Browse by Fellow

Ramamurti, V. ; Mithun, S. ; Prabhakar, N. ; Sukumar, T. (2012) Experimental determination of damping ratios at higher modes for use in modal superposition Journal of Engineering and Technology Research, 4 (6). pp. 114-128. ISSN 2006-9790

Mohan, K. M. ; Srinivasan, K. ; Ramamurti, V. (2010) Dynamics of machine tool drive housings Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 224 (11). pp. 1619-1630. ISSN 0954-4054

Ramamurti, V. ; Malar Mohan, K. ; Srinivasan, K. (2010) Dynamic analysis of housings of process plants Proceedings of the Indian National Science Academy - Part A: Physical Sciences, 76 (4). pp. 171-188. ISSN 0370-0046

Ramamurti, V. ; Chandana, E. ; et., al (2009) Shortcomings in field balancing Proceedings of the Indian National Science Academy - Part A: Physical Sciences, 75 (3). pp. 113-117. ISSN 0370-0046

Gangadharan, K. V. ; Sujatha, C. ; Ramamurti, V. (2008) Dynamic response of railroad vehicles: a frequency domain approach International Journal of Heavy Vehicle Systems, 15 (1). pp. 65-81. ISSN 1744-232X

Ramamurti, V. ; Mohan, Malar ; Jaya Durga, G. (2007) Design guidance for cordon shaft of twin drives in cement mills Zement Kalk Gips, 60 (2). pp. 37-47. ISSN 0341-0560

Gangadharan, K. V. ; Sujatha, C. ; Ramamurti, V. (2007) Dynamic response of railroad vehicle to rail joints and average vertical profile: a time domain approach International Journal of Heavy Vehicle Systems, 14 (4). pp. 402-420. ISSN 1744-232X

Vaidyanathan, Ramnath ; Santhanam, Shriram ; Ramamurti, V. (2003) Static and dynamic analysis of an aerofoil bladed disc using the concept of cyclic symmetry Communications in Numerical Methods in Engineering, 19 (4). pp. 313-324. ISSN 1069-8299

Bansal, A. K. ; Kenneth, C. G. ; Ujjwala, D. ; Ramamurti, V. (2003) User-friendly programme for the analysis of industrial clarifiers Advances in Engineering Software, 34 (1). pp. 51-58. ISSN 0965-9978

Mariappan, D. D. ; Vijay, S. ; Ramamurti, V. (2003) An efficient algorithm for solving spoked wheels Advances in Engineering Software, 34 (1). pp. 25-30. ISSN 0965-9978

Ramamurti, V. ; Rajarajan, S. ; Venkateswara Rao, G. (2002) An incremental approach for large displacement response of structures subjected to dynamic loads Finite Elements in Analysis and Design, 38 (9). pp. 823-833. ISSN 0168-874X

Ramamurti, V. ; Rajarajan, S. ; Rao, G. V. (2001) Geometric nonlinear effect of a typical CFRP payload fairing on dynamic displacement response Journal of Sound and Vibration, 245 (3). pp. 562-570. ISSN 0022-460X

Saravanan, C. ; Ganesan, N. ; Ramamurti, V. (2001) Semianalytical finite element analysis of active constrained layer damping in cylindrical shells of revolution Computers & Structures, 79 (11). pp. 1131-1145. ISSN 0045-7949

Balaji, K. ; Sriram, K. ; Ramamurti, V. (2000) Development of user-friendly programs for static and dynamic analysis of radial impellers Advances in Engineering Software, 31 (10). pp. 775-791. ISSN 0965-9978

Ramamurti, V. ; Rajaran, S. ; Rao, G. V. (2000) Boat tail effect of a pay load fairing on the elastic dislacement response Journal of Spacecraft and Rockets, 37 (5). pp. 703-706. ISSN 0022-4650

Saravanan, C. ; Ganesan, N. ; Ramamurti, V. (2000) Semianalytical finite element analysis of active damping in smart cylindrical shells Journal of Vibration and Control, 6 (6). pp. 849-873. ISSN 1077-5463

Saravanan, C. ; Ganesan, N. ; Ramamurti, V. (2000) Study on energy dissipation pattern in vibrating fluid filled cylindrical shells with a constrained viscoelastic layer Computers & Structures, 75 (6). pp. 575-591. ISSN 0045-7949

