Browse by Fellow

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 139.

Sahoo, Prasana ; Dhara, S. ; Dash, S. ; Baldev Raj, ; Manna, I. ; Tyagi, A. K. (2011) Air trapped nanocavity induced superhydrophobicity on GaN microbelt Applied Physics Letters, 98 (4). 043103_1-043103_3. ISSN 0003-6951

Paul, Gayatri ; Philip, John ; Baldev Raj, ; Das, Prasanta Kumar ; Manna, Indranil (2011) Synthesis, characterization, and thermal property measurement of nano-Al95Zn05 dispersed nanofluid prepared by a two-step process International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3783-3788. ISSN 0017-9310

Mukherjee, S. ; Chakraborty, S. ; Galun, R. ; Estrin, Y. ; Manna, I. (2010) Transport phenomena in conduction mode laser beam welding of Fe-Al dissimilar couple with Ta diffusion barrier International Journal of Heat and Mass Transfer, 53 (23-24). pp. 5274-5282. ISSN 0017-9310

Paul, G. ; Pal, T. ; Manna, I. (2010) Thermo-physical property measurement of nano-gold dispersed water based nanofluids prepared by chemical precipitation technique Journal of Colloid and Interface Science, 349 (1). pp. 434-437. ISSN 0021-9797

Paul, G. ; Chopkar, M. ; Manna, I. ; Das, P. K. (2010) Techniques for measuring the thermal conductivity of nanofluids: a review Renewable & Sustainable Energy Reviews, 14 (7). pp. 1913-1924. ISSN 1364-0321

Bera, S. ; Zuberova, Z. ; Hellmig, R. J. ; Estrin, Y. ; Manna, I. (2010) Synthesis of copper alloys with extended solid solubility and nano Al2O3 dispersion by mechanical alloying and equal channel angular pressing Philosophical Magazine, 90 (11). pp. 1465-1483. ISSN 1478-6435

Majumdar, J. Dutta ; Manna, I. (2010) Mechanical properties of a laser-surface-alloyed magnesium-based alloy (AZ91) with nickel Scripta Materialia, 62 (8). pp. 579-581. ISSN 1359-6462

Pastor, M. ; Goenka, S. ; Maiti, S. ; Biswas, K. ; Manna, I. (2010) Phase evolution, dielectric and impedance spectroscopic study of SrNb2O6 columbite phase Ceramics International, 36 (3). pp. 1041-1045. ISSN 0272-8842

Majumdar, J. Dutta ; Nath, A. K. ; Manna, I. (2010) Studies on laser surface melting of tool steel - Part II: Mechanical properties of the surface Surface and Coatings Technology, 204 (9-10). pp. 1326-1329. ISSN 0257-8972

Majumdar, J. Dutta ; Nath, A. K. ; Manna, I. (2010) Studies on laser surface melting of tool steel-Part I: Surface characterization and it's electrochemical behavior Surface and Coatings Technology, 204 (9-10). pp. 1321-1325. ISSN 0257-8972

Gupta, D. ; Mordike, B. L. ; Shariff, S. ; Padmanabhan, G. ; Manna, I. ; Majumdar, J. Dutta (2010) Laser surface cladding of EN19 steel with stellite 6 for improved wear resistance Lasers in Engineering, 19 (5-6). pp. 317-330. ISSN 0898-1507

Chakrabortya, J. ; Bhattacharjee, D. ; Manna, I. (2009) Development of ultrafine bainite+martensite duplex microstructure in SAE 52100 bearing steel by prior cold deformation Scripta Materialia, 61 (6). pp. 604-607. ISSN 1359-6462

Roy, D. ; Singh, S. S. ; Basu, B. ; Lojkowski, W. ; Mitra, R. ; Manna, I. (2009) Studies on wear behavior of nano-intermetallic reinforced Al-base amorphous/nanocrystalline matrix in situ composite Wear, 266 (11-12). pp. 1113-1118. ISSN 0043-1648

Maiti, S. ; Pastor, M. ; Sundaram, R. S. ; Ravichandran, J. ; Kumar, A. ; Biswas, K. ; Manna, I. (2009) Synthesis and characterization of nanocrystalline dysprosia stabilized zirconia based electrolyte for intermediate-temperature solid oxide fuel cell Journal of Alloys and Compounds, 475 (1-2). pp. 587-591. ISSN 0925-8388

Taha, Z. A. ; Roy, G. G. ; Hajim, K. I. ; Manna, I. (2009) Mathematical modeling of laser-assisted transmission lap welding of polymers Scripta Materialia, 60 (8). pp. 663-666. ISSN 1359-6462

Roy, D. ; Singh, S. S. ; Mitra, R. ; Rosinski, M. ; Michalski, A. ; Lojkowski, W. ; Manna, I. (2009) Synthesis and characterization of precipitation hardened amorphous matrix composite by mechanical alloying and pulse plasma sintering of Al65Cu20Ti15 Philosophical Magazine, 89 (12). pp. 1051-1061. ISSN 1478-6435

