Browse by Fellow

Prasad, Y. V. R. K. ; Rao, K. P. (2009) Effect of homogenization on the hot deformation behavior of cast AZ31 magnesium alloy Materials & Design, 30 (9). pp. 3723-3730. ISSN 0261-3069

Prasad, Y. V. R. K. ; Rao, K. P. ; Gupta, M. (2009) Hot workability and deformation mechanisms in Mg/nano-Al₂O₃ composite Composites Science and Technology, 69 (7-8). pp. 1070-1076. ISSN 0266-3538

Vyas, A. ; Rao, K. P. ; Prasad, Y. V. R. K. (2009) Mechanical alloying characteristics and thermal stability of Ti–Al–Si and Ti–Al–Si–C powders Journal of Alloys and Compounds, 475 (1-2). pp. 252-260. ISSN 0925-8388

Prasad, Y. V. R. K. ; Rao, K. P. ; Hort, N. ; Kainer, K. U. (2009) Optimum parameters and rate-controlling mechanisms for hot working of extruded Mg–3Sn–1Ca alloy Materials Science and Engineering: A, 502 (1-2). pp. 25-31. ISSN 0921-5093

Prasad, Y. V. R. K. ; Rao, K. P. ; Hort, N. ; Kainer, K. U. (2008) Hot working parameters and mechanisms in as-cast Mg–3Sn–1Ca alloy Materials Letters, 62 (26). pp. 4207-4209. ISSN 0167-577X

Prasad, Y. V. R. K. ; Rao, K. P. (2008) Processing maps for hot deformation of rolled AZ31 magnesium alloy plate: anisotropy of hot workability Materials Science and Engineering A, 487 (1-2). pp. 316-327. ISSN 0921-5093

Rao, K. P. ; Prasad, Y. V. R. K. ; Hort, N. ; Kainer, K. U. (2008) Hot workability characteristics of cast and homogenized Mg–3Sn–1Ca alloy Journal of Materials Processing Technology, 201 (1-3). pp. 359-363. ISSN 0924-0136

Srinivasan, N. ; Prasad, Y. V. R. K. ; Rama Rao, P. (2008) Hot deformation behaviour of Mg-3Al alloy-A study using processing map Materials Science and Engineering: A, 476 (1-2). pp. 146-156. ISSN 0921-5093

Chakravartty, J. K. ; Kapoor, R. ; Banerjee, S. ; Prasad, Y. V. R. K. (2007) Characterization of hot deformation behavior of Zr–1Nb–1Sn alloy Journal of Nuclear Materials, 362 (1). pp. 75-86. ISSN 0022-3115

Ravi, R. ; Prasad, Y. V. R. K. ; Sarma, V. V. S. (2007) An artificial neural network (ANN) model for predicting instability regimes in copper-aluminum alloys Materials and Manufacturing Processes, 22 (7&8). pp. 846-850. ISSN 1042-6914

Prasad, Y. V. R. K. ; Rao, K. P. (2006) Effect of crystallographic texture on the kinetics of hot deformation of rolled Mg–3Al–1Zn alloy plate Materials Science and Engineering: A, 432 (1-2). pp. 170-177. ISSN 0921-5093

Prasad, Y. V. R. K. ; Rao, K. P. (2006) Influence of oxygen on the processing maps for hot working of electrolytic tough pitch copper Materials Letters, 60 (21-22). pp. 2786-2790. ISSN 0167-577X

Ravi, R. ; Prasad, Y. V. R. K. ; Sarma, V. V. S. ; Raidu, R. S. (2006) Artificial neural network model for predicting stable and unstable regions in Cu-Zn alloys Materials and Manufacturing Processes, 21 (8). pp. 756-760. ISSN 1042-6914

Prasad, Y. V. R. K. ; Rao, K. P. (2005) Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300–950°C Materials Science and Engineering A, 391 (1-2). pp. 141-150. ISSN 0921-5093