Saravanan, C. ; Ganesan, N. ; Ramamurti, V. (2000) Vibration and damping analysis of multilayered fluid filled cylindrical shells with constrained viscoelastic damping using modal strain energy method Computers & Structures, 75 (4). pp. 395-417. ISSN 0045-7949

Saravanan, C. ; Ganesan, N. ; Ramamurti, V. (2000) Analysis of active damping in composite laminate cylindrical shells of revolution with skewed PVDF sensors/actuators Composite Structures, 48 (4). pp. 305-318. ISSN 0263-8223

Ramamurti, V. ; Rajarajan, S. ; Rao, G. V. (2000) Effect of cylinder height of a typical payload fairing on the displacement response due to separation force Communications in Numerical Methods in Engineering, 16 (1). pp. 21-35. ISSN 1069-8299

Ramamurti, V. ; Rajarajan, S. ; Rao, G. V. (1999) Elastic response of a typical CFRP payload fairing due to separation impulse Composite Structures, 45 (2). pp. 147-154. ISSN 0263-8223

Hanumantha Rao, M. ; Ramamurti, V. ; Swarnamani, S. (1999) Modal analysis and model updating studies on a three-wheeler auto Journal of Vibration and Control, 5 (2). pp. 253-276. ISSN 1077-5463

Saravanan, C. ; Ganesan, N. ; Ramamurti, V. (1998) Study of the effect of in-plane and interlaminar stresses on damping in fluid-filled laminated composite cylinders Composite Structures, 43 (4). pp. 301-320. ISSN 0263-8223

Ramamurti, V. ; Rajaram, Harish ; Balasubramaniam, Mahadevan (1998) Dynamic analysis of two types of over-crank guillotine shears-a comparative study Journal of Materials Processing Technology, 83 (1-3). pp. 54-61. ISSN 0924-0136

Ramamurti, V. ; Vijayendra, Nayak H. ; Sujatha, C. (1998) Static and dynamic analysis of spur and bevel gears using FEM Mechanism and Machine Theory, 33 (8). pp. 1177-1193. ISSN 0094-114X

Ramamurti, V. ; Rao, M. H. (1998) Studies on model updating using different finite elements Journal of Sound and Vibration, 211 (3). pp. 507-512. ISSN 0022-460X

Ramamurti, V. ; Neogy, Sumanta (1998) Effect of cracks on the natural frequency of cantilevered plates-a Rayleigh-Ritz solution Mechanics of Structures and Machines, 26 (2). pp. 131-143. ISSN 0890-5452

Ramamurti, V. ; Sasikiran, S. ; Kumar, P. Vinod (1997) Dynamic analysis of a guillotine shearing machine Journal of Materials Processing Technology, 71 (2). pp. 202-214. ISSN 0924-0136

Laxmiprasad, P. ; Nandakumar, R. ; Ramamurti, V. (1997) Comparison of methods for free-vibration analysis of large cyclic symmetric problems Communications in Numerical Methods in Engineering, 13 (11). pp. 835-854. ISSN 1069-8299

Neogy, S. ; Ramamurti, V. (1997) Effect of partial depth cracks on the natural frequency of twisted blades: a 3-d finite element analysis Journal of Sound and Vibration, 205 (1). pp. 33-55. ISSN 0022-460X

Laxmi Prasad, P. ; Nandakumar, R. ; Ramamurti, V. (1997) Estimation of machining errors using the concept of cyclic symmetry International Journal of Machine Tools and Manufacture, 37 (5). pp. 635-647. ISSN 0890-6955

Ramamurti, V. ; Karthikeyan, R. (1997) Stress analysis of taper locks Computers & Structures, 62 (4). pp. 721-736. ISSN 0045-7949

Subramani, D. A. ; Ramamurti, V. ; Sridhara, K. (1997) Numerical analysis and experimental verification of the radial growth of a turbocharger centrifugal compressor impeller The Journal of Strain Analysis for Engineering Design, 32 (2). pp. 119-128. ISSN 0309-3247

Ramamurti, V. ; Gautam, P. ; Kothari, A. (1997) Computer-aided design of a two-stage gearbox Advances in Engineering Software, 28 (1). pp. 73-82. ISSN 0965-9978

Ramamurti, V. ; Neogy, Sumanta (1997) Dynamic behaviour of cracked structures and machines Proceedings of the Indian National Science Academy - Part A: Physical Sciences, 63 (4). pp. 287-3314. ISSN 0370-0046

Bhat, M. M. ; Ramamurti, V. ; Sujatha, C. (1996) Studies on the determination of natural frequencies of industrial turbine blades Journal of Sound and Vibration, 196 (5). pp. 681-703. ISSN 0022-460X

Ramamurti, V. ; Gowri, S. (1996) Design considerations of over-crank and under-crank guillotine shears: a comparative study Journal of Materials Processing Technology, 57 (3-4). pp. 225-232. ISSN 0924-0136

Ramamurti, V. (1996) Design aspects of heavy duty moulding boxes Journal of Institution of Engineering, 76 . pp. 225-228.

