Browse by Fellow

Venugopal, A. ; Panda, Rajiv ; Manwatkar, Sushant ; Sreekumar, K. ; Rama Krishna, L. ; Sundararajan, G. (2012) Effect of micro arc oxidation treatment on localized corrosion behaviour of AA7075 aluminum alloy in 3.5% NaCl solution Transactions of Nonferrous Metals Society of China, 22 (3). pp. 700-710. ISSN 1003-6326

Ganesh, Ibram ; Kumar, Polkampally P. ; Gupta, Abhishek K. ; Sekhar, Panakati S. C. ; Radha, Kalathur ; Padmanabham, Gadhe ; Sundararajan, Govindan (2012) Preparation and characterization of Fe-doped TiO₂ powders for solar light response and photocatalytic applications Processing and Application of Ceramics, 6 (1). pp. 21-36. ISSN 1820-6131

Venkata Ramana, G. ; Padya, Balaji ; Srikanthb, Vadali V. S. S. ; Jain, P. K. ; Padmanabham, G. ; Sundararajan, G. (2011) Electrically conductive carbon nanopipe-graphite nanosheet/polyaniline composites Carbon, 49 (15). pp. 5239-5245. ISSN 0008-6223

Nirmala, S. ; Wasekar, N. ; Joshi, A. S. ; Sundararajan, G. (2011) A virtual instrument for pulsed electrodeposition: a novel technique for obtaining graded coatings Journal of Scientific & Industrial Research, 70 (12). pp. 1026-1028. ISSN 0022-4456

Chakravarty, D. ; Gokhale, H. ; Sundararajan, G. (2011) Optimizing mechanical properties of spark plasma sintered ZTA using neural network and genetic algorithm Materials Science and Engineering A, 529 . pp. 492-496. ISSN 0921-5093

Wasekar, Nitin P. ; Jyothirmayi, A. ; Sundararajan, G. (2011) Influence of prior corrosion on the high cycle fatigue behavior of microarc oxidation coated 6061-T6 aluminum alloy International Journal of Fatigue, 33 (9). pp. 1268-1276. ISSN 0142-1123

Ganesh, Ibram ; Reddy, Gundala Jaganatha ; Sundararajan, Govindan ; Olhero, Susana M. ; Torres, Paula M. C. ; Ferreira, José M. F. (2011) Hydrolysis-induced aqueous gelcasting of magnesium aluminate spinel International Journal of Applied Ceramic Technology, 8 (4). pp. 873-884. ISSN 1546-542X

Chavan, Naveen Manhar ; Ramakrishna, M. ; Sudharshan Phani, P. ; Srinivasa Rao, D. ; Sundararajan, G. (2011) The influence of process parameters and heat treatment on the properties of cold sprayed silver coatings Surface and Coatings Technology, 205 (20). pp. 4798-4807. ISSN 0257-8972

Suresh Babu, P. ; Basu, Bikramjit ; Sundararajan, G. (2011) The influence of erodent hardness on the erosion behavior of detonation sprayed WC-12Co coatings Wear, 270 (11-12). pp. 903-913. ISSN 0043-1648

Ganesh, Ibram ; Sundararajan, G. ; Olhero, S. M. ; Ferreira, J. M. F. (2011) Influence of chemical composition on sintering ability of ZTA ceramics consolidated from freeze dried granules Ceramics International, 37 (3). pp. 835-841. ISSN 0272-8842

Ganesh, I. ; Sundararajan, G. ; Ferreira, J. M. F. (2011) Aqueous slip casting and hydrolysis assisted solidification of MgAl₂O₄ spinel ceramics Advances in Applied Ceramics: Structural, Functional and Bioceramics, 110 (2). pp. 63-69. ISSN 1743-6753

Ganesh, I. ; Sundararajan, G. (2011) Novel route to β-SiAlON-SiO₂ ceramic composites Advances in Applied Ceramics: Structural, Functional and Bioceramics, 110 (2). pp. 87-94. ISSN 1743-6753

Venkatesh, L. ; Chavan, Naveen M. ; Sundararajan, G. (2011) The influence of powder particle velocity and microstructure on the properties of cold sprayed copper coatings Journal of Thermal Spray Technology . No pp. given. ISSN 1059-9630

Ganesh, Ibram ; Sundararajan, Govindan (2010) Hydrolysis-induced aqueous gelcasting of β-SiAlON-SiO₂ ceramic composites: the effect of AlN additive Journal of the American Ceramic Society, 93 (10). pp. 3180-3189. ISSN 0002-7820

Sundararajan, G. ; Wasekar, Nitin P. ; Ravi, N. (2010) The influence of the coating technique on the high cycle fatigue life of alumina coated Al 6061 alloy Transactions of the Indian Institute of Metals, 63 (2-3). pp. 203-208. ISSN 0972-2815

Suresh Babu, P. ; Basu, Bikramjit ; Sundararajan, G. (2010) Abrasive wear behavior of detonation sprayed WC-12Co coatings: influence of decarburization and abrasive characteristics Wear, 268 (11-12). pp. 1387-1399. ISSN 0043-1648