Prasad, Y. V. R. K. ; Rao, K. P. (2004) Mechanisms of high temperature deformation in electrolytic copper in extended ranges of temperature and strain rate Materials Science and Engineering A, 374 (1-2). pp. 335-341. ISSN 0921-5093

Prasad, Y. V. R. K. ; Rao, K. P. (2004) Influence of oxygen on rate-controlling mechanisms in hot deformation of polycrystalline copper: oxygen-free versus electrolytic grades Materials Letters, 58 (14). pp. 2061-2066. ISSN 0167-577X

Sivakesavam, O. ; Prasad, Y. V. R. K. (2003) Hot deformation behaviour of as-cast Mg–2Zn–1Mn alloy in compression: a study with processing map Materials Science and Engineering A, 362 (1-2). pp. 118-124. ISSN 0921-5093

Ravi, R. ; Prasad, Y. V. R. K. ; Sarma, V. V. S. (2003) Development of expert systems for the design of a hot-forging process based on material workability Journal of Materials Engineering and Performance, 12 (6). pp. 646-652. ISSN 1059-9495

Prasad, Y. V. R. K. (2003) Processing maps: a status report Journal of Materials Engineering and Performance, 12 (6). pp. 638-645. ISSN 1059-9495

Sundaram, R. S. ; Sastry, D. H. ; Prasad, Y. V. R. K. (2003) Hot workability of as-cast Fe₃Al-2.5%Cr intermetallic alloy Materials Science and Engineering A, 347 (1-2). pp. 86-92. ISSN 0921-5093

Sivaprasad, P. V. ; Venugopal, S. ; Venugopal, Sridhar ; Maduraimuthu, V. ; Vasudevan, M. ; Mannan, S. L. ; Prasad, Y. V. R. K. ; Chaturvedi, R. C. (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests Journal of Materials Processing Technology, 132 (1-3). pp. 262-268. ISSN 0924-0136

Balasubrahmanyam, V. V. ; Prasad, Y. V. R. K. (2002) Deformation behaviour of beta titanium alloy Ti–10V–4.5Fe–1.5Al in hot upset forging Materials Science and Engineering A, 336 (1-2). pp. 150-158. ISSN 0921-5093

Seshacharyulu, T. ; Medeiros, S. C. ; Frazie, W. G. ; Prasad, Y. V. R. K. (2002) Microstructural mechanisms during hot working of commercial grade Ti–6Al–4V with lamellar starting structure Materials Science and Engineering A, 325 (1-2). pp. 112-125. ISSN 0921-5093

Sivakesavam, O. ; Prasad, Y. V. R. K. (2002) Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg–11.5Li-1.5Al alloy Materials Science and Engineering A, 323 (1-2). pp. 270-277. ISSN 0921-5093

Balasubrahmanyam, V. V. ; Prasad, Y. V. R. K (2001) Hot deformation mechanisms in Ti-5.5Al-1Fe alloy Journal of Materials Engineering and Performance, 10 (6). pp. 731-739. ISSN 1059-9495

Prasad, Y. V. R. K. ; Sastry, D. H. ; Deevi, S. C. (2001) Hot working behavior of extruded powder products of B2 iron aluminide alloys Materials Science and Engineering A, 311 (1-2). pp. 42-53. ISSN 0921-5093

Tamirisakandala, S. ; Medeiros, Steve C. ; Frazier, William G. ; Prasad, Y. V. R. K. (2001) Strain-induced porosity during cogging of extra-low interstitial grade Ti-6Al-4V Journal of Materials Engineering and Performance, 10 (2). pp. 125-130. ISSN 1059-9495

Sastry, D. H. ; Prasad, Y. V. R. K. ; Deevi, S. C. (2001) Influence of temperature and strain rate on the flow stress of an FeAl alloy Materials Science and Engineering A, 299 (1-2). pp. 157-163. ISSN 0921-5093

Prasad, Y. V. R. K. ; Seshacharyulu, T. ; Medeiros, S. C. ; Frazier, W. G. (2001) Influence of oxygen content on the forging response of equiaxed (α+β) preform of Ti–6Al–4V: commercial vs. ELI grade Journal of Materials Processing Technology, 108 (3). pp. 320-327. ISSN 0924-0136

