Browse by Fellow

Vasu, K. ; Ghanashyam Krishna, M. ; Padmanabhan, K. A. (2011) Conductive-atomic force microscopy study of local electron transport in nanostructured titanium nitride thin films Thin Solid Films, 519 (22). pp. 7702-7706. ISSN 0040-6090

Nagarajan, S. ; Dinakaran, M. K. ; Ganapath Kumar, V. ; Rajaram, N. ; Mohan Das, T. ; Padmanabhan, K. A. (2011) On the use of glycosylated single-walled carbon nanotubes as a coolant additive Nanoscience and Nanotechnology Letters, 3 (4). pp. 477-482. ISSN 1941-4900

Kiran, M. S. R. N. ; Ghanashyam Krishna, M. ; Padmanabhan, K. A. (2011) Substrate-dependent structure, microstructure, composition and properties of nanostructured TiN films Solid State Communications, 151 (7). pp. 561-563. ISSN 0038-1098

Vasu, K. ; Ghanashyam Krishna, M. ; Padmanabhan, K. A. (2011) Substrate-temperature dependent structure and composition variations in RF magnetron sputtered titanium nitride thin films Applied Surface Science, 257 (7). pp. 3069-3074. ISSN 0169-4332

Sitarama Raju, K. ; Ghanashyam Krishna, M. ; Padmanabhan, K. A. ; Subramanya Sarma, V. ; Gurao, N. P. ; Wilde, G. (2011) Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes Journal of Materials Science, 46 (8). pp. 2662-2671. ISSN 0022-2461

Divinski, Sergiy V. ; Padmanabhan, K. A. ; Wilde, Gerhard (2011) Microstructure evolution during severe plastic deformation Philosophical Magazine, 91 (36). pp. 4574-4593. ISSN 1478-6435

Padmanabhan, K. A. ; Balasivanandha Prabu, S. (2011) Ultrafine grained materials through mechanical processing: an assessment VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008) . pp. 133-142.

Karthikeyan, L. ; Senthilkumar, V. S. ; Padmanabhan, K. A. (2010) Biaxial stressing of sheets of friction stir processed aluminum alloy A319 Materials and Manufacturing Processes, 25 (11). pp. 1297-1303. ISSN 1042-6914

Divinski, Sergiy V. ; Anantha Padmanabhan, K. ; Wilde, Gerhard (2010) On the theoretical limits of microstructure evolution in severe plastic deformation Materials Science Forum, 667-669 . pp. 283-288. ISSN 0255-5476

Sankaran, S. ; Pathak, Piyush ; Sangal, Sandeep ; Padmanabhan, K. A. (2010) Application of the disector to determine the distribution of true interlamellar spacing in lamellar microstructures Practical Metallography, 47 (4). pp. 206-216. ISSN 0032-678X

Karthikeyan, L. ; Senthilkumar, V. S. ; Padmanabhan, K. A. (2010) On the role of process variables in the friction stir processing of cast aluminum A319 alloy Materials & Design, 31 (2). pp. 761-771. ISSN 0261-3069

Padmanabhan, K. A. ; Raviathul Basariya, M. (2009) Mesoscopic grain boundary sliding as the rate controlling process for high strain rate superplastic deformation Materials Science and Engineering: A, 527 (1-2). pp. 225-234. ISSN 0921-5093

Rösner, H. ; Boucharat, N. ; Markmann, J. ; Padmanabhan, K. A. ; Wilde, G. (2009) In situ transmission electron microscopic observations of deformation and fracture processes in nanocrystalline palladium and Pd₉₀Au₁₀ Materials Science and Engineering: A, 525 (1-2). pp. 102-106. ISSN 0921-5093

Padmanabhan, K. A. (2009) Grain boundary sliding controlled flow and its relevance to superplasticity in metals, alloys, ceramics and intermetallics and strain-rate dependent flow in nanostructured materials Journal of Materials Science, 44 (9). pp. 2226-2238. ISSN 0022-2461

Bkhattacharya, S. S. ; Bylya, O. I. ; Vasin, R. A. ; Padmanabhan, K. A. (2009) Mechanical behavior of titanium alloy Ti-6Al-4V with unprepared microstructure under jumpwise variations of the strain rate in the superplastic state Mechanics of Solids, 44 (6). pp. 951-958. ISSN 0025-6544

Kiran, M. S. R. N. ; Ghanashyam Krishna, M. ; Padmanabhan, K. A. (2008) Growth, surface morphology, optical properties and electrical resistivity of ε-TiN_x (0.4<x≤=0.5) films Applied Surface Science, 255 (5). pp. 1934-1941. ISSN 0169-4332