Ramamurti, V. (1996) Dynamic response of transmission housings The Shock and Vibration Digest, 28 (4). pp. 15-18. ISSN 0583-1024

Mohammad, D. R. A. ; Khan, N. U. ; Ramamurti, V. (1995) On the role of Rayleigh damping Journal of Sound and Vibration, 185 (2). pp. 207-218. ISSN 0022-460X

Ramamurti, V. ; Subramani, D. A. ; Sridhara, K. (1995) Free vibration analysis of a turbocharger centrifugal compressor impeller Mechanism and Machine Theory, 30 (4). pp. 619-628. ISSN 0094-114X

Ramamurti, V. (1995) Comparison of semi analytic and cyclic symmetric approaches Computers & Structures, 54 (6). pp. 1105-1111. ISSN 0045-7949

Siva Prasad, N. ; Sashikanth, P. ; Ramamurti, V. (1994) Stress distribution in interference joints Computers & Structures, 51 (5). pp. 535-540. ISSN 0045-7949

Balasubramanian, P. ; Jagadeesh, J. G. ; Suhas, H. K. ; Ramamurti, V. (1994) Modal methods for the analysis of cyclic symmetric structures Computers & Structures, 50 (1). pp. 67-77. ISSN 0045-7949

Ramamurti, V. ; Sreeram, P. N. ; Kannan, B. K. (1994) Design aspects and detailed study of medium tonnage mechanical press brakes Journal of Materials Processing Technology, 40 (1-2). pp. 99-110. ISSN 0924-0136

Ramamurti, V. ; Kankipati, P. ; Veeraraghavan, B. (1993) Stress analysis of cement mills Computers & Structures, 48 (3). pp. 541-546. ISSN 0045-7949

Balasubramanian, P. ; Jagadeesh, J. G. ; Suhas, H. K. ; Srivastava, A. K. ; Ramamurti, V. (1993) On the use of the Ritz-Wilson method for the dynamic response analysis of cyclic symmetric structures Journal of Sound and Vibration, 164 (2). pp. 193-206. ISSN 0022-460X

Balasubramanian, P. ; Jagadeesh, J. G. ; Suhas, H. K. ; Ramamurti, V. (1993) Application of block Lanczos method for analysis of cyclic symmetric structures International Journal for Numerical Methods in Engineering, 36 (2). pp. 273-285. ISSN 0029-5981

Balasubramanian, P. ; Jagadeesh, J. G. ; Suhas, H. K. ; Ramamurti, V. (1993) Some studies on free vibration analysis of cyclic symmetric structures using subspace method Engineering Computations, 10 (3). pp. 279-286. ISSN 0264-4401

Ramamurti, V. ; Sujatha, C. (1992) Predictions on the dynamic stresses on practical cement mills using cyclic symmetry Computers & Structures, 45 (5-6). pp. 1103-1108. ISSN 0045-7949

Ramamurti, V. ; Ravi Shankar Rao, V. ; Sriram, N. S. (1992) Design aspects and parametric study of 3-roll heavy-duty plate-bending machines Journal of Materials Processing Technology, 32 (3). pp. 585-598. ISSN 0924-0136

Omprakash, V. ; Ramamurti, V. (1992) A cyclic symmetry approach to the structural dynamic analysis of bladed discs Communications in Applied Numerical Methods, 8 (2). pp. 81-91. ISSN 0748-8025

Ramamurti, V. ; Panwalkar, A. S. ; Rajamani, A. (1992) Dynamic analysis of practical bladed discs using FEM and Cyclic symmetry technique Proceedings of Second International Conference on Structure-borne Noise and Vibration, 2 . pp. 1061-1070.