Majumdar, J. Dutta ; Manna, I. ; Kumar, Ajeet ; Bhargava, P. ; Nath, A. K. (2009) Direct laser cladding of Co on Ti-6Al-4V with a compositionally graded interface Journal of Materials Processing Technology, 209 (5). pp. 2237-2243. ISSN 0924-0136

Singh, S. S. ; Roy, D. ; Mitra, R. ; Rao, R. V. Subba ; Dayal, R. K. ; Raj, Baldev ; Manna, I. (2009) Studies on laser sintering of mechanically alloyed Al50Ti40Si10 composite Materials Science and Engineering: A, 501 (1-2). pp. 242-247. ISSN 0921-5093

Biswas, A. ; Manna, I. ; Chatterjee, U. K. ; Bhattacharyya, U. ; Majumdar, Dutta (2009) Evaluation of electrochemical properties of thermally oxidised Ti-6Al-4V for bioimplant application Surface Engineering, 25 (2). pp. 141-145. ISSN 0267-0844

Bera, S. ; Lojkowsky, W. ; Manna, I. (2009) Development of wear-resistant Cu-10Cr-3Ag electrical contacts with nano-Al2O3 dispersion by mechanical alloying and high pressure sintering Metallurgical and Materials Transactions A, 40 (13). pp. 3276-3283. ISSN 1073-5623

Biswas, Amit ; Li, Lin ; Chatterjee, U. K. ; Manna, I. ; Majumdar, Jyotsna Dutta (2009) Diode laser assisted surface nitriding of Ti-6Al-4v: properties of the nitrided surface Metallurgical and Materials Transactions A, 40 (12). pp. 3031-3037. ISSN 1073-5623

Chakraborty, J. ; Chattopadhyay, P. P. ; Bhattacharjee, D. ; Manna, I. (2009) Microstructural refinement of bainite and martensite for enhanced strength and toughness in high-carbon low-alloy steel Metallurgical and Materials Transactions A, 41 (11). pp. 2871-2879. ISSN 1073-5623

Roy, D. ; Mitra, R. ; Chudoba, T. ; Witczak, Z. ; Lojkowski, W. ; Fecht, H. -J. ; Manna, I. (2008) Structure and mechanical properties of Al65Cu20Ti15-based amorphous/nanocrystalline alloys prepared by high-pressure sintering Materials Science and Engineering: A, 497 (1-2). pp. 93-100. ISSN 0921-5093

Roy, D. ; Mitra, R. ; Fedyk, R. ; Witczak, Z. ; Lojkowski, W. ; Manna, I. (2008) Synthesis and characterization of in situ nanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite Philosophical Magazine, 88 (24). pp. 3031-3041. ISSN 1478-6435

Roy, D. ; Chakravarty, D. ; Mitra, R. ; Manna, I. (2008) Effect of sintering on microstructure and mechanical properties of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix composite Journal of Alloys and Compounds, 460 (1-2). pp. 320-325. ISSN 0925-8388

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Nath, A. K. ; Manna, I. (2008) Studies on compositionally graded silicon carbide dispersed composite surface on mild steel developed by laser surface cladding Journal of Materials Processing Technology, 203 (1-3). pp. 505-512. ISSN 0924-0136

Kumar, Ashok ; Manna, I. (2008) Ionic conductivity and electrical relaxation of nanocrystalline scandia-stabilized c-zirconia using complex impedance analysis Physica B: Condensed Matter, 403 (13-16). pp. 2298-2305. ISSN 0921-4526

Chakraborty, J. ; Bhattacharjee, D. ; Manna, I. (2008) Austempering of bearing steel for improved mechanical properties Scripta Materialia, 59 (2). pp. 247-250. ISSN 1359-6462

Biswas, A. ; Li, L. ; Chatterjee, U. K. ; Manna, I. ; Pabi, S. K. ; Majumdar, J. Dutta (2008) Mechanical and electrochemical properties of laser surface nitrided Ti-6Al-4V Scripta Materialia, 59 (2). pp. 239-242. ISSN 1359-6462

Basu, A. ; Majumdar, J. Dutta ; Alphonsa, J. ; Mukherjee, S. ; Manna, I. (2008) Corrosion resistance improvement of high carbon low alloy steel by plasma nitriding Materials Letters, 62 (17-18). pp. 3117-3120. ISSN 0167-577X

Mukhopadhyay, N. K. ; Mukherjee, D. ; Bera, S. ; Manna, I. ; Manna, R. (2008) Synthesis and characterization of nano-structured Cu-Zn γ-brass alloy Materials Science and Engineering: A, 485 (1-2). pp. 673-680. ISSN 0921-5093

Mukhopadhyay, N. K. ; Mukherjee, D. ; Dutta, S. ; Manna, R. ; Kim, D. H. ; Manna, I. (2008) Synthesis and characterization of nanocrystalline and amorphous (Al4Cu9)94.5Cr5.5 γ-brass alloy by rapid solidification and mechanical milling Journal of Alloys and Compounds, 457 (1-2). pp. 177-184. ISSN 0925-8388