Padmanabhan, K. A. ; Sankaran, S. (2008) Fatigue behavior of a multiphase medium carbon V-bearing microalloyed steel processed through two thermomechanical routes Journal of Materials Processing Technology, 207 (1-3). pp. 293-300. ISSN 0924-0136

Sitarama Raju, K. ; Ghanashyam Krishna, M. ; Padmanabhan, K. A. ; Muraleedharan, K. ; Gurao, N. P. ; Wilde, G. (2008) Grain size and grain boundary character distribution in ultra-fine grained (ECAP) nickel Materials Science and Engineering: A, 491 (1-2). pp. 1-7. ISSN 0921-5093

Vasu, K. ; Kiran, M. S. R. N. ; Ghanashyam Krishna, M. ; Padmanabhan, K. A. (2008) Effect of substrate on the crystallographic texture and microstructure evolution in Titanium Nitride thin films Solid State Physics, 53 . p. 681. ISSN 0081-1947

Kiran, M. S. R. N. ; Ghanashyam Krishna , M. ; Padmanabhan, K.A. (2008) Interfacial engineering of nanostructured titanium nitride thin filmsn International Journal of Nanomanufacturing , 2 (5). pp. 420-441. ISSN 1746-9392

Padmanabhan, K. A. ; Dinda, G. P. ; Hahn, H. ; Gleiter, H. (2007) Inverse Hall–Petch effect and grain boundary sliding controlled flow in nanocrystalline materials Materials Science and Engineering: A, 452-453 . pp. 462-468. ISSN 0921-5093

Padmanabhan, K. A. (2007) Strain distribution on the surface of specimen in superplastic compression Materials Letters, 61 (2). pp. 605-608. ISSN 0167-577X

Sankaran, S. ; Gouthama, ; Sangal, S. ; Padmanabhan, K. A. (2006) Transmission electron microscopy studies of thermomechanically control processed multiphase medium-carbon microalloyed steel: forged, rolled, and low-cycle fatigued microstructures Metallurgical and Materials Transactions A, 37 (11). pp. 3259-3273. ISSN 1073-5623

Sankaran, S. ; Malakondaiah, G. ; Gouthama, ; Sangal, S. ; Padmanabhan, K. A. (2006) Static and dynamic fracture toughness of a medium carbon microalloyed steel of three different microstructures Metallurgical and Materials Transactions A, 37 (4). pp. 1191-1200. ISSN 1073-5623

Malla Reddy, C. ; Kirchner, Michael T. ; Gundakaram, Ravi C. ; Anantha Padmanabhan, K. ; Desiraju, Gautam R. (2006) Isostructurality, polymorphism and mechanical properties of some hexahalogenated benzenes: the nature of halogen···halogen interactions Chemistry - A European Journal, 12 (8). pp. 2222-2234. ISSN 0947-6539

Reddy, C. Malla ; Padmanabhan, K. Anantha ; Desiraju, Gautam R. (2006) Structure-property correlations in bending and brittle organic crystals Crystal Growth & Design, 6 (12). pp. 2720-2731. ISSN 1528-7483

Sankaran, S. ; Sangal, S. ; Padmanabhan, K. A. (2005) Microstructural evolution and tensile behaviour of medium carbon microalloyed steel processed through two thermomechanical routes Materials Science and Technology, 21 (10). pp. 1152-1160. ISSN 0025-5416

Padmanabhan, K. A. ; Mondal, P. ; Hahn, H. (2005) Micro-indentation creep of porous nanocrystalline metallic and composite compacts Journal of Materials Science , 40 (23). pp. 6113-6120. ISSN 0022-2461

Sankaran, S. ; Gouthama, ; Sangal, S. ; Padmanabhan, K. A. (2005) Microstructural changes accompanying high strain amplitude fatigue tests on a multiphase medium carbon microalloyed steel Journal of Materials Science, 40 (2). pp. 499-502. ISSN 0022-2461

Shanmugam, S. ; Misra, R. D. K. ; Padmanabhan, K. A. (2005) On the relationship between microstructural changes induced during high strain amplitude fatigue loading and fatigue softening in multiphase medium carbon microalloyed steel Proceedings of Materials Science and Technology Conference . No pp. given.