Seshu, P. ; Ramamurti, V. ; Babu, B. J. C. (1992) Theoretical and experimental investigations on composite blades Composite Structures, 20 (2). pp. 63-71. ISSN 0263-8223

Balasubramanian, P. ; Jagadeesh, J. G. ; Suhas, H. K. ; Ramamurti, V. (1991) Free-vibration analysis of cyclic symmetric structures Communications in Applied Numerical Methods, 7 (2). pp. 131-139. ISSN 0748-8025

Ramamurti, V. ; Sujatha, C. ; Irretier, H. (1991) Dynamic strain measurement on a model of a cement kiln Zement Kalk Gips, 44 (3). pp. 123-126. ISSN 0341-0560

Ramamurti, V. ; Suresh, S. ; Raghuraman, B. ; Ravichandran, G. (1991) Residual stress analysis in weldments Engineering Fracture Mechanics, 38 (6). pp. 385-391. ISSN 0013-7944

Balasubramanian, P. ; Suhas, H. K. ; Ramamurti, V. (1991) Skyline solver for the static analysis of cyclic symmetric structures Computers & Structures, 38 (3). pp. 259-268. ISSN 0045-7949

Suresh, J. K. ; Venkatesan, C. ; Ramamurti, V. (1990) Structural dynamic analysis of composite beams Journal of Sound and Vibration, 143 (3). pp. 503-519. ISSN 0022-460X

Omprakash, V. ; Ramamurti, V. (1990) Coupled free vibration characteristics of rotating tuned bladed disk systems Journal of Sound and Vibration, 140 (3). pp. 413-435. ISSN 0022-460X

Ramamurti, V. ; Seshu, P. (1990) On the principle of cyclic symmetry in machine dynamics Communications in Numerical Methods in Engineering, 6 (4). pp. 259-268. ISSN 1069-8299

Karuppaiah, N. ; Sujatha, C. ; Ramamurti, V. (1990) Modal vibration/stress analysis of a passenger vehicle by FEM SAE Technical Papers . No pp. given.

Sujatha, C. ; Ramamurti, V. (1990) Bus vibrations study-experimental response to road undulations International Journal of Vehicle Design, 11 (4-5). pp. 390-400. ISSN 1477-5360

Ramamurti, V. ; Sujatha, C. (1990) Bus vibrations study-finite element modelling and determination of Eigen pairs International Journal of Vehicle Design, 11 (4-5). pp. 410-420. ISSN 1477-5360

Ramamurti, V. ; Sujatha, C. (1990) Bus vibrations study-theoretical response analysis and expoerimental verification International Journal of Vehicle Design, 11 (4-5). pp. 401-409. ISSN 1477-5360

Mangsuli, D. G. ; Ramamurti, V. (1990) Lanczos method applied to the solution of eigenvalue problems of cyclic symmetric structures Computers & Structures, 34 (2). pp. 349-353. ISSN 0045-7949

Ramamurti, V. ; ArulKumar, P. S. ; Jayaraman, K. (1990) Performance comparison of cast and fabricated gearbox casings Computers & Structures, 37 (3). pp. 353-359. ISSN 0045-7949

Omprakash, V. ; Ramamurti, V. (1990) Spectral analysis of the transient characteristics of a bladed disk during run-up Computers & Structures, 37 (6). pp. 983-992. ISSN 0045-7949

Ramamurti, V. ; Anantaraman, K. V. (1989) Two-plane in-situ balancing Journal of Sound and Vibration, 134 (2). pp. 343-352. ISSN 0022-460X

Seshu, P. ; Ramamurti, V. (1989) Effect of fictitious rotational stiffness coefficient on natural frequencies Journal of Sound and Vibration, 133 (1). pp. 177-179. ISSN 0022-460X

Nagesh, K. ; Srikant, A. ; Ramamurti, V. (1989) Automatic mesh generation in 2-D and 3-D objects Advances in Engineering Software(1978), 11 (1). pp. 19-25. ISSN 0141-1195

Ramamurti, V. ; Seshu, P. (1989) Comparative performance of isotropic and composite bladed disks Proceedinds of 15th Design Automation Conference, DE 19-3 . pp. 187-194.

Ramamurti, V. ; Murugan, S. ; Shankar, B. (1989) Cyclic symmetric analysis of fabricated gear wheels Proceedinds of 15th Design Conference, DE 19-3 . pp. 253-258.