Ganesh, Ibram ; Sundararajan, G. ; Olhero, Susana M. ; Torres, Paula M. C. ; Ferreira, José M. F. (2010) A novel colloidal processing route to alumina ceramics Ceramics International, 36 (4). pp. 1357-1364. ISSN 0272-8842

Sivaprahasam, Duraisamy ; Sriramamurthy, A. M. ; Vijayakumar, M. ; Sundararajan, G. ; Chattopadhyay, Kamanio (2010) Synthesis of FeCu nanopowder by levitational gas condensation process Metallurgical and Materials Transactions B . ISSN 1073-5615

Chakravarty, Dibyendu ; Sundararajan, G. (2010) Effect of applied stress on IR transmission of spark plasma-sintered alumina Journal of the American Ceramic Society, 93 (4). pp. 951-953. ISSN 0002-7820

Ganesh, Ibram ; Jaganatha Reddy, G. ; Sundararajan, G. ; Olhero, Susana M. ; Torres, Paula M. C. ; Ferreira, José M. F. (2010) Influence of processing route on microstructure and mechanical properties of MgAl₂O₄ spinel Ceramics International, 36 (2). pp. 473-482. ISSN 0272-8842

Sundararajan, G. ; Sivakumar, G. ; Sen, D. ; Srinivasa Rao, D. ; Ravichandra, G. (2010) The tribological behaviour of detonation sprayed TiMo(CN) based cermet coatings International Journal of Refractory Metals and Hard Materials, 28 (1). pp. 71-81. ISSN 0263-4368

Sundararajan, G. ; Chavan, Naveen M. ; Sivakumar, G. ; Sudharshan Phani, P. (2010) Evaluation of parameters for assessment of inter-splat bond strength in cold-sprayed coatings Journal of Thermal Spray Technology, 19 (6). pp. 1255-1266. ISSN 1059-9630

Wasekar, Nitin P. ; Ravi, N. ; Suresh Babu, P. ; Rama Krishna, L. ; Sundararajan, G. (2010) High-cycle fatigue behavior of microarc oxidation coatings deposited on a 6061-T6 Al alloy Metallurgical and Materials Transactions A, 41 (1). pp. 255-265. ISSN 1073-5623

Sarada, Bulusu V. ; Pavithra, Ch. L. P. ; Ramakrishna, M. ; Rao, Tata N. ; Sundararajan, G. (2010) Highly (111) textured copper foils with high hardness and high electrical conductivity by pulse reverse electrodeposition Electrochemical and Solid-State Letters, 13 (6). D40-D42. ISSN 1099-0062

Rama Krishna, L. ; Poshal, G. ; Sundararajan, G. (2010) Influence of electrolyte chemistry on morphology and corrosion resistance of micro arc oxidation coatings deposited on magnesium Metallurgical and Materials Transactions A, 41 (13). pp. 3499-3508. ISSN 1073-5623

Sen, D. ; Chavan, Naveen M. ; Rao, D. S. ; Sundararajan, G. (2010) Influence of grit blasting on the roughness and the bond strength of detonation sprayed coating Journal of Thermal Spray Technology, 19 (4). pp. 805-815. ISSN 1059-9630

Rajasekaran, B. ; Ganesh Sundara Raman, S. ; Joshi, S. V. ; Sundararajan, G. (2009) Effect of grinding on plain fatigue and fretting fatigue behaviour of detonation gun sprayed Cu-Ni-In coating on Al-Mg-Si alloy International Journal of Fatigue, 31 (4). pp. 791-796. ISSN 0142-1123

Sundararajan, G. ; Rao, Tata Narasinga (2009) Commercial prospects for nanomaterials in India Journal of the Indian Institute of Science, 89 (1). pp. 35-41. ISSN 0970-4140

Sundararajan, G. ; Suresh Babu, P. (2009) Detonation sprayed WC-Co coatings: unique aspects of their structure and mechanical behaviour Transactions of the Indian Institute of Metals, 62 (2). pp. 95-103. ISSN 0972-2815

Sundararajan, G. ; Dikshit, S. N. (2009) The dynamic indentation behavior of steel at large depths of penetration Journal of Materials Research, 24 (03). pp. 691-703. ISSN 0884-2914

Sundararajan, G. ; Sudharshan Phani, P. ; Jyothirmayi, A. ; Gundakaram, Ravi C. (2009) The influence of heat treatment on the microstructural, mechanical and corrosion behaviour of cold sprayed SS 316L coatings Journal of Materials Science, 44 (9). pp. 2320-2326. ISSN 0022-2461

Suresh Babu, P. ; Basu, Bikramjit ; Sundararajan, G. (2008) Processing-structure-property correlation and decarburization phenomenon in detonation sprayed WC-12Co coatings Acta Materialia, 56 (18). pp. 5012-5026. ISSN 1359-6454

Ganesh, Ibram ; Thiyagarajan, Natarajan ; Jana, Dulal C. ; Mahajan, Yashwant R. ; Sundararajan, Govindan (2008) Aqueous gelcasting process for β-Si₄Al₂O₂N₆ ceramics Journal of the American Ceramic Society, 91 (9). pp. 3121-3124. ISSN 0002-7820