Manna, I. ; Chattopadhyay, P. P. ; Banhart, F. ; Croopnick, J. ; Fecht, H. -J. (2008) Microstructural evolution of wear-resistant FeCrB and FeCrNiCoB coating alloys during high-energy mechanical attrition Wear, 264 (11-12). pp. 940-946. ISSN 0043-1648

Majumdar, J. Dutta ; Bhattacharyya, U. ; Biswas, A. ; Manna, I. (2008) Studies on thermal oxidation of Mg-alloy (AZ91) for improving corrosion and wear resistance Surface and Coatings Technology, 202 (15). pp. 3638-3642. ISSN 0257-8972

Jha, G. C. ; Ray, S. K. ; Manna, I. (2008) Effect of deposition temperature on the microstructure and electrical properties of Ba0.8Sr0.2TiO3 thin films deposited by radio-frequency magnetron sputtering Thin Solid Films, 516 (10). pp. 3416-3421. ISSN 0040-6090

Basu, A. ; Samant, A. N. ; Harimkar, S. P. ; Majumdar, J. Dutta ; Manna, I. ; Dahotre, Narendra B. (2008) Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glass composition on AISI 4140 steel Surface and Coatings Technology, 202 (12). pp. 2623-2631. ISSN 0257-8972

Chopkar, M. ; Sudarshan, S. ; Das, P. K. ; Manna, I. (2008) Effect of particle size on thermal conductivity of nanofluid Metallurgical and Materials Transactions A, 39 (7). pp. 1535-1542. ISSN 1073-5623

Chopkar, Manoj ; Das, A. K. ; Manna, I. ; Das, P. K. (2008) Pool boiling heat transfer characteristics of ZrO2-water nanofluids from a flat surface in a pool Heat and Mass Transfer, 44 (8). pp. 999-1004. ISSN 0947-7411

Biswas, A. ; Mordike, B. L. ; Manna, I. ; Majumdar, J. Dutta (2008) Studies on laser surface melting of Al-11% Si alloy Lasers in Engineering, 18 (1-2). pp. 95-106. ISSN 0898-1507

Roy, Debdas ; Mitra, R. ; Chudoba, Tadeusz ; Witczak, Zbigniew ; Lojkowski, Witold ; Fecht, Hans J. ; Manna, I. (2008) The mechanical properties of nano-Tio2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering Solid State Phenomena, 140 . pp. 161-166. ISSN 1012-0394

Ravichandran, J. ; Manoj, A. G. ; Liu, J. ; Manna, I. ; Carroll, D. L. (2008) A novel polymer nanotube composite for photovoltaic packaging applications Nanotechnology, 19 (8). 085712_1-085712_5. ISSN 0957-4484

Roy, D. ; Kumari, S. ; Mitra, R. ; Manna, I. (2007) Microstructure and mechanical properties of mechanically alloyed and spark plasma sintered amorphous-nanocrystalline Al65Cu20Ti15 intermetallic matrix composite reinforced with TiO2 nanoparticles Intermetallics, 15 (12). pp. 1595-1605. ISSN 0966-9795

Jha, G. ; Roy, A. ; Dhar, A. ; Manna, I. ; Ray, S. K. (2007) Effect of annealing temperature on the structural and electrical properties of SrBi2Ta2O9 thin films for memory-based applications Physica B: Condensed Matter, 400 (1-2). pp. 33-37. ISSN 0921-4526

Chopkar, M. ; Das, P. K. ; Manna, I. (2007) Thermal characterization of a nanofluid comprising nanocrystalline ZrO2 dispersed in water and ethylene glycol Philosophical Magazine, 87 (29). pp. 4433-4444. ISSN 1478-6435

Samanta, A. ; Manna, I. ; Chattopadhyay, P. P. (2007) Phase evolution in Al-Ni-(Ti, Nb, Zr) powder blends by mechanical alloying Materials Science and Engineering: A, 464 (1-2). pp. 306-314. ISSN 0921-5093

Samanta, A. ; Fecht, H. -J. ; Manna, I. ; Chattopadhyay, P. P. (2007) Development of amorphous phase dispersed Al-rich composites by rolling of mechanically alloyed amorphous Al-Ni-Ti powders with pure Al Materials Chemistry and Physics, 104 (2-3). pp. 434-438. ISSN 0254-0584

Basu, A. ; Dutta Majumdar, J. ; Ghosh Chowdhury, S. ; Ajikumar, P. K. ; Shankar, P. ; Tyagi, A. K. ; Baldev Raj, ; Manna, I. (2007) Microstructural and texture studies of gas nitrided Cr-coated low alloy high carbon steel Surface and Coatings Technology, 201 (16-17). pp. 6985-6992. ISSN 0257-8972

Chopkar, M. ; Kumar, S. ; Bhandari, D. R. ; Das, P. K. ; Manna, I. (2007) Development and characterization of Al2Cu and Ag2Al nanoparticle dispersed water and ethylene glycol based nanofluid Materials Science and Engineering: B, 139 (2-4). pp. 141-148. ISSN 0921-5107