Seshacharyulu, T. ; Medeiros, Steve C. ; Frazier, William G. ; Prasad, Y. V. R. K. (2001) Unstable flow during supratransus working of Ti–6Al–4V Materials Letters, 47 (3). pp. 133-139. ISSN 0167-577X

Medeiros, S. C. ; Prasad, Y. V. R. K. ; Frazier, W. G. ; Srinivasan, R. (2000) Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy Materials Science and Engineering A, 293 (1-2). pp. 198-207. ISSN 0921-5093

Prasad, Y. V. R. K. ; Sasidhara, S. ; Sikka, V. K. (2000) Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy Intermetallics, 8 (9-11). pp. 987-995. ISSN 0966-9795

Medeiros, S. C. ; Frazier, W. G. ; Prasad, Y. V. R. K. (2000) Hot deformation mechanisms in a powder metallurgy nickel-base superalloy IN 625 Metallurgical and Materials Transactions A, 31A (9). pp. 2317-2325. ISSN 1073-5623

Prasad, Y. V. R. K. ; Sastry, D. H. ; Deevi, S. C. (2000) Processing maps for hot working of a P/M iron aluminide alloy Intermetallics, 8 (9-11). pp. 1067-1074. ISSN 0966-9795

Seshacharyulu, T. ; Medeiros, S. C. ; Frazier, W. G. ; Prasad, Y. V. R. K. (2000) Hot working of commercial Ti–6Al–4V with an equiaxed α–β microstructure: materials modeling considerations Materials Science and Engineering A, 284 (1-2). pp. 184-194. ISSN 0921-5093

Prasad, Y. V. R. K. ; Seshacharyul, T. ; Medeiros, S. C. ; Frazier, W. G. (2000) Effect of prior β-grain size on the hot deformation behavior of Ti-6Al-4V: coarse vs coarser Journal of Materials Engineering and Performance, 9 (2). pp. 153-160. ISSN 1059-9495

Radhakrishna Bhat, B. V. ; Mahajan, Y. R. ; Prasad, Y. V. R. K. (2000) Effect of volume fraction of SiC_p reinforcement on the processing maps for 2124 Al matrix composites Metallurgical and Materials Transactions A, 31A (3). pp. 629-639. ISSN 1073-5623

Seshacharyulu, T. ; Medeiros, S. C. ; Morgan, J. T. ; Malas, J. C. ; Frazier, W. G. ; Prasad, Y. V. R. K. (2000) Hot deformation and microstructural damage mechanisms in extra-low interstitial (ELI) grade Ti–6Al–4V Materials Science and Engineering A, 279 (1-2). pp. 289-299. ISSN 0921-5093

Sundar, R. S. ; Baligidad, R. G. ; Prasad, Y. V. R. K. ; Sastry, D. H. (1998) Processing of iron aluminides Materials Science and Engineering A, 258 (1-2). pp. 219-228. ISSN 0921-5093

Narayan, S. P. ; Basu, K. ; Prasad, Y. V. R. K. ; Jayaram, V. ; Das, B. N. (1998) A study of the formability of melt spun Nd-Fe-B magnets Scripta Materialia, 38 (11). pp. 1725-1730. ISSN 1359-6462

Somani, M. C. ; Muraleedharan, K. ; Prasad, Y. V. R. K. ; Singh, V. (1998) Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy Materials Science and Engineering A, 245 (1). pp. 88-89. ISSN 0921-5093

Prasad, Y. V. R. K. ; Seshacharyulu, T. (1998) Processing maps for hot working of titanium alloys Materials Science and Engineering A, 243 (1-2). pp. 82-88. ISSN 0921-5093

Gopala Krishna, V. ; Prasad, Y. V. R. K. ; Birla, N. C. ; Sambasiva Rao, G. (1997) Processing map for the hot working of near-α titanium alloy 685 Journal of Materials Processing Technology, 71 (3). pp. 377-383. ISSN 0924-0136