Ramamurti, V. ; Sujatha, C. ; Swarnamani, S. (1989) Design aspects of continuous sugar centrifugals - a critical study Indian Sugar, 91 . pp. 124-129. ISSN 0019-6428

Ramamurti, V. ; Murugan, S. ; Shanker, B. (1989) Design parameters of fabricated girth gears TIZ (Tonindustrie-Zeitung), 13 (9). pp. 739-742. ISSN 0722-9488

Ramamurti, V. ; Srinivasan, H. ; Sekhar, R. ; Sekar, S. ; Sivakumar, S. (1989) Dynamic analysis of heavy duty wheels Computers & Structures, 31 (2). pp. 275-285. ISSN 0045-7949

Ramamurti, V. ; Narayanan, N. C. (1989) Dynamic stress analysis of roller clutch sleeve Computers & Structures, 33 (2). pp. 403-410. ISSN 0045-7949

Omprakash, V. ; Ramamurti, V. (1989) Dynamic stress analysis of rotating turbo-machinery bladed-disk systems Computers & Structures, 32 (2). pp. 477-488. ISSN 0045-7949

Ramamurti, V. ; Seshu, P. (1989) Vibration of twisted composite plates Journal of the Aeronautical Society of India, 41 (1). pp. 65-70. ISSN 0001-9267

Ramamurti, V. ; Sujatha, C. (1989) Vibration response of buses Proceedings of the Fourth International Conference on CAD, CAM, Robotics and Factories of the Future, 1 . pp. 334-346.

Omprakash, V. ; Ramamurti, V. (1988) Natural frequencies of bladed disks by a combined cyclic symmetry and Rayleigh-Ritz method Journal of Sound and Vibration, 125 (2). pp. 357-366. ISSN 0022-460X

Srinath, L. S. ; Ramesh, K. ; Ramamurti, V. (1988) Determination of characteristic parameters in three-dimensional photoelasticity Optical Engineering, 27 . pp. 225-230. ISSN 0091-3286

Ramamurti, V. ; Seshu, P. (1988) Dynamic analysis of a pressure vessel Computers & Structures, 29 (1). pp. 161-170. ISSN 0045-7949

Ramamurti, V. ; Ananda Rao, M. (1988) Dynamic analysis of spur gear teeth Computers & Structures, 29 (5). pp. 831-843. ISSN 0045-7949

Ramamurti, V. ; Pradeep Simha, A. R. (1987) Finite element calculation of critical speeds of rotation of shafts with gyroscopic action of discs Journal of Sound and Vibration, 117 (3). pp. 578-582. ISSN 0022-460X

Balasubramanian, P. ; Ramamurti, V. (1987) Frequency analysis of centrifugal fan impellers Journal of Sound and Vibration, 116 (1). pp. 1-13. ISSN 0022-460X

Vombatkere, S. G. ; Radhakrishnan, R. ; Ramamurti, V. (1987) Lowest bending and torsional frequencies of a prismatic guyed mast carrying a mass at its top Journal of Sound and Vibration, 112 (3). pp. 550-555. ISSN 0022-460X

Omprakash, V. ; Ramamurti, V. (1987) Analytical and experimental investigation of practical radial fan impellers Proceedings of 20th Mechanics Mid-Western Conference, 14(b) . pp. 889-893.

Ramamurti, V. ; Balasubramanian, P. (1987) Steady state stress analysis of centrifugal fan impellers Computers & Structures, 25 (1). pp. 129-135. ISSN 0045-7949

Balasubramanian, P. ; Ramamurti, V. (1987) An equation solver for eigenvalue problems of cyclic symmetric structures Computers & Structures, 26 (4). pp. 667-672. ISSN 0045-7949

Ramamurti, V. ; Balasubramanian, P. (1986) Static analysis of circumferentially periodic structures with Potters' scheme Computers & Structures, 22 (3). pp. 427-431. ISSN 0045-7949

Ganapathi Rao, D. ; Ramamurti, V. ; Narayanan, S. (1986) Stress analysis of ribbed flanges Computers & Structures, 22 (4). pp. 725-735. ISSN 0045-7949

Ganapathi Rao, D. ; Ramamurti, V. ; Narayanan, S. (1985) Effect of bolt load on the deformation of a taper hub flange Computers & Structures, 21 (3). pp. 405-412. ISSN 0045-7949