Reddy, C. Malla ; Gundakaram, Ravi C. ; Basavoju, Srinivas ; Kirchner, Michael T. ; Padmanabhan, K. Anantha ; Desiraju, Gautam R. (2005) Structural basis for bending of organic crystals Chemical Communications (31). pp. 3945-3947. ISSN 1359-7345

Padmanabhan, Kuppuswamy Anantha ; Gleiter, H. (2004) Optimal structural superplasticity in metals and ceramics of microcrystalline- and nanocrystalline-grain sizes Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 381 (1-2). pp. 28-38. ISSN 0921-5093

Sankaran, S. ; Subramanya Sarma, V. ; Padmanabhan, K. A. ; Jaeger, G. ; Koethe, A. (2003) High cycle fatigue behaviour of a multiphase microalloyed medium carbon steel: a comparison between ferrite-pearlite and tempered martensite microstructures Materials Science and Engineering A, 362 (1-2). pp. 249-256. ISSN 0921-5093

Padmanabhan, K. A. (2003) Thermally assisted deformation of structural superplastics and nanostructured materials: a personal perspective Sadhana (Academy Proceedings in Engineering Sciences), 28 (1-2). pp. 97-113. ISSN 0256-2499

Sankaran, S. ; Subramanya Sarma, V. ; Padmanabhan, K. A. (2003) Low cycle fatigue behavior of a multiphase microalloyed medium carbon steel: comparison between ferrite–pearlite and quenched and tempered microstructures Materials Science and Engineering A, 345 (1-2). pp. 328-335. ISSN 0921-5093

Padmanabhan, K. A. (2003) From atomistics to macro-behavior: structural superplasticity in micro- and nano-crystalline materials International Journal of Materials Research, 94 . pp. 1046-1051. ISSN 1862-5282

Subramania Sarma, V. ; Padmanabhan, K. A. (2002) Load sequence effects in the high cyde fatigue of two ferrite-pearlite microalloyed steels International Journal of Materials Research, 93 . pp. 244-247. ISSN 1862-5282

Date, P. P. ; Padmanabhan, K. A. (2001) Comparison of fracture in sheets of low pressure gas (LPG) steel and aluminium alloys Journal of Materials Processing Technology, 114 (2). pp. 122-128. ISSN 0924-0136

Padmanabhan, K. A. (2001) Mechanical properties of nanostructured materials Materials Science and Engineering: A, 304-306 . pp. 200-205. ISSN 0921-5093

Date, P. P. ; Padmanabhan, K. A. (2001) Deformation behaviour of sheets of three aerospace Al-alloys Journal of Materials Processing Technology, 112 (1). pp. 68-77. ISSN 0924-0136

Vivek, Srivarsava ; Subramanya Sarma, Vadlamani ; Anantha Padmanabhan, Kuppusamy (2001) Influence of microstructure on the low and high cycle fatigue behaviour of a medium carbon microalloyed steel Zeitschrift für Metallkunde, 92 (12). pp. 1312-1318. ISSN 0044-3093

Betz, U. ; Padmanabhan, K. A. ; Hahn, H. (2001) Superplastic flow in nanocrystalline and sub-microcrystalline yttria-stabilized tetragonal zirconia Journal of Materials Science, 36 (24). pp. 5811-5821. ISSN 0022-2461

Padmanabhan, K. A. ; Daniel, B. S. S. (2001) Unified theory of deformation for structural superplastics, metallic glasses and nanocrystalline materials Materials Science Forum, 357-359 . pp. 371-380. ISSN 0255-5476

Subramanya Sarma, V. ; Padmanabhan, K. A. ; Jaeger, G. ; Koethe, A. ; Schaper, M. (2000) On the fatigue crack growth behaviour of two ferrite–pearlite microalloyed steels Materials Letters, 46 (4). pp. 185-188. ISSN 0167-577X

Sarma, V. S. ; Padmanabhan, K. A. ; Jaeger, G. ; Koethe, A. ; Schaper, M. (2000) On the fatigue thresholds and the fatigue crack growth behaviour of two ferrite-pearlite microalloyed steels Transactions of the Indian Institute of Metals, 53 (3). pp. 303-314. ISSN 0019-493X

Engler, O. ; Padmanabhan, K. A. ; Lücke, K. (2000) A model for superplastic flow induced texture annihilation Modelling and Simulation in Materials Science and Engineering, 8 (4). pp. 477-490. ISSN 0965-0393

Padmanabhan, K. A. (2000) Between Yes and No: some thoughts on basic research in an applied area Transactions of the Indian Institute of Metals (53). pp. 97-104. ISSN 0019-493X

Padmanabhan, K. A. (2000) Deformation of structural superplastics, nanostructured materials and metallic glasses: a unified approach Materials Science Forum, 343-346 (2). pp. 753-760. ISSN 0255-5476

Subramanya Sarma, V. ; Padmanabhan, K. A. ; Jaefer, G. ; Koethe, A. ; Schaper, M. (2000) On the fatigue threshold behaviour of two ferrite-pearlite microalloyed steels Zeitschrift für Metallkunde, 91 (7). pp. 581-584. ISSN 0044-3093

Singh, A. P. ; Padmanabhan, K. A. ; Pandey, G. N. ; Murty, G. M. D. ; Jha, S. (2000) Strength differential effect in four commercial steels Journal of Materials Science, 35 (6). pp. 1379-1388. ISSN 0022-2461