Ganesh, Ibram ; Sundararajan, Govindan ; Ferreira, José M. F. (2008) Formation and densification behavior of mullite aggregates from beach sand sillimanite Journal of the American Ceramic Society, 91 (8). pp. 2464-2468. ISSN 0002-7820

Rajasekaran, B. ; Ganesh Sundara Raman, S. ; Joshi, S. V. ; Sundararajan, G. (2008) Effect of microarc oxidised layer thickness on plain fatigue and fretting fatigue behaviour of Al-Mg-Si alloy International Journal of Fatigue, 30 (7). pp. 1259-1266. ISSN 0142-1123

Roy, M. ; Sundararajan, G. ; Stack, M. M. (2008) Tribo-Corrosion 2006 - a passage to India to celebrate the 1st International Conference on Tribo-Corrosion Tribology International, 41 (7). pp. 571-572. ISSN 0301-679X

Ganesh, Ibram ; Olhero, Susana M. ; Araújo, Aurora B. ; Correia, Maria R. ; Sundararajan, Govindan ; Ferreira, José M. F. (2008) Chemisorption of phosphoric acid and surface characterization of As passivated AlN powder against hydrolysis Langmuir, 24 (10). pp. 5359-5365. ISSN 0743-7463

Ganesh, I. ; Thiyagarajan, N. ; Jana, D. C. ; Barik, P. ; Sundararajan, G. (2008) An aqueous gelcasting route to dense β-Si₄Al₂O₂N₆-0.5SiO₂ ceramics Journal of the American Ceramic Society, 91 (5). pp. 1566-1571. ISSN 0002-7820

Rajasekaran, B. ; Ganesh Sundara Raman, S. ; Joshi, S. V. ; Sundararajan, G. (2008) Performance of plasma sprayed and detonation gun sprayed Cu-Ni-In coatings on Ti-6Al-4V under plain fatigue and fretting fatigue loading Materials Science and Engineering: A, 479 (1-2). pp. 83-92. ISSN 0921-5093

Rajasekaran, B. ; Ganesh Sundara Raman, S. ; Joshi, S. V. ; Sundararajan, G. (2008) Influence of detonation gun sprayed alumina coating on AA 6063 samples under cyclic loading with and without fretting Tribology International, 41 (4). pp. 315-322. ISSN 0301-679X

Chen, X. J. ; Yu, L. G. ; Khor, K. A. ; Sundararajan, G. (2008) The effect of boron-pack refreshment on the boriding of mild steel by the spark plasma sintering (SPS) process Surface and Coatings Technology, 202 (13). pp. 2830-2836. ISSN 0257-8972

Soma Raju, K. R. C. ; Faisal, Nadimul Haque ; Srinivasa Rao, D. ; Joshi, S. V. ; Sundararajan, G. (2008) Electro-spark coatings for enhanced performance of twist drills Surface and Coatings Technology, 202 (9). pp. 1636-1644. ISSN 0257-8972

Rajasekaran, B. ; Ganesh Sundara Raman, S. ; Rama Krishna, L. ; Joshi, S. V. ; Sundararajan, G. (2008) Influence of microarc oxidation and hard anodizing on plain fatigue and fretting fatigue behaviour of Al-Mg-Si alloy Surface and Coatings Technology, 202 (8). pp. 1462-1469. ISSN 0257-8972

Ganesh, Ibram ; Thiyagarajan, Natarajan ; Jana, Dulal Chandra ; Mahajan, Yashwant Ramachandra ; Sundararajan, Govindan (2008) Influence of chemical composition and Y₂O₃ on sinterability, dielectric constant, and CTE of β-SiAlON Journal of the American Ceramic Society, 91 (1). pp. 115-120. ISSN 0002-7820

Ganesh, Ibram ; Thiyagarajan, N. ; Jana, D. C. ; Barick, P. ; Sundararajan, G. ; Ferreira, J. M. F. (2008) Dense β-SiAlONs consolidated by a modified hydrolysis-assisted solidification route Journal of the European Ceramic Society, 28 (4). pp. 879-885. ISSN 0955-2219

Wasekar, Nitin P. ; Jyothirmayi, A. ; Rama Krishna, L. ; Sundararajan, G. (2008) Effect of micro arc oxidation coatings on corrosion resistance of 6061-Al alloy Journal of Materials Engineering and Performance, 17 (5). pp. 708-713. ISSN 1059-9495

Ganesh, Ibram ; Thiyagarajan, N. ; Jana, D. C. ; Sundararajan, G. ; Olhero, S. M. ; Ferreira, J. M. F. (2008) Influence of processing route and SiO₂ on sintering ability, CTE, and dielectric constant of β-Si₄Al₂O₂N₆ Journal of Materials Research, 23 (09). pp. 2305-2311. ISSN 0884-2914