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1997) Instability map for cold and warm working of as-cast 304 stainless steel Journal of Materials Processing Technology, 65 (1-3). pp. 107-115. ISSN 0924-0136

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1997) On the modelling of grain size during hot working of stainless steels type AISI 304 and 316 Journal of Materials Science Letters, 16 (2). pp. 137-142. ISSN 0261-8028

Sagar, P. K. ; Banerjee, D. ; Muraleedharan, K. ; Prasad, Y. V. R. K. (1996) High-temperature deformation processing of Ti-24Al-20Nb Metallurgical and Materials Transactions A, 27A (9). pp. 2593-2604. ISSN 1073-5623

Venugopal, S. ; Venugopal, Sridhar ; Sivaprasad, P. V. ; Vasudevan, M. ; Mannan, S. L. ; Jha, S. K. ; Pandey, P. ; Prasad, Y. V. R. K. (1996) Validation of processing maps for 304L stainless steel using hot forging, rolling and extrusion Journal of Materials Processing Technology, 59 (4). pp. 343-350. ISSN 0924-0136

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1996) Influence of strain rate and state-of-stress on the formation of ferrite in stainless steel type AISI 304 during hot working Materials Letters, 26 (3). pp. 161-165. ISSN 0167-577X

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1996) Optimization of cold and warm workability in 304 stainless steel using instability maps Metallurgical and Materials Transactions A, 27A (1). pp. 119-126. ISSN 1073-5623

Chakravartty, J. K. ; Dey, G. K. ; Banerjee, S. ; Prasad, Y. V. R. K. (1996) Dynamic recrystallization during hot working of Zr-2·5Nb: characterizing using processing maps Materials Science and Technology, 12 (9). pp. 705-716. ISSN 0267-0836

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1995) Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps Journal of Nuclear Materials, 227 (1-2). pp. 1-10. ISSN 0022-3115

Somani, M. C. ; Birla, N. C. ; Prasad, Y. V. R. K. ; Singh, V. (1995) Microstructural validation of processing maps using the hot extrusion of P/M Nimonic AP-1 superalloy Journal of Materials Processing Technology, 52 (2-4). pp. 225-237. ISSN 0924-0136

Srinivasa, N. ; Prasad, Y. V. R. K. (1995) Hot working characteristics of nimonic 75, 80A and 90 superalloys: a comparison using processing maps Journal of Materials Processing Technology, 51 (1-4). pp. 171-192. ISSN 0924-0136

Chakravartty, J. K. ; Dey, G. K. ; Banerjee, S. ; Prasad, Y. V. R. K. (1995) Characterization of hot deformation behaviour of Zr-2.5Nb-0.5Cu using processing maps Journal of Nuclear Materials, 218 (2). pp. 247-255. ISSN 0022-3115

Sarkar, J. ; Prasad, Y. V. R. K. ; Surappa, M. K. (1995) Optimization of hot workability of an Al-Mg-Si alloy using processing maps Journal of Materials Science, 30 (11). pp. 2843-2848. ISSN 0022-2461

Radhakrishna Bhat, B. V. ; Mahajan, Y. R. ; Roshan, H. Md. ; Prasad, Y. V. R. K. (1994) Characteristics of superplasticity domain in the processing map for hot working of an Al alloy 2014-20vol.%Al₂O₃ metal matrix composite Materials Science and Engineering A, 189 (1-2). pp. 137-145. ISSN 0921-5093

Kailas, Satish V. ; Prasad, Y. V. R. K. ; Biswas, S. K. (1994) Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K Metallurgical and Materials Transactions A, 25A (10). pp. 2173-2179. ISSN 1073-5623

Srinivasan, N. ; Prasad, Y. V. R. K. (1994) Microstructural control in hot working of IN-718 superalloy using processing map Metallurgical and Materials Transactions A, 25A (10). pp. 2275-2284. ISSN 1073-5623

