ISSN 0921-5093

Ravikiran, A. ; Jayaram, Vikram ; Biswas, Sanjay K. (1997) Sliding wear of Al₂O₃-SiC-(Al,Si) composites against a steel counterface Journal of the American Ceramic Society, 80 (1). pp. 219-224. ISSN 0002-7820

Kumar, Sandeep ; Jayaram, Vikram ; Mani, T. V. ; Warrier, K. G. K. (1997) Degradation of Al₂O₃-SiC-Al composites prepared by the oxidative growth of Al-alloys into SiC particulate Journal of Materials Science, 32 (17). pp. 4719-4722. ISSN 0022-2461

Gandhi, A. S. ; Jayaram, Vikram ; Chokshi, Atul Harish (1997) Phase evolution and densification of spray pyrolysed ZrO₂-Al₂O₃ powders Materials Science Forum, 243-245 . pp. 227-232. ISSN 0255-5476

Gandhi, A. S. ; Saravanan, A. ; Jayaram, V. (1996) Containerless processing of ceramics by aerodynamic levitation Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 221 (1-2). pp. 68-75. ISSN 0921-5093

Jayaram, Vikram ; Manna, Rampada ; Kshetrapal, Manjunath G. ; Sarkar, Jaydeep ; Biswas, Sanjay K. (1996) Microstructure control and wear of Al₂O₃-SiC-(Al, Si) composites made by melt oxidation Journal of the American Ceramic Society, 79 (3). pp. 770-772. ISSN 0002-7820

Hanabe, Murali ; Jayaram, Vikram ; Bhaskaran, T. A. (1996) Growth of Al₂O₃/Al composites from Al-Zn alloys Acta Materialia, 44 (2). pp. 819-829. ISSN 1359-6454

Jayaram, V. (1996) The role of volatile solute elements in directed melt oxidation of aluminium alloys Journal of Materials Science, 31 (17). pp. 4591-4598. ISSN 0022-2461

Balmer, Mari Lou ; Lange, Fred F. ; Jayaram, Vikram ; Levi, Carlos G. (1995) Development of nano-composite microstructures in ZrO₂-Al₂O₃ via the solution precursor method Journal of the American Ceramic Society, 78 (6). pp. 1489-1494. ISSN 0002-7820

Salas, Olimpia ; Jayaram, Vikram ; Vlach, Kenneth C. ; Levi, Carlos G. ; Mehrabian, Robert (1995) Early stages of composite formation by oxidation of liquid aluminium alloys Journal of the American Ceramic Society, 78 (3). pp. 609-622. ISSN 0002-7820

Jayaram, V. ; De Graef, M. ; Levi, C. G. (1994) Metastable extension of the fluorite phase field in Y₂O₃-ZrO₂ and its effect on grain growth Acta Metallurgica et Materialia, 42 (6). pp. 1829-1846. ISSN 0956-7151

Dhandapania, S. P. ; Jayaram, V. ; Surappa, M. K. (1994) Growth and microstructure of Al₂O₃-SiC-Si(Al) composites prepared by reactive infiltration of silicon carbide preforms Acta Metallurgica et Materialia, 42 (3). pp. 649-656. ISSN 0956-7151

Jayaram, V. (1992) Directed metal oxidation and infiltration Metals, Materials and Processes, 4 (1). pp. 51-58. ISSN 0970-423X

Jayaram, V. (1992) Ceramic composites by melt oxidation Materials Engineering, 3 (2). pp. 247-259. ISSN 0025-5319

Salas, O. ; Ni, H. ; Jayaram, V. ; Vlach, K. C. ; Levi, C. G. ; Mehrabian, R. (1991) Nucleation and growth of Al₂O₃/metal composites by oxidation of aluminum alloys Journal of Materials Research, 6 (9). pp. 1964-1981. ISSN 0884-2914

Vlach, K. C. ; Salas, O. ; Ni, H. ; Jayaram, V. ; Levi, C. G. ; Mehrabian, R. (1991) A thermogravimetric study of the oxidative growth of Al₂O₃/Al alloy composites Journal of Materials Research, 6 (9). pp. 1982-1995. ISSN 0884-2914

Jayaram, V. ; Levi, C. G. ; Whitney, T. ; Mehrabian, R. (1990) Characterization of Al₂O₃-ZrO₂ powders produced by electrohydrodynamic atomization Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 124 (1). pp. 65-81. ISSN 0921-5093

Jayaram, V. ; Levi, C. G. (1989) The structure of δ-alumina evolved from the melt and the γ → δ transformation Acta Metallurgica, 37 (2). pp. 569-578. ISSN 0001-6160

Rowcliffe, David J. ; Jayaram, Vikram ; Hibbs, Mary K. ; Sinclair, Robert (1988) Compressive deformation and fracture in WC materials Materials Science and Engineering: A, 105-106 . pp. 299-303. ISSN 0025-5416

Levi, C. G. ; Jayaram, V. ; Valencia, J. J. ; Mehrabian, R. (1988) Phase selection in electrohydrodynamic atomization of alumina Journal of Materials Research, 3 (5). pp. 969-983. ISSN 0884-2914

Jayaram, V. ; Dalgleish, B. J. ; Evans, A. G. (1988) Some observations of microstructural changes in alumina induced by Ti inhomogeneities Journal of Materials Research, 3 (4). pp. 764-771. ISSN 0884-2914

Jayaram, V. (1988) The precipitation of alpha-TiO₂ from supersaturated solutions of Ti in alumina crystal structure and morphology Philosophical Magazine Part A, 57 (3). 525- 542. ISSN 0141-8610

Jayaram, V. (1987) Plastic incompatibility and crack nucleation during deformation on four independent slip systems in tungsten carbide-cobalt Acta Metallurgica, 35 (6). pp. 1307-1315. ISSN 0001-6160

Jayaram, V. ; Sinclair, R. ; Rowcliffe, D. J. (1986) Deformation enhanced decarburization of WC-Co Scripta Metallurgica, 20 (1). pp. 55-60. ISSN 0036-9748

Jayaram, V. ; Kronenberg, A. ; Kirby, S. H. ; Rowcliffe, D. J. ; Sinclair, R. (1986) Plastic deformation of WC-Co at high confining pressure Scripta metallurgica, 20 (5). pp. 701-705. ISSN 0036-9748

Jayaram, Vikram ; Sinclalr, Robert (1983) Detection of thin intergranular cobalt layers in WC-Co composites by lattice imaging Journal of the American Ceramic Society, 66 (8). C_137-C_139. ISSN 0002-7820

Jayaram, V. ; Sinclair, R. ; Rowcliffe, D. J. (1983) Intergranular cracking in WC-6% Co: an application of the von mises criterion Acta Metallurgica, 31 (3). pp. 373-378. ISSN 0001-6160