Pardhasaradhi, Sudharshan Phani ; Venkatachalapathy, Vishnukanthan ; Joshi, Shrikant V. ; Govindan, Sundararajan (2008) Optical diagnostics study of gas particle transport phenomena in cold gas dynamic spraying and comparison with model predictions Journal of Thermal Spray Technology, 17 (4). pp. 551-563. ISSN 1059-9630

Ganesh, I. ; Thiyagarajan, N. ; Sundararajan, G. ; Olhero, S. M. ; Ferreira, J. M. F. (2008) A non-aqueous processing route for phosphate-protection of AlN powder against hydrolysis Journal of the European Ceramic Society, 28 (11). pp. 2281-2288. ISSN 0955-2219

Sudharshan Phani, P. ; Vishnukanthan, V. ; Sundararajan, G. (2007) Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings Acta Materialia, 55 (14). pp. 4741-4751. ISSN 1359-6454

Basu, A. ; Chakraborty, J. ; Shariff, S. M. ; Padmanabham, G. ; Joshi, S. V. ; Sundararajan, G. ; Majumdar, J. Dutta ; Manna, I. (2007) Laser surface hardening of austempered (bainitic) ball bearing steel Scripta Materialia, 56 (10). pp. 887-890. ISSN 1359-6462

Subrahmanyam, A. ; Valleti, K. ; Joshi, S. V. ; Sundararajan, G. (2007) Effect of arc suppression on the physical properties of low temperature dc magnetron sputtered tantalum thin films Journal of Vacuum Science and Technology A, A25 (2). pp. 378-382. ISSN 0734-2101

Ravi, N. ; Bukhovets, V. L. ; Varshavskaya, I. G. ; Sundararajan, G. (2007) Deposition of diamond-like carbon films on aluminium substrates by RF-PECVD technique: influence of process parameters Diamond and Related Materials, 16 (1). pp. 90-97. ISSN 0925-9635

Suresh Babu, P. ; Rao, D. S. ; Rao, G. V. N. ; Sundararajan, G. (2007) Effect of feedstock size and its distribution on the properties of detonation sprayed coatings Journal of Thermal Spray Technology, 16 (2). pp. 281-290. ISSN 1059-9630

Sudharshan Phani, P. ; Srinivasa Rao, D. ; Joshi, S. V. ; Sundararajan, G. (2007) Effect of process parameters and heat treatments on properties of cold sprayed copper coatings Journal of Thermal Spray Technology, 16 (3). pp. 425-434. ISSN 1059-9630

Ganesh Sundara Raman, S. ; Rajasekaran, B. ; Joshi, S. V. ; Sundararajan, G. (2007) Influence of substrate material on plain fatigue and fretting fatigue behavior of detonation gun sprayed Cu-Ni-In coating Journal of Thermal Spray Technology, 16 (4). pp. 571-579. ISSN 1059-9630

Rama Krishna, L. ; Sudha Purnima, A. ; Wasekar, Nitin P. ; Sundararajan, G. (2007) Kinetics and properties of micro arc oxidation coatings deposited on commercial Al alloys Metallurgical and Materials Transactions A, 38 (2). pp. 370-378. ISSN 1073-5623

Yua, L. G. ; Khor, K. A. ; Sundararajan, G. (2006) Boride layer growth kinetics during boriding of molybdenum by the Spark Plasma Sintering (SPS) technology Surface and Coatings Technology, 201 (6). pp. 2849-2853. ISSN 0257-8972

Rama Krishna, L. ; Sudha Purnima, A. ; Sundararajan, G. (2006) A comparative study of tribological behavior of microarc oxidation and hard-anodized coatings Wear, 261 (10). pp. 1095-1101. ISSN 0043-1648

Rajasekaran, B. ; Ganesh Sundara Raman, S. ; Joshi, S. V. ; Sundararajan, G. (2006) Effect of detonation gun sprayed Cu-Ni-In coating on plain fatigue and fretting fatigue behaviour of Al-Mg-Si alloy Surface and Coatings Technology, 201 (3-4). pp. 1548-1558. ISSN 0257-8972

Sundararajan, G. ; Tirupataiah, Y. (2006) The localization of plastic flow under dynamic indentation conditions: I. Experimental results Acta Materialia, 54 (3). pp. 565-575. ISSN 1359-6454

Sundararajan, G. ; Tirupataiah, Y. (2006) The localization of plastic flow under dynamic indentation conditions: II. Analysis of results Acta Materialia, 54 (3). pp. 577-586. ISSN 1359-6454

Thawari, G. ; Sarin Sundar, J. K. ; Sundararajan, G. ; Joshi, S. V. (2005) Influence of process parameters during pulsed Nd:YAG laser cutting of nickel-base superalloys Journal of Materials Processing Technology, 170 (1-2). pp. 229-239. ISSN 0924-0136

Khor, K. A. ; Yu, L. G. ; Sundararajan, G. (2005) Formation of hard tungsten boride layer by spark plasma sintering boriding Thin Solid Films, 478 (1-2). pp. 232-237. ISSN 0040-6090

Yu, L. G. ; Chen, X. J. ; Khor, K. A. ; Sundararajan, G. (2005) FeB/Fe₂B phase transformation during SPS pack-boriding: boride layer growth kinetics Acta Materialia, 53 (8). pp. 2361-2368. ISSN 1359-6454