Basu, A. ; Chakraborty, J. ; Shariff, S. M. ; Padmanabham, G. ; Joshi, S. V. ; Sundararajan, G. ; Majumdar, J. Dutta ; Manna, I. (2007) Laser surface hardening of austempered (bainitic) ball bearing steel Scripta Materialia, 56 (10). pp. 887-890. ISSN 1359-6462

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Manna, I. (2007) Friction and wear behavior of laser composite surfaced aluminium with silicon carbide Wear, 262 (5-6). pp. 641-648. ISSN 0043-1648

Rao, K. Ram Mohan ; Mukherjee, S. ; Roy, S. K. ; Richter, E. ; Moller, W. ; Manna, I. (2007) Plasma immersion ion implantation of nitrogen on austenitic stainless steel at variable energy for enhanced corrosion resistance Surface and Coatings Technology, 201 (9-11). pp. 4919-4921. ISSN 0257-8972

Roy, A. ; Tarafder, S. ; Sivaprasad, S. ; Das, Swapan K. ; Manna, I. ; Chattoraj, I. (2007) Fatigue crack growth retardation in an HSLA steel in benign environments International Journal of Fatigue, 29 (2). pp. 254-260. ISSN 0142-1123

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Manna, I. (2007) Laser composite surfacing of AISI 304 stainless steel with titanium boride for improved wear resistance Tribology International, 40 (1). pp. 146-152. ISSN 0301-679X

Biswas, A. ; Chaterjee, U. K. ; Li, Lin ; Manna, I. ; Majumdar, J. Dutta (2007) Laser assisted surface modification of Ti-6Al-4V for bioimplant application Surface Review and Letters, 14 (4). pp. 531-534. ISSN 0218-625X

Biswas, A. ; Li, L. ; Maity, T. T. ; Chatterjee, U. K. ; Mordike, B. B. ; Manna, I. ; Majumdar, J. Dutta (2007) Laser surface treatment of Ti-6Al-4V for bio-implant application Lasers in Engineering, 17 (1-2). pp. 59-73. ISSN 0898-1507

Bera, S. ; Mazumdar, S. ; Ramgopal, M. ; Bhattacharyya, S. ; Manna, I. (2007) Prediction of enthalpy of formation and Gibbs energy change in pseudo-binary (Ti-Zr)(Fe-Cr)2 and pseudo-ternary (Ti-Zr)(Fe-Cr)2-H system using extended Miedema model Journal of Materials Science, 42 (10). pp. 3645-3650. ISSN 0022-2461

Paul, K. Thomas ; Satpathy, S. K. ; Manna, I. ; Chakraborty, K. K. ; Nando, G. B. (2007) Preparation and characterization of nano structured materials from fly ash: a waste from thermal power stations, by high energy ball milling Nanoscale Research Letters, 2 (8). pp. 397-404. ISSN 1931-7573

Biswas, A. ; Bhattacharjee, U. ; Manna, I. ; Majumdar, J. Datta (2007) Surface oxidation of Ti-6Al-4V for bio-implant application Surface Review and Letters, 14 (4). pp. 597-600. ISSN 0218-625X

Dasgupta, S. ; Kim, K. B. ; Ellrich, J. ; Eckert, J. ; Manna, I. (2006) Mechano-chemical synthesis and characterization of microstructure and magnetic properties of nanocrystalline Mn1-xZnxFe2O4 Journal of Alloys and Compounds, 424 (1-2). pp. 13-20. ISSN 0925-8388

Dasguptaa, S. ; Das, J. ; Eckert, J. ; Manna, I. (2006) Influence of environment and grain size on magnetic properties of nanocrystalline Mn-Zn ferrite Journal of Magnetism and Magnetic Materials, 306 (1). pp. 9-15. ISSN 0304-8853

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Nath, A. K. ; Manna, I. (2006) Compositionally graded SiC dispersed metal matrix composite coating on Al by laser surface engineering Materials Science and Engineering: A, 433 (1-2). pp. 241-250. ISSN 0921-5093

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Nath, A. K. ; Manna, I. (2006) In situ dispersion of titanium boride on aluminium by laser composite surfacing for improved wear resistance Surface and Coatings Technology, 201 (3-4). pp. 1236-1242. ISSN 0257-8972

Manna, I. ; Majumdar, J. Dutta ; Chandra, B. Ramesh ; Nayak, S. ; Dahotre, Narendra B. (2006) Laser surface cladding of Fe-B-C, Fe-B-Si and Fe-BC-Si-Al-C on plain carbon steel Surface and Coatings Technology, 201 (1-2). pp. 434-440. ISSN 0257-8972

Chopkar, Manoj ; Das, Prasanta K. ; Manna, I. (2006) Synthesis and characterization of nanofluid for advanced heat transfer applications Scripta Materialia, 55 (6). pp. 549-552. ISSN 1359-6462

Majumdar, J. Dutta ; Ganesan, S. M. ; Manna, I. ; Nath, A. K. (2006) Laser assisted fabrication of Co on Ti-6Al-4V for bio-implant application Physica Status Solidi A, 203 (9). pp. 2236-2240. ISSN 0031-8965