Enikeev, F. U. ; Padmanabhan, K. A. ; Bhattacharya, S. S. (1999) Model for grain boundary sliding and its relevance to optimal structural superplasticity Part 5 - A unique numerical solution and its reliability Materials Science and Technology, 15 (6). pp. 673-682. ISSN 0025-5416

Kanni Raj, A. ; Satish Kumar, J. ; Padmanabhan, K. A. (1999) Martensitic transformation and plastic flow in metastable 2.5 wt.% nickel austenitic stainless steel sheets Materials Letters, 38 (5). pp. 386-390. ISSN 0167-577X

Sarma, V. S. ; Padmanabhan, K. A. ; Gueth, K. A. ; Koethe, A. (1999) Low cycle fatigue behaviour of low carbon microalloyed steel: microstructural evolution and life assessment Materials Science and Technology, 15 (3). pp. 260-264. ISSN 0025-5416

Raj, A. K. ; Padmanabhan, K. A. (1998) Formability of metastable austenitic stainless steel sheets. I. Experimental Transactions of the Indian Institute of Metals, 51 (4). pp. 201-215. ISSN 0019-493X

Raj, A. K. ; Padmanabhan, K. A. (1998) Formability of metastable austenitic stainless steel sheets. II. Theoretical Transactions of the Indian Institute of Metals, 51 (4). pp. 217-222. ISSN 0019-493X

Subramanya, Sarma V. ; Sundararaman, M. ; Padmanabhan, K. A. (1998) Effect of γ' size on room temperature low cycle fatigue behaviour of a nickel base superalloy Materials Science and Technology, 14 (7). pp. 669-675. ISSN 0025-5416

Kanni Raj, A. ; Padmanabhan, K. A. (1998) Tensile properties and formability of low Ni (1.2 mass%Ni) metastable austenitic stainless steel sheets Materials Transactions, 39 (5). pp. 613-616. ISSN 1345-9678

Subramanya Sarma, V. ; Padmanabhan, K. A. (1997) Low cycle fatigue behaviour of a medium carbon microalloyed steel International Journal of Fatigue, 19 (2). pp. 135-140. ISSN 0142-1123

Cha, Sheng ; Nitsche, R. ; Padmanabhan, K. A. ; Hahn, H. (1997) On a pneumatically controlled tension/compression testing system Journal of Materials Science Letters, 16 (1). pp. 74-76. ISSN 0261-8028

Hahn, H. ; Mondal, P. ; Padmanabhan, K. A. (1997) Plastic deformation of nanocrystalline materials Nanostructured Materials, 9 (1-8). pp. 603-606. ISSN 0965-9773

Kanni Raj, A. ; Padmanabhan, K. A. (1997) Room-temperature plastic flow and strain-induced martensitic transformation in 1.2 wt % Ni metastable austenitic stainless steel sheets Journal of Materials Science Letters, 16 (23). pp. 1920-1924. ISSN 0261-8028

Padmanabhan, K. A. (1997) Towards a theory of cooperative deformation processes Materials Science Forum, 243-245 . pp. 1-10. ISSN 0255-5476

Bhattacharya, S. S. ; Padmanabhan, K. A. (1997) A mechanistic model for boundary sliding controlled optimal superplastic flow. III. Numerical verification Journal of Materials Processing and Manufacturing Science, 5 . pp. 225-240. ISSN 1062-0656

Hahn, H. ; Padmanabhan, K. A. (1997) A model for the deformation of nanocrystalline materials Philosophical Magazine Part B, 76 (4). pp. 559-571. ISSN 0141-8637

Venkatesh, T. A. ; Bhattacharya, S. S. ; Padmanabhan, K. A. ; Schlipf, J. (1996) Model for grain boundary sliding and its relevance to optimal structural superplasticity Materials Science and Technology, 12 (8). pp. 635-643. ISSN 0025-5416

Astanin, V. V. ; Padmanabhan, K. A. ; Bhattacharya, S. S. (1996) Model for grain boundary sliding and its relevance to optimal structural superplasticity Part 3 - effect of flow localisation and specimen thickness on superplasticity in alloy Supral 100 Materials Science and Technology, 12 (7). pp. 545-550. ISSN 0025-5416

Astanin, V. V. ; Faizova, S. N. ; Padmanabhan, K. A. (1996) Model for grain boundary sliding and its relevance to optimal structural superplasticity Part 2 - Evidence for cooperative grain/interphase boundary sliding and plane interface formation Materials Science and Technology, 12 (6). pp. 489-494. ISSN 0025-5416

Padmanabhan, K. A. ; Schlipf, J. (1996) Model for grain boundary sliding and its relevance to optimal structural superplasticity Part 1 - Theory Materials Science and Technology, 12 (5). pp. 391-399. ISSN 0025-5416