Bandyopadhyay, S. ; Gokhale, Hina ; Sarin Sundar, J. K. ; Sundararajan, G. ; Joshi, S. V. (2005) A statistical approach to determine process parameter impact in Nd:YAG laser drilling of IN718 and Ti-6Al-4V sheets Optics and Lasers in Engineering, 43 (2). pp. 163-182. ISSN 0143-8166

Sundararajan, G. ; Sen, D. ; Sivakumar, G. (2005) The tribological behaviour of detonation sprayed coatings: the importance of coating process parameters Wear, 258 (1-4). pp. 377-391. ISSN 0043-1648

Shariff, S. M. ; Jain, Vipin ; Sundararajan, G. ; Joshi, S. V. (2005) Property enhancement of diffusion borided layers by laser treatment Journal of Laser Applications, 17 (2). pp. 100-109. ISSN 1042-346X

Joshi, S. V. ; Sundararajan, G. ; Bell, T. (2004) Surface engineering in India: on the upswing Surface Engineering, 20 (2). pp. 81-82. ISSN 0267-0844

Sundararajan, G. ; Rama Krishna, L. (2003) Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology Surface and Coatings Technology, 167 (2-3). pp. 269-277. ISSN 0257-8972

Rama Krishna, L. ; Somaraju, K. R. C. ; Sundararajan, G. (2003) The tribological performance of ultra-hard ceramic composite coatings obtained through microarc oxidation Surface and Coatings Technology, 163-164 . pp. 484-490. ISSN 0257-8972

Thawari, G. ; Sundarararjan, G. ; Joshi, S. V. (2003) Laser surface alloying of medium carbon steel with SiC_(P) Thin Solid Films, 423 (1). pp. 41-53. ISSN 0040-6090

Rama Krishna, L. ; Sen, D. ; Srinivasa Rao, D. ; Sundararajan, G. (2003) Coatability and characterization of fly ash deposited on mild steel by detonation spraying Journal of Thermal Spray Technology, 12 (1). pp. 77-79. ISSN 1059-9630

Bandyopadhyay, S. ; Sarin Sundar, J. K. ; Sundararajan, G. ; Joshi, S. V. (2002) Geometrical features and metallurgical characteristics of Nd:YAG laser drilled holes in thick IN718 and Ti-6Al-4V sheets Journal of Materials Processing Technology, 127 (1). pp. 83-95. ISSN 0924-0136

Jain, P. K. ; Mahajan, Y. R. ; Sundararajan, G. ; Okotrub, A. V. ; Yudanov, N. F. ; Romanenko, A. I. (2002) Development of carbon nanotubes and polymer composites therefrom Carbon Letters, 3 (3). pp. 142-145. ISSN 1976-4251

Yu, L. G. ; Khor, K. A. ; Sundararajan, G. (2002) Boriding of mild steel using the spark plasma sintering (SPS) technique Surface and Coatings Technology, 157 (2-3). pp. 226-230. ISSN 0257-8972

Venkataraman, B. ; Sundararajan, G. (2002) The influence of sample geometry on the friction behaviour of carbon-carbon composites Acta Materialia, 50 (5). pp. 1153-1163. ISSN 1359-6454

Jain, Vipin ; Sundararajan, G. (2002) Influence of the pack thickness of the boronizing mixture on the boriding of steel Surface and Coatings Technology, 149 (1). pp. 21-26. ISSN 0257-8972

Rama Krishna, L. ; Sen, D. ; Srinivasa Rao, Y. ; Narasimha Rao, G. V. ; Sundararajan, G. (2002) Thermal spray coating of aluminum nitride utilizing the detonation spray technique Journal of Materials Research, 17 (10). pp. 2514-2523. ISSN 0884-2914

Saravanan, P. ; Selvarajan, V. ; Joshi, S. V. ; Sundararajan, G. (2001) Experimental design and performance analysis of alumina coatings deposited by a detonation spray process Journal of Physics D: Applied Physics, 34 (1). pp. 131-140. ISSN 0022-3727

Roy, Manish ; Ray, K. K. ; Sundararajan, G. (2001) Erosion-oxidation interaction in Ni and Ni-20Cr alloy Metallurgical and Materials Transactions A, 32 (6). pp. 1431-1451. ISSN 1073-5623

Venkataraman, B. ; Sundararajan, G. (2000) Correlation between the characteristics of the mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al-MMCs Wear, 245 (1-2). pp. 22-38. ISSN 0043-1648

Saravanan, P. ; Selvarajan, V. ; Srivastava, M. P. ; Joshi, S. V. ; Sundararajan, G. (2000) Influence of spraying variables on structure and properties of plasma sprayed alumina coatings British Ceramic Transactions, 99 (6). pp. 241-247. ISSN 0967-9782

Saravanan, P. ; Selvarajan, V. ; Rao, D. S. ; Joshi, S. V. ; Sundararajan, G. (2000) Influence of process variables on the quality of detonation gun sprayed alumina coatings Surface and Coatings Technology, 123 (1). pp. 44-54. ISSN 0257-8972