Somani, M. C. ; Muraleedharan, K. ; Birla, N. C. ; Singh, V. K. ; Prasad, Y. V. R. K. (1994) Hot deformation characteristics of INCONEL alloy MA 754 and development of a processing map Metallurgical and Materials Transactions A, 25A (8). pp. 1693-1702. ISSN 1073-5623

Kailas, Satish V. ; Prasad, Y. V. R. K. ; Biswas, S. K. (1994) Influence of initial texture on the microstructural instabilities during compression of commercial α-titanium at 25°C to 400°C Metallurgical and Materials Transactions A, 25A (7). pp. 1425-1434. ISSN 1073-5623

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1994) Processing maps for hot working of commercial grade wrought stainless steel type AISI 304 Materials Science and Engineering A, 177 (1-2). pp. 143-149. ISSN 0921-5093

Sagar, P. K. ; Banerjee, D. ; Prasad, Y. V. R. K. (1994) Processing of an α-2 aluminide alloy, Ti-24Al-11Nb Materials Science and Engineering A, 177 (1-2). pp. 185-197. ISSN 0921-5093

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1993) Influence of cast versus wrought microstructure on the processing map for hot working of stainless steel type AISI 304 Materials Letters, 17 (6). pp. 388-392. ISSN 0167-577X

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1993) Influence of state of stress on the processing map for hot working of stainless steel type AISI 304L: compression vs. torsion Materials Science and Engineering A, 160 (1). pp. 63-69. ISSN 0921-5093

Kailas, Satish V. ; Prasad, Y. V. R. K. ; Biswas, S. K. (1993) Microstructural features of flow Metallurgical and Materials Transactions A, 24 (11). pp. 2513-2520. ISSN 1073-5623

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1993) Processing map for cold and hot working of as-cast stainless steel type AISI 304 Journal of Materials Science Letters, 12 (23). pp. 1875-1878. ISSN 0261-8028

Padmavardhani, D. ; Prasad, Y. V. R. K. (1993) Processing maps for hot working of Cu-Ni-Zn alloys Journal of Materials Science, 28 (19). pp. 5269-5274. ISSN 0022-2461

Radhakrishna Bhat, B. V. ; Mahajan, Y. R. ; Roshan, H. Md. ; Prasad, Y. V. R. K. (1993) Processing maps for hot-working of powder metallurgy 1100 Al-10 vol % SiC-particulate metal-matrix composite Journal of Materials Science, 28 (8). pp. 2141-2147. ISSN 0022-2461

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1992) Optimization of hot workability in stainless Metallurgical and Materials Transactions A, 23A (11). pp. 3093-3103. ISSN 1073-5623

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1992) Processing map for cold and hot working of stainless steel type AISI 304 L Materials Letters, 15 (1-2). pp. 79-83. ISSN 0167-577X

Somani, M. C. ; Bhagiradha Rao, E. S. ; Birla, N. C. ; Bhatia, M. L. ; Singh, Vakil ; Prasad, Y. V. R. K. (1992) Processing map for controlling microstructure in hot working of hot isostatically pressed powder metallurgy NIMONIC AP-1 superalloy Metallurgical and Materials Transactions A, 23A (10). pp. 2849-2857. ISSN 1073-5623

Padmavardhani, D. ; Prasad, Y. V. R. K. (1992) Effect of zinc content on the processing map for hot working of α brass Materials Science and Engineering A, 157 (1). pp. 43-51. ISSN 0921-5093

Ravichandran, N. ; Prasad, Y. V. R. K. (1992) Influence of oxygen on dynamic recrystallization during hot working of polycrystalline copper Materials Science and Engineering A, 156 (2). pp. 195-204. ISSN 0921-5093

Chakravartty, J. K. ; Banerjee, S. ; Prasad, Y. V. R. K. ; Asundi, M. K. (1992) Hot-working characteristics of zircaloy-2 in the temperature range of 650-950°C Journal of Nuclear Materials, 187 (3). pp. 260-271. ISSN 0022-3115