Ramamurti, V. ; Kielb, R. (1984) Natural frequencies of twisted rotating plates Journal of Sound and Vibration, 97 (3). pp. 429-449. ISSN 0022-460X

Ramamurti, V. ; Balasubramanian, P. (1984) Application of Potter's method for frequency analysis Journal of Sound and Vibration, 96 (4). pp. 513-515. ISSN 0022-460X

Ramamurti, V. (1984) Natural frequencies of twisted rotating plates with geometric non-linearity Journal of Sound and Vibration, 96 (1). pp. 143-146. ISSN 0022-460X

Ramamurti, V. ; Balasubramanian, P. (1984) Analysis of turbomachine blades: a review The Shock and Vibration Digest, 16 (3). pp. 13-28. ISSN 0583-1024

Ramamurti, V. ; Jayarami Reddy, P. ; Nagaraj, V. T. (1983) Analysis of articulated landing gear behaviour Proceedings of the VI Wold Congress on T.M.M . pp. 588-591.

Ramamurti, V. ; Sivaprasad, N. ; Rayudu, G. V. N. (1983) Stress analysis of mill heads of large tube mills Zement Kalk Gips, 36 (3). pp. 429-449. ISSN 0341-0560

Ramamurti, V. ; Sivaprasad, N. (1983) Stress analysis of ribbed tube mills Zement Kalk Gips, 36 (2). pp. 65-74. ISSN 0341-0560

Kamath, M. ; Narasimhan, R. ; Nataraj, C. ; Ramamurti, V. (1982) Dynamic response of multicylinder engines with a viscous or hysteretic crankshaft damper Journal of Sound and Vibration, 81 (3). pp. 448-452. ISSN 0022-460X

Ramamurti, V. ; Shanmugavel, T. (1982) Stress analysis of axial flow cooling fans The Journal of Strain Analysis for Engineering Design, 17 (2). pp. 87-93. ISSN 0309-3247

Srinivasan, V. ; Ramamurti, V. (1981) Finite element analysis of the in-plane behaviour of annular disks Computers & Structures, 13 (4). pp. 553-561. ISSN 0045-7949

Sreenivasamurthy, S. ; Ramamurti, V. (1981) A parametric study of vibration of rotating pre-twisted and tapered low aspect ratio cantilever plates Journal of Sound and Vibration, 76 (3). pp. 311-328. ISSN 0022-460X

Sreenivasamurthy, S. ; Ramamurti, V. (1981) Coriolis effect on the vibration of flat rotating low aspect ratio cantilever plates The Journal of Strain Analysis for Engineering Design, 16 (2). pp. 97-106. ISSN 0309-3247

Ramamurti, V. ; Srinivasan, V. (1981) Stress analysis of webs of rimmed wheels The Journal of Strain Analysis for Engineering Design, 16 (1). pp. 1-8. ISSN 0309-3247

Srinivasan, V. ; Ramamurti, V. (1980) Dynamic response of an annular disk to a moving concentrated, in-plane edge load Journal of Sound and Vibration, 72 (2). pp. 251-262. ISSN 0022-460X

Ramamurti, V. ; Sreenivasamurthy, S. (1980) Dynamic stress analysis of rotating twisted and tapered blades The Journal of Strain Analysis for Engineering Design, 15 (3). pp. 117-126. ISSN 0309-3247

Srinivasan, V. ; Ramamurti, V. (1980) In-plane vibration of annular disks using finite elements Transactions of the ASME. Journal of Mechanical Design, 102 (3). pp. 585-588. ISSN 0161-8458

Srinivasan, V. ; Ramamurti, V. (1980) Stability and vibration of an annular plate with concentrated edge load Computers & Structures, 12 (1). pp. 119-129. ISSN 0045-7949

Sreenivasamurthy, S. ; Ramamurti, V. (1980) Effect of a tip mass on the natural frequencies of a rotating pre-twisted cantilever plate Journal of Sound and Vibration, 70 (4). pp. 598-601. ISSN 0022-460X

Srinivasan, V. ; Swarnamani, S. ; Ramamurti, V. (1980) Free vibration of a wheel Journal of Sound and Vibration, 70 (3). pp. 461-462. ISSN 0022-460X

Sathikh, S. ; Ramamurti, V. ; Chari, R. T. (1980) Acceptance curve for overhead line damper evaluation Proceedings of the IEEE, 68 (5). pp. 634-635. ISSN 0018-9219