Ganesh Sundara Raman, S. ; Padmanabhan, K. A. (1996) Effect of prior cold work on the room-temperature low-cycle fatigue behaviour of AISI 304LN stainless steel International Journal of Fatigue, 18 (2). pp. 71-79. ISSN 0142-1123

Sridhar, B. R. ; Ramachandra, K. ; Padmanabhan, K. A. (1996) Effect of shot peening on the fatigue and fracture behaviour of two titanium alloys Journal of Materials Science, 31 (22). pp. 5953-5960. ISSN 0022-2461

Sridhar, B. R. ; Ramachandra, K. ; Padmanabhan, K. A. (1996) Effects of cyclic stressing, heat treatment and shot-peening pressure on the residual stress distribution in two titanium alloys Journal of Materials Science, 31 (16). pp. 4381-4385. ISSN 0022-2461

Bingzhe, B. ; Padmanabhan, K. A. (1996) Evolution of microstructure and homogeneity in superplastic deformation Materials Science Forum, 243-245 . pp. 191-196. ISSN 0255-5476

Bhattacharya, S. S. ; Padmanabhan, K. A. (1996) On the apparent activation energies for superplastic flow Materials Science Forum, 243-245 . pp. 65-70. ISSN 0255-5476

Padmanabhan, K. A. ; Engler, O. ; Lücke, K. (1996) On the effects of second phase distribution on the fracture behaviour of two superplastic aluminium alloys Journal of Materials Science, 31 (15). pp. 3971-3981. ISSN 0022-2461

Bhattacharya, S. S. ; Padmanabhan, K. A. (1996) On the numerical verification of a mechanistic model for superplastic flow Materials Science Forum, 243-245 . pp. 59-64. ISSN 0255-5476

Padmanabhan, K. A. ; Bhattacharya, S. S. ; Schlipf, J. (1995) A mechanistic model for boundary sliding controlled optimal superplastic flow. I. Theory Journal of Materials Processing & Manufacturing Science (USA), 4 (2). pp. 105-116. ISSN 1062-0656

Ganesh Sundara Raman, S. ; Padmanabhan, K. A. (1995) A comparison of the room-temperature behaviour of AISI 304LN stainless steel and Nimonic 90 under strain cycling International Journal of Fatigue, 17 (4). pp. 271-277. ISSN 0142-1123

Ganesh Sundara Raman, S. ; Padmanabhan, K. A. (1995) Effect of electropolishing on the room-temperature low-cycle fatigue behaviour of AISI 304LN stainless steel International Journal of Fatigue, 17 (3). pp. 179-182. ISSN 0142-1123

Hahn, H. ; Padmanabhan, K. A. (1995) Mechanical response of nanostructured materials Nanostructured Materials, 6 (1-4). pp. 191-200. ISSN 0965-9773

Ravi Sankar, B. ; Padmanabhan, K. A. (1995) On the hot pressing of YBa₂Cu₃O_7-x Journal of Materials Science Letters, 14 (24). pp. 1777-1780. ISSN 0261-8028

Bhattacharya, S. S. ; Satishnarayana, G. V. ; Padmanabhan, K. A. (1995) A generic analysis for high-temperature power-law deformation: the case of linear In (strain rate)-In(stress) relationship Journal of Materials Science, 30 (23). pp. 5850-5866. ISSN 0022-2461

Bhattacharya, S. S. ; Padmanabhan, K. A. (1995) A mechanistic model for boundary sliding controlled optimal superplastic flow. II. Experimental verification Journal of Materials Processing and Manufacturing Science (4). pp. 117-161. ISSN 1062-0656

Ganesh Sundara Raman, S. ; Padmanabhan, K. A. (1994) Some studies on the incremental step (fatigue) test Materials Science and Engineering: A, 188 (1-2). pp. 141-146. ISSN 0921-5093

Raman, Ganesh Sundara ; Padmanabhan, K. A. (1994) Influence of martensite formation and grain size on room temperature low cycle fatigue behaviour of AISI 304LN austenitic stainless steel Materials Science and Technology, 10 (7). pp. 614-620. ISSN 0025-5416

Ganesh Sundara Raman, S. ; Padmanabhan, K. A. (1994) Room-temperature low-cycle fatigue behaviour of a Ni-base superalloy International Journal of Fatigue, 16 (3). pp. 209-215. ISSN 0142-1123

Date, P. P. ; Padmanabhan, K. A. (1994) Deformation behaviour of hot rolled low carbon steel sheets: the effects of sheet thickness and modes of testing on formability Journal of Materials Science Letters, 13 (11). pp. 795-798. ISSN 0261-8028