Saravanan, P. ; Selvarajan, V. ; Srinivasa Rao, D. ; Joshi, S. V. ; Sundararajan, G. (2000) Application of Taguchi method to the optimization of detonation spraying process Materials and Manufacturing Processes, 15 (1). pp. 139-153. ISSN 1042-6914

Saravanan, P. ; Selvarajan, V. ; Srivastava, M. P. ; Rao, D. S. ; Joshi, S. V. ; Sundararajan, G. (2000) Study of plasma- and detonation gun-sprayed alumina coatings using Taguchi experimental design Journal of Thermal Spray Technology, 9 (4). pp. 505-512. ISSN 1059-9630

Roy, M. ; Rao, C. V. S. ; Rao, D. S. ; Sundararajan, G. (1999) Abrasive wear behaviour of detonation sprayed WC-Co coatings on mild steel Surface Engineering, 15 (2). pp. 129-136. ISSN 0267-0844

Shariff, S. M. ; Sundararajan, G. ; Joshi, S. V. (1999) Parametric influence on cut quality attributes and generation of processing maps for laser cutting Journal of Laser Applications, 11 (2). pp. 54-63. ISSN 1042-346X

Roy, Manish ; Ray, K. K. ; Sundararajan, G. (1999) The influence of erosion-induced roughness on the oxidation kinetics of Ni and Ni-20Cr alloys Oxidation of Metals, 51 (3-4). pp. 251-272. ISSN 0030-770X

Roy, Manish ; Ray, K. K. ; Sundararajan, G. (1998) An analysis of the transition from metal erosion to oxide erosion Wear, 217 (2). pp. 312-320. ISSN 0043-1648

Sundararajan, G. ; Prasad, K. U. M. ; Rao, D. S. ; Joshi, S. V. (1998) A comparative study of tribological behavior of plasma and D-gun sprayed coatings under different wear modes Journal of Materials Engineering and Performance, 7 (3). pp. 343-351. ISSN 1059-9495

Sundararajan, G. ; Roy, Manish (1997) Solid particle erosion behaviour of metallic materials at room and elevated temperatures Tribology International, 30 (5). pp. 339-359. ISSN 0301-679X

Sundararajan, G. ; Roy, Manish ; Das, D. K. (1997) Tribological behaviour of ion deposited ZrN coatings on mild steel substrate Surface Engineering, 13 . pp. 219-222. ISSN 0267-0844

Das, D. K. ; Roy, Manish ; Singh, A. K. ; Sundararajan, G. (1996) Microstructural characterisation of alloyed surface layers of an Al-Si alloy laser alloyed with nickel and titanium Materials Science and Technology, 12 (4). pp. 295-305. ISSN 0267-0836

Venkataraman, B. ; Sundararajan, G. (1996) The sliding wear behaviour of Al---SiC particulate composites- II. The characterization of subsurface deformation and correlation with wear behaviour Acta Materialia, 44 (2). pp. 461-473. ISSN 1359-6454

Venkataraman, B. ; Sundararajan, G. (1996) The sliding wear behaviour of Al---SiC particulate composites-I. Macrobehaviour Acta Materialia, 44 (2). pp. 451-460. ISSN 1359-6454

Roy, Manish ; Tirupataiah, Y. ; Sundararajan, G. (1995) Influence of solid solution and dispersion strengthening mechanism room temperature erosion behaviour of nickel Materials Science and Technology, 11 (8). pp. 791-797. ISSN 0267-0836

Venkataraman, B. ; Sundararajan, G. (1995) The high speed sliding wear behaviour of boronized medium carbon steel Surface and Coatings Technology, 73 (3). pp. 177-184. ISSN 0257-8972

Sundararajan, G. (1995) The solid particle erosion of metallic materials: the rationalization of the influence of material variables Wear, 186-187 (1). pp. 129-144. ISSN 0043-1648

Dikshit, S. N. ; Kutumbarao, V. V. ; Sundararajan, G. (1995) The influence of plate hardness on the ballistic penetration of thick steel plates International Journal of Impact Engineering, 16 (2). pp. 293-320. ISSN 0734-743X

Joshi, S. V. ; Srivastava, M. P. ; Sundararajan, G. (1995) Evidence of accelerated thermal cycling test schedules influencing the ranking of zirconia-base thermal barrier coatings Journal of Thermal Spray Technology, 4 (3). pp. 275-279. ISSN 1059-9630

Tirupataiah, Y. ; Sundararajan, G. (1994) The strain-rate sensitivitity of flow stress and strain-hardening rate in metallic materials Materials Science and Engineering: A, 189 (1-2). pp. 117-127. ISSN 0921-5093

Sundararajan, G. (1994) Tribology research at the defence metallurgical research laboratory, Hyderabad, India Tribology International, 27 (6). pp. 433-442. ISSN 0301-679X

Srinivas, M. ; Sundararajan, G. ; Malakondaiah, G. ; Rama Rao, P. (1994) An analysis of ductile fracture initiation toughness in iron, its binary alloys and nickel Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences, 447 (1930). pp. 237-251. ISSN 1364-5021