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Nath, A. K. ; Manna, I. (2006) Laser composite surfacing of stainless steel with SiC Physica Status Solidi A, 203 (9). pp. 2260-2265. ISSN 0031-8965

Bera, S. ; Manna, I. (2006) Hexagonal close packed to face centered cubic polymorphic transformation in nanocrystalline titanium-zirconium system by mechanical alloying Journal of Alloys and Compounds, 417 (1-2). pp. 104-108. ISSN 0925-8388

Bera, S. ; Manna, I. (2006) Polymorphic phase transformation in Ti50Zr50 binary alloy by mechanical alloying Materials Science and Engineering: A, 417 (1-2). pp. 110-113. ISSN 0921-5093

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Biswas, D. ; Mordike, B. L. ; Manna, I. (2006) In-situ dispersion of titanium boride on copper by laser composite surfacing for improved wear resistance Lasers in Engineering, 16 (5-6). pp. 333-348. ISSN 0898-1507

Majumdar, J. Dutta ; Galun, R. ; Mordike, B. L. ; Chandra, B. Ramesh ; Manna, I. (2006) Laser composite surfacing of a magnesium alloy with chromium carbide Lasers in Engineering, 16 (5-6). pp. 349-359. ISSN 0898-1507

Biswas, Amit ; Maity, T. K. ; Chatterjee, U. K. ; Manna, I. ; Li, Lin ; Majumdar, J. Dutta (2006) Laser surface nitriding of Ti-6Al-4V for bio-implant application Trends in Biomaterials & Artificial Organs, 20 (1). pp. 68-71. ISSN 0971-1198

Samanta, A. ; Chattopadhyay, P. P. ; Lojkowski, Witold ; Gierlotka, Stanislaw ; Fecht, Hans J. ; Manna, I. (2006) Microstructural evolution during mechanical alloying and hot pressing of a powder blend of aluminium and 316 stainless steel Solid State Phenomena, 114 . pp. 211-218. ISSN 1012-0394

Chattopadhyay, P. P. ; Samanta, A. ; Lojkowski, W. ; Fecht, H. -J. ; Manna, I. (2006) Microstructure/phase evolution in mechanical alloying/milling of stainless steel and aluminum powder blends Metallurgical and Materials Transactions A, 38 (13). pp. 2298-2307. ISSN 1073-5623

Rao, K. Ram Mohan ; Mukherjee, S. ; Raole, P. M. ; Manna, I. (2005) Characterization of surface microstructure and properties of low-energy high-dose plasma immersion ion-implanted 304L austenitic stainless steel Surface and Coatings Technology, 200 (7). pp. 2049-2057. ISSN 0257-8972

Nandi, P. ; Chattopadhyay, P. P. ; Nambissan, P. M. G. ; Banhart, F. ; Fecht, H. J. ; Manna, I. (2005) Microstructural aspects and positron annihilation study on solid state synthesis of amorphous and nanocrystalline Al60-xTi40Six alloys prepared by mechanical alloying Journal of Non Crystalline Solids, 351 (30-32). pp. 2485-2492. ISSN 0022-3093

Majumdar, J. Dutta ; Pinkerton, A. ; Liu, Z. ; Manna, I. ; Li, L. (2005) Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel Applied Surface Science, 247 (1-4). pp. 320-327. ISSN 0169-4332

Manna, I. ; Nandi, P. ; Bandyopadhyay, B. ; Nambissan, P. M. G. ; Ghoshray, K. ; Ghoshray, A. (2005) Solid state amorphization in mechanically alloyed Al-Ti-Si nanocomposites International Journal of Nanoscience, 4 (5-6). pp. 1025-1028. ISSN 0219-581X

Majumdar, J. Dutta ; Nath, A. K. ; Manna, I. (2004) Studies on laser bending of stainless steel Materials Science and Engineering A, 385 (1-2). pp. 113-122. ISSN 0921-5093

Manna, I. ; Nandi, P. ; Nambissan, P. M. G. (2004) Mechanism and kinetics of solid-state amorphization by mechanical alloying of Al65Cu35-xNbx Philosophical Magazine, 84 (33). pp. 3585-3598. ISSN 1478-6435

Nandi, P. ; Nambissan, P. M. G. ; Manna, I. (2004) Amorphisation and intermetallic nanophase formation in ball-milled Al-Ti-Si studied through positron lifetime spectroscopy Journal of Alloys and Compounds, 377 (1-2). pp. 179-187. ISSN 0925-8388

Manna, I. ; Nandi, P. ; Bandyopadhyay, B. ; Ghoshray, K. ; Ghoshray, A. (2004) Microstructural and nuclear magnetic resonance studies of solid-state amorphization in Al-Ti-Si composites prepared by mechanical alloying Acta Materialia, 52 (14). pp. 4133-4142. ISSN 1359-6454

Manna, I. ; Chattopadhyay, P. P. ; Banhart, F. ; Fecht, H. J. (2004) Development of amorphous and nanocrystalline Al65Cu35-xZrx alloys by mechanical alloying Materials Science and Engineering: A, 379 (1-2). pp. 360-365. ISSN 0921-5093