Ganesh Sundara Raman, S. ; Padmanabhan, K. A. (1994) Effect of surface roughness on the room temperature low cycle fatigue life of alloy Nimonic 90 Journal of Materials Science Letters, 13 (10). pp. 708-710. ISSN 0261-8028

Bhattacaharya, S. S. ; Padmanabhan, K. A. (1994) On the experimental verification of an atomistic model for boundary sliding controlled optimal superplastic flow Materials Science Forum . pp. 95-100. ISSN 0255-5476

Padmanabhan, K. A. (1994) On the physical nature of optimal superplastic flow Materials Science Forum . pp. 59-64. ISSN 0255-5476

Bhattacharya, S. S. ; Padmanabhan, K. A. (1994) Phenomenological and mechanistic approaches to optimal structural superplasticity Key Engineering Materials, 97-98 . pp. 141-150. ISSN 1013-9826

Date, P. P. ; Padmanabhan, K. A. (1993) On the deformation and fracture behaviour of low-pressure gas (LPG) grade steel and two aluminium alloys Journal of Materials Processing Technology, 39 (1-2). pp. 153-164. ISSN 0924-0136

Date, P. P. ; Padmanabhan, K. A. (1992) On the formability of 3.15 mm thick low-carbon steel sheets Journal of Materials Processing Technology, 35 (2). pp. 165-181. ISSN 0924-0136

Danesh Sundara Raman, S. ; Padmanabhan, K. A. (1992) Determination of the room-temperature cyclic stress-strain curve of AISI 304LN austenitic stainless steel by two different methods International Journal of Fatigue, 14 (5). pp. 295-304. ISSN 0142-1123

Venkadesan, S. ; Rodriguez, P. ; Padmanabhan, K. A. ; Sivaprasad, P. V. ; Phaniraj, C. (1992) Flow transients during strain rate jump tests in a titanium-modified austenitic stainless steel Materials Science and Engineering A, 154 (1). pp. 69-74. ISSN 0921-5093

Date, P. P. ; Padmanabhan, K. A. (1992) On the prediction of the forming-limit diagram of sheet metals International Journal of Mechanical Sciences, 34 (5). pp. 363-374. ISSN 0020-7403

Venkadesan, S. ; Bhaduri, A. K. ; Rodriguez, P. ; Padmanabhan, K. A. (1992) Effect of ageing on the microstructural stability of cold-worked titanium-modified 15Cr-15Ni-2.5Mo austenitic stainless steel Journal of Nuclear Materials, 186 (2). pp. 177-184. ISSN 0022-3115

Sridhar, B. R. ; Nafde, W. G. ; Padmanabhan, K. A. (1992) Effect of shot peening on the residual stress distribution in two commercial titanium alloys Journal of Materials Science, 27 (21). pp. 5783-5788. ISSN 0022-2461

Padmanabhan, K. A. (1992) Role of interfaces in superplastic flow Proceedings of the Indo-US Workshop (1989) on `Interfaces: Structure and Properties . pp. 233-243.

Swaminathan, K. ; Date, P. P. ; Padmanabhan, K. A. (1991) Room Temperature formability and fracture behavior of a high strength Al-Zn-Mg alloy Journal of Engineering Materials and Technology, 113 (2). pp. 236-243. ISSN 0094-4289

Singh, A. P. ; Padmanabhan, K. A. (1991) Axi-symmetric compression of solid cylinders: Part I. Slow loading conditions Journal of Materials Science, 26 (20). pp. 5481-5487. ISSN 0022-2461

Singh, A. P. ; Padmanabhan, K. A. (1991) Axi-symmetric compression of solid cylinders: Part II. Rapid loading conditions Journal of Materials Science, 26 (20). pp. 5488-5494. ISSN 0022-2461

Padmanabhan, K. A. ; Hirsch, J. ; Lücke, K. (1991) Evaluation of mechanical properties for fundamental studies in structural superplasticity Journal of Materials Science, 26 (19). pp. 5301-5308. ISSN 0022-2461

Swaminathan, K. ; Padmanabhan, A. (1991) Some investigations on the forming behaviour of an extra deep drawing low carbon steel. II. Comparison with theoretical evaluation Transactions of the Indian Institute of Metals, 44 . pp. 249-253. ISSN 0019-493X

Swaminathan, Krishnamurti ; Padmanabhan, K. A. (1991) Some investigations on the forming behaviour of an indigenous extra-deep drawing low carbon steel: I. Experimental results Transactions of the Indian Institute of Metals, 44 (3). pp. 231-247. ISSN 0019-493X

Padmanabhan, K. A. ; Hirsch, J. ; Lücke, K. (1991) Superplasticity-dislocation creep interactions in a coarse grained Al-Cu-Zr alloy Journal of Materials Science, 26 (19). pp. 5309-5317. ISSN 0022-2461