Padmavardhani, D. ; Prasad, Y. V. R. K. (1991) Characterization of hot deformation behavior of brasses using processing maps: Part I. α Brass Metallurgical and Materials Transactions A, 22A (12). pp. 2985-2992. ISSN 1073-5623

Padmavardhani, D. ; Prasad, Y. V. R. K. (1991) Characterization of hot deformation behavior of brasses using processing maps: Part II. β Brass and α-β brass Metallurgical and Materials Transactions A, 22A (12). pp. 2993-3001. ISSN 1073-5623

Ravichandran, N. ; Prasad, Y. V. R. K. (1991) Dynamic recrystallization during hot deformation of aluminum: a study using processing maps Metallurgical and Materials Transactions A, 22A (10). pp. 2339-2348. ISSN 1073-5623

Prasad, Y. V. R. K. ; Ravichandran, N. (1991) Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: a study using processing maps Bulletin of Materials Science, 14 (5). pp. 1241-1248. ISSN 0250-4707

Chakravartty, J. K. ; Prasad, Y. V. R. K. ; Asundi, M. K. (1991) Processing map for hot working of alpha-zirconium Metallurgical and Materials Transactions A, 22 (4). pp. 829-836. ISSN 1073-5623

Rao, K. P. ; Prasad, Y. V. R. K. ; Sivaram, K. (1990) Deformation processing map for control of microstructure in Al-4Mg alloy Materials Letters, 10 (1-2). pp. 66-70. ISSN 0167-577X

Arora, P. R. ; Raghavan, M. R. ; Prasad, Y. V. R. K. (1988) Effect of prestrain on fatigue crack propagation in mild steel containing non-metallic inclusions Engineering Fracture Mechanics, 29 (1). pp. 67-79. ISSN 0013-7944

Rao, K. P. ; Prasad, Y. V. R. K. (1986) High temperature deformation kinetics of Al-4Mg alloy Journal of Mechanical Working Technology, 13 (1). pp. 83-95. ISSN 0378-3804

Prasad, Y. V. R. K. ; Gegel, H. L. ; Doraivelu, S. M. ; Malas, J. C. ; Morgan, J. T. ; Lark, K. A. ; Barker, D. R. (1984) Modeling of dynamic material behavior in hot deformation: forging of Ti-6242 Metallurgical and Materials Transactions A, 15A (10). pp. 1883-1892. ISSN 1073-5623

Sambasiva Rao, G. ; Prasad, Y. V. R. K. (1983) Changes in texture and grain size in hot rolled magnesium and effect on yield strength Bulletin of Materials Science, 5 (5). pp. 459-464. ISSN 0250-4707

Rao, K. P. ; Doraivelu, S. M. ; Roshan, H. Md. ; Prasad, Y. V. R. K. (1983) Deformation processing of an aluminum alloy containing particles: studies on AI-5 pct Si alloy 4043 Metallurgical and Materials Transactions A, 14A (8). pp. 1671-1679. ISSN 1073-5623

Jain, N. K. ; Nair, C. G. K. ; Abraham, K. P. ; Prasad, Y. V. R. K. (1983) High-temperature deformation of ESR En 36 steel Met Technol, 10 (1). pp. 1-5.

Sambasiva Rao, G. ; Prasad, Y. V. R. K. (1983) Contribution of texture to the strengthening and fracture in hot-rolled magnesium-12·7 at % cadmium alloy Journal of Materials Science, 18 (8). pp. 2385-2392. ISSN 0022-2461

Sambasiva Rao, G. ; Prasad, Y. V. R. K. (1982) Grain boundary strengthening in strongly textured magnesium produced by hot rolling Metallurgical and Materials Transactions A, 13A (12). pp. 2219-2226. ISSN 1073-5623

Sastry, Srinivas D. ; Rohatgi, P. K. ; Abraham, K. P. ; Prasad, Y. V. R. K. (1982) Influence of heat treatment on the strength and fracture behaviour of Fe-12Cr-6Al ferritic stainless steel Journal of Materials Science, 17 (10). pp. 3009-3016. ISSN 0022-2461