Mukherjee, S. ; Raole, P. M. ; Kumar, A. ; Chattoraj, I. ; Rao, K. R. M. ; Manna, I. (2004) Studies on low-energy nitrogen plasma immersion ion implantation on austenitic stainless steel and Cu-strengthened HSLA-100 steel Surface and Coatings Technology, 186 (1-2). pp. 282-286. ISSN 0257-8972

Manna, I. ; Chattopadhyay, P. P. ; Nandi, P. ; Nambissan, P. M. G. (2004) Positron lifetime studies of the hcp to fcc transformation induced by mechanical attrition of elemental titanium Physics Letters A, 328 (2-3). pp. 246-254. ISSN 0375-9601

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Mordike, B. L. ; Galun, R. ; Manna, I. (2004) Laser surface engineering of a magnesium alloy with Al+Al2O3 Surface and Coatings Technology, 179 (2-3). pp. 297-305. ISSN 0257-8972

Manna, I. ; Chattopadhyay, P. P. ; Banhart, F. ; Fecht, H. -J. (2004) Solid state synthesis of amorphous and/or nanocrystalline Al40Zr40Si20 alloy by mechanical alloying Materials Letters, 58 (3-4). pp. 403-407. ISSN 0167-577X

Majumdar, J. Dutta ; Nath, A. K. ; Kumar, B. Ravi ; Manna, I. (2004) Studies on residual stress developed in laser surface irradiated 0.6% carbon steel Lasers in Engineering, 14 (3-4). pp. 133-151. ISSN 0898-1507

Majumdar, J. Dutta ; Galun, R. ; Mordike, B. L. ; Manna, I. (2003) Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy Materials Science and Engineering A, 361 (1-2). pp. 119-129. ISSN 0921-5093

Nandi, P. ; Chattopadhyay, P. P. ; Pabi, S. K. ; Manna, I. (2003) Solid state synthesis of Al-based amorphous and nanocrystalline Al-Cu-Nb alloys Materials Science and Engineering: A, 359 (1-2). pp. 11-17. ISSN 0921-5093

Majumdar, J. Dutta ; Manna, I. (2003) Laser processing of materials Sadhana (Academy Proceedings in Engineering Sciences), 28 (3-4). pp. 495-562. ISSN 0256-2499

Majumdar, J. Dutta ; Pinkerton, A. ; Liu, Z. ; Manna, I. ; Li, L. (2003) Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel Applied Surface Science, 247 (1-4). pp. 373-377. ISSN 0169-4332

Majumdar, J. Dutta ; Chandra, B. Ramesh ; Galun, R. ; Mordike, B. L. ; Manna, I. (2003) Laser composite surfacing of a magnesium alloy with silicon carbide Composites Science and Technology, 63 (6). pp. 771-778. ISSN 0266-3538

Pham, M. T. ; Rao, K. R. M. ; Manna, I. ; Richter, E. (2003) Enhanced corrosion resistance of austenitic stainless steel by plasma immersion ion implantation of nitrogen Journal of Materials Science Letters, 22 (15). pp. 1099-1100. ISSN 0261-8028

Manna, I. ; Chattopadhyay, P. P. ; Nandi, P. ; Banhart, F. ; Fecht, H. -J. (2003) Formation of face-centered-cubic titanium by mechanical attrition Journal of Applied Physics, 93 (3). pp. 1520-1524. ISSN 0021-8979

Mukherjee, S. ; Chakraborty, J. ; Gupta, S. ; Raole, P. M. ; John, P. I. ; Rao, K. R. M. ; Manna, I. (2002) Low- and high-energy plasma immersion ion implantation for modification of material surfaces Surface & Coatings Technology, 156 (1-3). pp. 103-109. ISSN 0257-8972

Rao, K. Ram Mohan ; Mukherjee, S. ; Raole, P. M. ; Manna, I. (2002) Low energy isothermal plasma-immersion ion implantation of nitrogen for enhanced hardness of AISI 52100 ball bearing steel Surface and Coatings Technology, 150 (1). pp. 80-87. ISSN 0257-8972

Chattopadhyay, P. P. ; Manna, I. (2002) Effect of partial substitution of Cu in Al65Cu35 by transition metal in mechanical alloying of Al65Cu20TM15 Materials and Manufacturing Processes, 17 (5). pp. 583-594. ISSN 1042-6914

Majumdar, J. Dutta ; Mordike, B. L. ; Roy, S. K. ; Manna, I. (2002) High-temperature oxidation behavior of laser-surface-alloyed Ti with Si and Si + Al Oxidation of Metals, 57 (5-6). pp. 473-498. ISSN 0030-770X

Majumdar, J. Dutta ; Maiwald, T. ; Galun, R. ; Mordike, B. L. ; Manna, I. (2002) Laser surface alloying of an Mg alloy with Al + Mn to improve corrosion resistance Lasers in Engineering, 12 (3). pp. 147-169. ISSN 0898-1507