Viswanathan, D. ; Venkatasamy, S. ; Padmanabhan, K. A. (1990) Macro-, micro-and re-entrant shape forming of sheets of alloy Ti-6A1-4V Journal of Materials Processing Technology, 24 ( ). pp. 213-223. ISSN 0924-0136

Theodore, N. D. ; Padmanabhan, K. A. (1990) Numerical optimisation of superplastic deformation Journal of Materials Science, 25 (4). pp. 2133-2143. ISSN 0022-2461

Swaminathan, K. ; Padmanabhan, K. A. (1990) Tensile flow and fracture behaviour of a superplastic Al-Ca-Zn alloy Journal of Materials Science, 25 (11). pp. 4579-4586. ISSN 0022-2461

Swaminathan, K. ; Padmanabhan, K. A. (1990) The formability and fracture behaviour of an extra-deep drawing steel and two aluminium-based alloys Indian Journal of Technology, 28 (12). pp. 681-690. ISSN 0019-5669

Khatak, H. S. ; Muraleedharan, P. ; Gnanamoorthy, J. B. ; Rodriguez, P. ; Padmanabhan, K. A. (1989) Evaluation of the stress corrosion resistance of cold rolled aisi type 316 stainless steel using constant load and slow strain rate tests Journal of Nuclear Materials, 168 (1-2). pp. 157-161. ISSN 0022-3115

Swaminathan, K. ; Padmanabhan, K. A. (1989) On the correlation between the stress state of deformation and fracture behaviour in an extra-deep drawing low carbon steel Metals Materials and Processes, 1 (1). pp. 49-56. ISSN 0970-423X

Swaminathan, K. ; Padmanabhan, K. A. ; Basu, R. K. (1989) On the correlation between annealing textures and formability in an extra-deep drawing low-carbon steel Journal of Materials Science Letters, 8 (5). pp. 595-598. ISSN 0261-8028

Varadaraju, U. V. ; Subba Rao, G. V. ; Chandrasekaran, K. D. ; Baradarajan, A. ; Krishnaiah, K. ; Agarwala, Mukesh ; Achutharaman, V. S. ; Venugopal, P. ; Padmanabhan, K. A. ; Vaidyanathan, L. S. ; Rangarajan, G. (1989) Oxygen-enrichment of YBa₂Cu₃O_7-δ using the fluidization technique Bulletin of Materials Science, 12 (1). pp. 63-80. ISSN 0250-4707

Wolf, H. ; Padmanabhan, K. A. ; Blum, W. (1989) Life assessment and prediction based on an analysis of creep deformation Proceedings of International Conference on Residual Life of Power Plant Equipment: Prediction and Extension . 5B.2.1-5B.2.9.

Bhattacharya, S. S. ; Padmanabhan, K. A. (1989) Similarities and differences in the approaches to structural superplasticity and high temperature creep Transactions of the Indian Institute of Metals, 42 . S123-S137. ISSN 0019-493X

Padmanabhan, K. A. ; Venugopal, P. (1988) Explosive compaction of YBa₂Cu₃O_7-δ superconducting powders-a preliminary report High Temperature Superconductors, Newsletter, 1 (5). pp. 8-9. ISSN 0953-1262

Venugopal, P. ; Venkatraman, S. ; Vasudevan, R. ; Padmanabhan, K. A. (1988) On the properties and economics of sintered iron powder metallurgical extrudes Journal of Mechanical Working Technology, 16 (3). pp. 231-242. ISSN 0378-3804

Venugopal, P. ; Venkatraman, S. ; Vasudevan, R. ; Padmanabhan, K. A. (1988) Some failure studies in the Hooker extrusion of sintered iron powder metallurgical preforms Journal of Mechanical Working Technology, 16 (2). pp. 165-174. ISSN 0378-3804

Venkadesan, S. ; Padmanabhan, K. A. (1988) On the warm rolling of type 316 austenitic stainless steel Zeitschrift für Metallkunde, 79 (3). pp. 174-179. ISSN 0044-3093

Venugopal, P. ; Venkatraman, S. ; Vasudevan, R. ; Padmanabhan, K. A. (1988) Ring-compression tests on sintered iron preforms Journal of Mechanical Working Technology, 16 (1). pp. 51-64. ISSN 0378-3804

Date, P. P. ; Swaminathan, K. ; Padmanabhan, K. A. (1988) Room-temperature forming limit diagram and tensile behaviour up to 200°C of an AI-Ca-Zn superplastic alloy Journal of Materials Science, 23 (4). pp. 1351-1359. ISSN 0022-2461

Venugopal, P. ; Venkatraman, S. ; Vasudevan, R. ; Padmanabhan, K. A. (1987) Force and energy during the cold hooker extrusion of sintered iron preforms Journal of Mechanical Working Technology, 15 (3). pp. 357-374. ISSN 0378-3804