Hebsur, Mohan G. ; Abraham, K. P. ; Prasad, Y. V. R. K. (1981) Influence of electroslag refining on the hot ductility of AISI 4340 steel in torsion Journal of Mechanical Working Technology, 4 (4). pp. 341-349. ISSN 0378-3804

Prasad, Y. V. R. K. ; Rama Rao, P. (1980) Alloy design for fracture resistance Sadhana (Academy Proceedings in Engineering Sciences), 3 (4). pp. 315-331. ISSN 0256-2499

Hebsur, Mohan G. ; Abraham, K. P. ; Prasad, Y. V. R. K. (1980) Fatigue crack growth rates and fracture toughness in electroslag refined En 52 steel International Journal of Fatigue, 2 (4). pp. 147-152. ISSN 0142-1123

Hebsur, Mohan G. ; Abraham, K. P. ; Prasad, Y. V. R. K. (1980) Effect of electroslag refining on the fracture toughness and fatigue crack propagation rates in heat treated AISI 4340 steel Engineering Fracture Mechanics, 13 (4). pp. 851-864. ISSN 0013-7944

Sudhaker Nayak, H. V. ; Vasu, K. I. ; Prasad, Y. V. R. K. (1980) Texture dependent stress corrosion failure of commercial titanium sheets in bromine-methanol solution Journal of Materials Science, 15 (5). pp. 1265-1275. ISSN 0022-2461

Sastry, Srinivas D. ; Rohatgi, P. K. ; Abraham, K. P. ; Prasad, Y. V. R. K. (1979) Mechanism of strengthening in high temperature treated Fe-12Cr-6Al ferritic stainless steel Scripta Metallurgica, 13 (9). pp. 817-822. ISSN 0036-9748

Yegneswaran, A. H. ; Prasad, Y. V. R. K. ; Raman, K. S. (1978) Effect of grain size and texture on the mechanical properties of warm worked cadmium-1.5 Pct zinc alloy Metallurgical and Materials Transactions A, 9A (9). pp. 1311-1316. ISSN 1073-5623

Sastry, D. H. ; Prasad, Y. V. R. K. ; Vasu, K. I. ; Rama Rao, P. (1973) On the orientation of grain boundaries in cadmium recrystallized during hot deformation Journal of Materials Science, 8 (10). pp. 1517-1519. ISSN 0022-2461

Sastry, D. H. ; Prasad, Y. V. R. K. ; Vasu, K. I. (1971) Low-temperature deformation behaviour of polycrystalline copper Journal of Materials Science, 6 (12). pp. 1433-1440. ISSN 0022-2461

Sastry, D. H. ; Prasad, Y. V. R. K. ; Vasu, K. I. (1971) An evaluation of rate-controlling obstacles for low-temperature deformation of zirconium Journal of Materials Science, 6 (4). pp. 332-341. ISSN 0022-2461

Prasad, Y. V. R. K. ; Sastry, D. H. ; Vasu, K. I. (1970) Mechanism of low-temperature deformation in quenched aluminium-magnesium alloys Materials Science and Engineering, 6 (5). pp. 327-333. ISSN 0025-5416

Sastry, D. H. ; Prasad, Y. V. R. K. ; Vasu, K. I. (1970) Obstacles for low-temperature dislocation motion in polycrystalline zinc Metallurgical and Materials Transactions B, 1 (7). pp. 1827-1831. ISSN 1073-5615

Prasad, Y. V. R. K. ; Sastry, D. H. ; Vasu, K. I. (1970) Effect of stacking-fault energy on thermal activation of attractive junctions in change-in-stress creep of FCC metals Journal of Materials Science, 5 (6). pp. 495-506. ISSN 0022-2461

Sastry, D. H. ; Prasad, Y. V. R. K. ; Vasu, K. L. (1969) On the low temperature deformation mechanism in polycrystalline cadmium Acta Metallurgica, 17 (12). pp. 1453-1457. ISSN 0001-6160