Majumdar, J. Dutta ; Manna, I. (2002) A mathematical model to predict the thermal history and microstructure developed in laser surface alloying Lasers in Engineering, 12 (3). pp. 171-190. ISSN 0898-1507

Chattopadhyay, P. P. ; Manna, I. (2002) A thermodynamic model of the BCC → FCC polymorphic change in niobium due to nanocrystallization by mechanical milling Key Engineering Materials, 227 . pp. 87-92. ISSN 1013-9826

Chattopadhyay, P. P. ; Nambissan, P. M. G. ; Pabi, S. K. ; Manna, I. (2001) Polymorphic transformation and lattice expansion in nanocrystalline niobium revealed by positron annihilation at grain boundaries Applied Surface Science, 182 (3-4). pp. 308-312. ISSN 0169-4332

Chattopadhyay, P. P. ; Pabi, S. K. ; Manna, I. (2001) A metastable allotropic transformation in Nb induced by planetary ball milling Materials Science and Engineering: A, 304-306 . pp. 424-428. ISSN 0921-5093

Chattopadhyay, P. P. ; Pabi, S. K. ; Manna, I. (2001) On the enhancement of diffusion kinetics in nanocrystalline materials Materials Chemistry and Physics, 68 (1-3). pp. 80-84. ISSN 0254-0584

Chattopadhyay, P. P. ; Manna, I. ; Talapatra, S. ; Pabi, S. K. (2001) A mathematical analysis of milling mechanics in a planetary ball mill Materials Chemistry and Physics, 68 (1-3). pp. 85-94. ISSN 0254-0584

Roy, A. ; Manna, I. (2001) Laser surface engineering to improve wear resistance of austempered ductile iron Materials Science and Engineering A, 297 (1-2). pp. 85-93. ISSN 0921-5093

Chattopadhyay, P. P. ; Nambissan, P. M. G. ; Pabi, S. K. ; Manna, I. (2001) Polymorphic bcc to fcc transformation of nanocrystalline niobium studied by positron annihilation Physical Review B, 63 (5). 054107_1-054107_7. ISSN 1098-0121

Manna, I. ; Chattopadhyay, P. P. ; Chatterjee, B. ; Pabi, S. K. (2001) Codeposition of nanocrystalline aluminides on a copper substrate Journal of Materials Science, 36 (6). pp. 1419-1424. ISSN 0022-2461

Nandi, P. ; Chattopadhyay, P. P. ; Pabi, S. K. ; Manna, I. (2001) Development of amorphous and nano-aluminide dispersed Al-matrix composites by mechanical alloying Materials Physics and Mechanics, 4 . pp. 116-120. ISSN 1605-8119

Roy, A. ; Manna, I. (2000) Mathematical modeling of localized melting around graphite nodules during laser surface hardening of austempered ductile iron Optics and Lasers in Engineering, 34 (4-6). pp. 369-383. ISSN 0143-8166

Dutta Majumdara, J. ; Mordike, B. L. ; Manna, I. (2000) Friction and wear behavior of Ti following laser surface alloying with Si, Al and Si+Al Wear, 242 (1-2). pp. 18-27. ISSN 0043-1648

Das, A. ; Manna, I. ; Pabi, S. K. (1999) A numerical model of peritectoid transformation Metallurgical and Materials Transactions A, 30 (10). pp. 2563-2573. ISSN 1073-5623

Majumdar, J. Dutta ; Manna, I. (1999) Laser surface alloying of copper with chromium II. Improvement in mechanical properties Materials Science and Engineering: A, 268 (1-2). pp. 227-235. ISSN 0921-5093

Majumdar, J. Dutta ; Manna, I. (1999) Laser surface alloying of copper with chromium: I. Microstructural evolution Materials Science and Engineering: A, 268 (1-2). pp. 216-226. ISSN 0921-5093

Majumdar, J. Dutta ; Weisheit, A. ; Mordike, B. L. ; Manna, I. (1999) Laser surface alloying of Ti with Si, Al and Si+Al for an improved oxidation resistance Materials Science and Engineering A, 266 (1-2). pp. 123-134. ISSN 0921-5093

Pabi, S. K. ; Manna, I. ; Murty, B. S. (1999) Alloying behaviour in nanocrystalline materials during mechanical alloying Bulletin of Materials Science, 22 (3). pp. 321-327. ISSN 0250-4707

Manna, I. ; Jha, J. N. ; Pabi, S. K. (1999) Kinetics of discontinuous precipitation and type I discontinuous coarsening in Zn-4 at % Ag alloy Journal of Materials Science, 34 (4). pp. 773-781. ISSN 0022-2461

Das, A. ; Pabi, S. K. ; Manna, I. ; Gust, W. (1999) Kinetics of the eutectoid transformation in the Cu-In system Journal of Materials Science, 34 (8). pp. 1815-1821. ISSN 0022-2461

Das, A. ; Gust, W. ; Pabi, S. K. ; Manna, I. (1999) Metastable and equilibrium decomposition of the eutectoid β-phase in the Cu-In system Materials Science Forum, 294-296 . pp. 485-488. ISSN 0255-5476