Roy, Manish ; Vishwanathan, B. ; Sundararajan, G. (1994) The solid particle erosion of polymer matrix composites Wear, 171 (1-2). pp. 149-161. ISSN 0043-1648

Sundararajan, G. ; Tirupataiah, Y. (1994) The hardness-flow stress correlation in metallic materials Bulletin of Materials Science, 17 (6). pp. 747-770. ISSN 0250-4707

Rao, D. R. K. ; Venkataraman, B. ; Asundi, M. K. ; Sundararajan, G. (1993) The effect of laser surface melting on the erosion behaviour of a low alloy steel Surface and Coatings Technology, 58 (2). pp. 85-92. ISSN 0257-8972

Roy, Manish ; Tirupataiah, Y. ; Sundararajan, G. (1993) Effect of particle shape on the erosion of Cu and its alloys Materials Science and Engineering: A, 165 (1). pp. 51-63. ISSN 0921-5093

Sundararajan, G. (1993) The differential effect of the hardness of metallic materials on their erosion and abrasion resistance Wear, 162-164 (2). pp. 773-781. ISSN 0043-1648

Rao, D. R. K. ; Venkataraman, B. ; Asundi, M. K. ; Sundararajan, Govindan (1992) The erosion behaviour of an aluminium-lithium alloy Scripta Metallurgica et Materialia, 27 (7). pp. 937-942. ISSN 0956-716X

Rama Rao, P. ; Kamat, S. V. ; Sundararajan, G. (1992) Material deformation and fracture under impulsive loading conditions Bulletin of Materials Science, 15 (1). pp. 3-25. ISSN 0250-4707

Roy, Manish ; Subramaniyam, M. ; Sundararajan, G. (1992) Room temperature erosion behaviour of a precipitation hardened stainless steel Tribology International, 25 (4). pp. 271-280. ISSN 0301-679X

Roy, Manish ; Venkataraman, B. ; Bhanuprasad, V. V. ; Mahajan, Y. R. ; Sundararajan, G. (1992) The effect of participate reinforcement on the sliding wear behavior of aluminum matrix composites Metallurgical and Materials Transactions A, 23 (10). pp. 2833-2847. ISSN 1073-5623

Dikshit, S. N. ; Sundararajan, G. (1992) The penetration of thick steel plates by ogive shaped projectiles- experiment and analysis International Journal of Impact Engineering, 12 (3). pp. 373-408. ISSN 0734-743X

Sundararajan, G. (1991) A comprehensive model for the solid particle erosion of ductile materials Wear, 149 (1-2). pp. 111-127. ISSN 0043-1648

Sundararajan, G. (1991) The depth of plastic deformation beneath eroded surfaces: the influence of impact angle and velocity, particle shape and material properties Wear, 149 (1-2). pp. 129-153. ISSN 0043-1648

Sundararajan, G. (1991) An analysis of the erosion-oxidation interaction mechanisms Wear, 145 (2). pp. 251-282. ISSN 0043-1648

Balan, K. P. ; Venugopal Reddy, A. ; Joshi, Vydehi ; Sundararajan, G. (1991) The influence of microstructure on the erosion behaviour of cast irons Wear, 145 (2). pp. 283-296. ISSN 0043-1648

Singh, Trilok ; Tiwari, S. N. ; Sundararajan, G. (1991) Room temperature erosion behaviour of 304, 316 and 410 stainless steels Wear, 145 (1). pp. 77-100. ISSN 0043-1648

Tirupataiah, Y. ; Sundararajan, G. (1991) On the constraint factor associated with the indentation of work-hardening materials with a spherical ball Metallurgical and Materials Transactions A, 22 (10). pp. 2375-2384. ISSN 1073-5623

Tirupataiah, Y. ; Sundararajan, G. (1991) A dynamic indentation technique for the characterization of the high strain rate plastic flow behaviour of ductile metals and alloys Journal of the Mechanics and Physics of Solids, 39 (2). pp. 243-271. ISSN 0022-5096

Venugopal Reddy, A. ; Sundararajan, G. (1991) The influence of grain size on the erosion rate of metals Metallurgical and Materials Transactions A, 22 (1). pp. 1043-1052. ISSN 1073-5623

Sundararajan, G. ; Roy, M. ; Venkataraman, B. (1990) Erosion efficiency-a new parameter to characterize the dominant erosion micromechanism Wear, 140 (2). pp. 369-381. ISSN 0043-1648

Tirupataiah, Y. ; Venkataraman, B. ; Sundararajan, G. (1990) The nature of the elastic rebound of a hard ball impacting on ductile, metallic target materials Materials Science and Engineering: A, 124 (2). pp. 133-140. ISSN 0921-5093

Sagar, P. K. ; Sundararajan, G. ; Bhatia, M. L. (1990) On the anomalous flow behaviour of nickel aluminide Scripta Metallurgica et Materialia, 24 (2). pp. 257-262. ISSN 0956-716X

Sundararajan, G. (1990) The energy absorbed during the oblique impact of a hard ball against ductile target materials International Journal of Impact Engineering, 9 (3). pp. 343-358. ISSN 0734-743X