Ramachandra, G. ; Srinivasan, V. ; Swarnamani, S. ; Ramamurti, V. (1980) Free vibration of horn diaphragms Journal of Sound and Vibration, 69 (1). pp. 162-166. ISSN 0022-460X

Srinivasan, V. ; Ramamurti, V. (1980) Bending of an annular plate in the presence of a concentrated, in-plane edge load International Journal of Mechanical Sciences, 22 (7). pp. 401-418. ISSN 0020-7403

Mahrenholtz, O. ; Reddy, D. V. ; Ramamurti, V. (1980) Ultimate load behaviour of internally pressurized "cut-and-cover" type underground nuclear reactor containments Canadian Journal of Civil Engineering, 7 (1). pp. 165-172. ISSN 0315-1468

Srinivasan, V. ; Ramamurti, V. (1979) Analysis of an annular disc with a concentrated, in-plane edge load The Journal of Strain Analysis for Engineering Design, 14 (3). pp. 119-132. ISSN 0309-3247

Ramamurti, V. ; Heckel, M. (1979) Schall Dammung von Rohren mit elliptischem Querschnitt Acustica, 43 (5). pp. 313-318. ISSN 0001-7884

Ramamurti, V. ; Gupta, L. S. (1978) Design of rotary kiln tyres Zement Kalk Gips, 31 (12). pp. 614-618. ISSN 0341-0560

Ramamurti, V. ; Ramanamurti, P. V. (1977) Impact on short length bars Journal of Sound and Vibration, 53 (4). pp. 529-543. ISSN 0022-460X

Ramamurti, V. ; Pattabiraman, J. (1977) Dynamic behaviour of a cylindrical shell with a cutout Journal of Sound and Vibration, 52 (2). pp. 193-200. ISSN 0022-460X

Pattabiraman Engineer, J. ; Ramamurti, V. (1977) Stresses around a small circular cutout in a cylindrical shell subjected to asymmetric bending The Journal of Strain Analysis for Engineering Design, 12 (1). pp. 53-61. ISSN 0309-3247

Ramamurti, V. ; Ramanamurti, P. V. (1977) Numerical solution to asymmetric impact of finite bars Mechanics Research Communications, 4 (3). pp. 145-150. ISSN 0093-6413

Ramamurti, V. ; Pattabiraman, J. (1976) Free vibrations of circular cylindrical shells Journal of Sound and Vibration, 48 (1). pp. 137-155. ISSN 0022-460X

Ganesan, N. ; Ramamurti, V. ; Rao, B. V. A. (1975) Torsional behaviour of prismatic shell of variable cross-section through finite-difference approach The Journal of Strain Analysis for Engineering Design, 10 (2). pp. 77-83. ISSN 0309-3247

Ramamurti, V. ; Ganesan, N. (1975) Torsional vibrations of prismatic shells Journal of Sound and Vibration, 38 (2). pp. 195-213. ISSN 0022-460X

Ganesan, N. ; Ramamurti, V. ; Rao, B. V. A. (1974) Torsional behaviour of machine tool columns International Journal of Machine Tool Design and Research, 14 (3). pp. 219-231. ISSN 0020-7357

Ramamurti, V. ; Mahrenholtz, O. (1974) The application of the simultaneous iteration method to flexural vibration problems International Journal of Mechanical Sciences, 16 (5). pp. 269-283. ISSN 0020-7403

Ramamurti, V. ; Alwar, R. S. (1973) Comparison of elasticity theory and shell theory solutions Computers & Structures, 3 (6). pp. 1345-1355. ISSN 0045-7949

Wagner, H. ; Ramamurti, V. ; Sastry, R. V. R. ; Hartmann, K. (1973) Dynamics of stockbridge dampers Journal of Sound and Vibration, 30 (2). pp. 207-220. ISSN 0022-460X

Ramamurti, V. (1973) Application of simultaneous iteration method to torsional vibration problems Journal of Sound and Vibration, 29 (3). pp. 331-340. ISSN 0022-460X

Ramamurti, V. ; Alwar, R. S. (1973) Stress analysis of a tube mill The Journal of Strain Analysis for Engineering Design, 8 (3). pp. 200-208. ISSN 0309-3247

Alwar, R. S. ; Ramamurti, V. (1970) Asymmetric bending of cylindrical conical shell junction Nuclear Engineering and Design, 12 (1). pp. 97-121. ISSN 0029-5493