Chatterjee, P. P. ; Pabi, S. K. ; Manna, I. (1999) An allotropic transformation induced by mechanical alloying Journal of Applied Physics, 86 (10). pp. 5912-5914. ISSN 0021-8979

Pabi, S. K. ; Das, D. ; Mahapatra, T. K. ; Manna, I. (1998) Mathematical modelling of the mechanical alloying kinetics Acta Materialia, 46 (10). pp. 3501-3510. ISSN 1359-6454

Manna, I. (1998) Grain boundary migration in solid state discontinuous reactions Interface Science, 6 (1-2). pp. 113-131. ISSN 0927-7056

Manna, I. ; Das, A. ; Pabi, S. K. ; Gust, W. (1997) Interphase boundary chemical diffusion data of Cu-20.1 at.% in trough kinetic analysis of eutectoid transformation Defect and Diffusion Forum, 143-147 . pp. 1551-1556. ISSN 1012-0386

Pabi, S. K. ; Joardar, J. ; Manna, I. ; Murty, B. S. (1997) Nanocrystalline phases in Cu---Ni, Cu---Zn and Ni---Al systems by mechanical alloying Nanostructured Materials, 9 (1-8). pp. 149-152. ISSN 0965-9773

Manna, I. ; Bala, P. K. ; Pabi, S. K. ; Gust, W. (1996) Discontinuous precipitation in a Cd-6 at.% Ag alloy Acta Materialia, 44 (11). pp. 4587-4595. ISSN 1359-6454

Manna, I. ; Jha, J. N. ; Pabi, S. K. (1996) Mechanism and kinetics of type II discontinuous coarsening in a Zn-4 at% Ag alloy Journal of Materials Science, 31 (9). pp. 2401-2407. ISSN 0022-2461

Manna, I. ; Jha, J. N. ; Pabi, S. K. (1995) Kinetics of discontinuous precipitation in a Zn-2.5 at % Cu alloy Journal of Materials Science, 30 (6). pp. 1449-1454. ISSN 0022-2461

Zhukov, A. A. ; Majumdar, J. Dutta ; Manna, I. (1995) Surface treatment by laser-melting induced self-propagating high temperature synthesis Journal of Materials Science Letters, 14 (11). pp. 828-829. ISSN 0261-8028

Manna, Indranil ; Pabi, S. K. (1994) Effect of surface strain on discontinuous precipitation kinetics in a Cu-7.7 at % Ag alloy Journal of Materials Science Letters, 13 (1). pp. 62-64. ISSN 0261-8028

Manna, I. ; Majumdar, J. Dutta (1993) Enhanced kinetics of diffusion coating of aluminium on copper by boundary diffusion Journal of Materials Science Letters, 12 (12). pp. 920-922. ISSN 0261-8028

Fowler, B. ; Lian, S. ; Krishnan, S. ; Jung, L. ; Li, C. ; Samara, D. ; Manna, I. ; Banerjee, S. (1992) ArF excimer laser-enhanced photochemical vapor deposition of epitaxial Si from Si2H6: a simple growth kinetic model Journal of Electronic Materials, 21 (8). pp. 791-797. ISSN 0361-5235

Manna, I. ; Pabi, S. K. ; Gust, W. (1991) Discontinous precipitation in a Cu-12 at.% in alloy Acta Metallurgica et Materialia, 39 (7). pp. 1489-1496. ISSN 0956-7151

Manna, I. ; Pabi, S. K. ; Gust, W. (1991) Initiation sites for discontinuous precipitation in some Cu-base alloys Journal of Materials Science, 26 (18). pp. 4888-4892. ISSN 0022-2461

Manna, I. ; Bader, S. ; Gust, W. ; Predel, B. (1990) Interdiffusion between in layer and bulk Cu or Cu-In alloy Physica Status Solidi A, 119 (1). K9-K13. ISSN 0031-8965

Friesel, M. ; Manna, I. ; Gust, W. (1990) Dynamic properties of grain boundaries Journal de Physique. Colloques, 51 (C1). C1_381-C1_390. ISSN 0449-1947

Manna, I. ; Pabi, S. K. (1990) Resistometric determination of the metastable solvus for discontinuous precipitation Journal of Materials Science Letters, 9 (7). pp. 854-856. ISSN 0261-8028

Manna, I. ; Pabi, S. K. (1990) A study of the nucleation characteristics of discontinuous precipitation in a pro-eutectic Cu-Ag alloy Journal of Materials Science Letters, 9 (10). pp. 1226-1228. ISSN 0261-8028

Manna, I. ; Pabi, S. K. (1988) A resistometric study of migrating boundary characteristics in Pb-Sn alloys Physica Status Solidi A, 108 (1). K19-K23. ISSN 0031-8965

Manna, I. ; Pabi, S. K. (1988) A pre-precipitation phenomenon in the Pb-Sn alloy Journal of Materials Science Letters, 7 (12). pp. 1299-1300. ISSN 0261-8028

This list was generated on Sat Jul 13 16:43:48 2024 UTC.