Singh, Trilok ; Sundararajan, G. (1990) The erosion behavior of 304 stainless steel at elevated temperatures Metallurgical and Materials Transactions A, 21 (12). pp. 3187-3199. ISSN 1073-5623

Tirupataiah, Y. ; Sundararajan, G. (1990) The volume of the crater formed by the impact of a ball against flat target materials- the effect of ball hardness and density International Journal of Impact Engineering, 9 (2). pp. 237-246. ISSN 0734-743X

Venkataraman, B. ; Sundararajan, G. (1989) The solid particle erosion of copper at very low impact velocities Wear, 135 (1). pp. 95-108. ISSN 0043-1648

Sundararajan, G. (1989) The Monkman-Grant relationship Materials Science and Engineering: A, 112 . pp. 205-214. ISSN 0921-5093

Malakondaiah, G. ; Prasad, N. ; Sundararajan, G. ; Rama Rao, P. (1988) An analysis of the transient stage in low stress viscous creep Acta Metallurgica, 36 (8). pp. 2167-2181. ISSN 0001-6160

Venkataraman, B. ; Sundararajan, G. (1987) The effect of matrix constraint on intergranular cavity growth mechanism maps Materials Science and Engineering, 92 . pp. 113-126. ISSN 0025-5416

Tirupataiah, Y. ; Sundararajan, G. (1987) A comprehensive analysis of the static indentation process Materials Science and Engineering, 91 . pp. 169-180. ISSN 0025-5416

Sundararajan, G. (1987) A new model for two-body abrasive wear based on the localization of plastic deformation Wear, 117 (1). pp. 1-35. ISSN 0043-1648

Sundararajan, G. ; Shewmon, P. G. (1987) The oblique impact of a hard ball against ductile, semi-infinite target materials- experiment and analysis International Journal of Impact Engineering, 6 (1). pp. 3-22. ISSN 0734-743X

Venugopal Reddy, A. ; Sundararajan, G. (1986) Erosion behaviour of ductile materials with a spherical non-friable erodent Wear, 111 (3). pp. 313-323. ISSN 0043-1648

Tirupataiah, Y. ; Sundararajan, G. (1986) Evaluation of microhardness correction procedures Wear, 110 (2). pp. 183-202. ISSN 0043-1648

Sundararajan, G. (1985) Continuous cavity nucleation and creep ductility Scripta Metallurgica, 19 (10). pp. 1141-1146. ISSN 0036-9748

Sundarajan, G. (1985) The effect of cavitation and microstructural damage on the intergranular creep fracture of nickel-base superalloys Materials Science and Engineering, 74 (1). pp. 55-73. ISSN 0025-5416

Venugopal Reddy, A. ; Sundararajan, G. (1985) The effect of stacking fault energy on the erosion behaviour of copper alloys at oblique impact Wear, 103 (2). pp. 133-148. ISSN 0043-1648

Sundararajan, G. (1985) On the correlation of erosion and wear resistance of pure metals with their mechanical and thermophysical properties Scripta Metallurgica, 19 (3). pp. 347-352. ISSN 0036-9748

Sundararajan, G. (1984) The effect of temperature on solid particle erosion Wear, 98 . pp. 141-149. ISSN 0043-1648

Venugopal Reddy, A. ; Sundararajan, G. ; Sivakumar, R. ; Rama Rao, P. (1984) Correlation between erosion behaviour and stacking fault energy in copper alloys Acta Metallurgica, 32 (9). pp. 1305-1316. ISSN 0001-6160

Sundararajan, G. (1984) An empirical relation for the volume of the crater formed during high velocity oblique impact tests Wear, 97 (1). pp. 9-16. ISSN 0043-1648

Shewmon, P. ; Sundararajan, G. (1983) The erosion of metals Annual Review of Materials Science, 13 . pp. 301-318. ISSN 0084-6600

Sundararajan, G. (1983) An analysis of the localization of deformation and weight loss during single-particle normal impact Wear, 84 (2). pp. 217-235. ISSN 0043-1648

Sundararajan, G. ; Shewmon, P. G. (1983) A new model for the erosion of metals at normal incidence Wear, 84 (2). pp. 237-258. ISSN 0043-1648

Sundararajan, G. ; Shewmon, P. G. (1983) The use of dynamic impact experiments in the determination of the strain rate sensitivity of metals and alloys Acta Metallurgica, 31 (1). pp. 101-109. ISSN 0001-6160

Sundararajan , G. (1982) The saturation of flow stress in FCC metals Scripta Metallurgica, 16 (5). pp. 611-614. ISSN 0036-9748

Sundararajan, G. ; Shewmon, Paul G. (1981) The kinetics of hydrogen attack of steels Metallurgical and Materials Transactions A, 12 (10). pp. 1761-1775. ISSN 1073-5623

Sundararajan, G. ; Shewmon, P. G. (1980) The hydrogen attack of HSLA steels Metallurgical and Materials Transactions A, 11 (3). pp. 509-516. ISSN 1073-5623