Hammad, Abdel Hady Mohamed ; Padmanabhan, Kuppuswamy Anantha ; Van Tendelo, Gustaaf ; Anantharaman, Tanjore Ramachandra (1987) Deformation of Al-2 wt.% Ge and Al-4 wt.% Ge alloys in the presence of precipitation of varying amounts Zeitschrift für Metallkunde, 78 . pp. 103-112. ISSN 0044-3093

Hammad, Abdel Hady Mohamed ; Padmanabhan, Kuppuswamy Anantha ; Van Tendeloo, Gustaaf ; Anantharaman, Tanjore Ramachandra (1987) Deformation of Al-Si and Al-Fe high purity alloys in the presence of precipitation of varying amounts Zeitschrift für Metallkunde, 78 . pp. 113-120. ISSN 0044-3093

Khatak, H. S. ; Gnanamoorthy, J. B. ; Padmanabhan, K. A. ; Rodriguez, P. (1987) Evaluation of susceptibility to stress corrosion cracking (SCC) in sodium chloride solution of weldments of cold rolled type 316 stainless steel Key Engineering Materials, 3 . pp. 2249-2254. ISSN 1013-9826

Gill, T. P. S. ; Gnanamoorthy, J. B. ; Padmanabhan, K. A. (1987) Influence of secondary phases on the localized corrosion of thermally aged AISI 316L stainless steel weld metal Corrosion, 43 (4). pp. 208-213. ISSN 0010-9312

Venkadesan, S. ; Seetharaman, V. ; Padmanabhan, K. A. (1986) Warm working of austenitic stainless steel Proceedings of National Seminar on Stainless Steels in the Eighties . pp. 51-56.

Kuppusamyanantha, Padmanabhan ; Kurt, Luecke (1986) An assessment of the role of texture in structurally superplastic flow Zeitschrift fuer Metallkunde, 77 . pp. 765-770. ISSN 0044-3093

Samuel, K. G. ; Rodrigues, P. ; Padmanabhan, K. A. (1986) Influence of ageing in the sensitization temperature range on the microstructure and room temperature tensile properties of a type 316 stainless steel Transactions of the Indian Institute of Metals, 39 (5). pp. 421-425. ISSN 0019-493X

Guha, B. ; Balasubramanian, S. ; Padmanabhan, K. A. (1986) Some aspects of fatigue crack growth in weldments in the near- threshold regime Proceedings of International Conference on `Measurement and Fatigue - EIS `86' . pp. 287-299.

Chockalingam, K. S. K. ; Neelakantan, M ; Devaraj, S. ; Padmanabhan, K. A. (1985) On the pressure forming of two superplastic alloys Journal of Materials Science , 20 (4). pp. 1310-1320. ISSN 0022-2461

Singh, A. P. ; Venkadesan, S. ; Padmanabhan, K. A. (1983) Strain-temperature correlations obtained in rolling Materials Science and Engineering, 58 (2). pp. 223-227. ISSN 0025-5416

Yadava, R. K. ; Padmanabhan, K. A. (1982) Fracture of a tin-lead eutectic alloy in region III of superplastic flow Journal of Materials Science, 17 (8). pp. 2435-2440. ISSN 0022-2461

Padmanabhan, K. A. (1982) Interpretation of in-situ HVEM studies of superplasticity Scripta Materialia, 16 . p. 1199. ISSN 1359-6462

Singh, A. P. ; Padmanabhan, K. A. (1982) Surface contours in the axi-symmetric upsetting of solid cylinders Journal of Materials Science, 17 (3). pp. 821-831. ISSN 0022-2461

Singh, A. P. ; Padmanabhan, K. A. (1981) Strain-temperature correlations obtained on the application of axisymmetric compressive stresses Materials Science and Engineering, 51 (2). pp. 137-146. ISSN 0025-5416

Padmanabhan , K. A. (1981) On the evaluation of the activation energy for superplastic flow Journal of Materials Science, 16 (2). pp. 531-533. ISSN 0022-2461

Padmanabhan, K. A. (1980) Metallographic evidence for superplastic flow Metal Science, 14 (10). pp. 506-508. ISSN 0306-3453

Hammad, A. M. ; Padmanabhan, K. A. ; Anantharaman, T. R. (1980) On the possible mechanism(s) of fracture in commercial aluminium Journal of Materials Science, 15 (8). pp. 2136-2139. ISSN 0022-2461

Padmanabhan, K. A. (1977) A theory of structural superplasticity Materials Science and Engineering, 29 (1). pp. 1-18. ISSN 0025-5416

Padmanabhan, K. A. ; Davies, G. J. (1977) The superplastic behaviour of the Al-CuAl₂ eutectic during compressive deformation Metal Science, 11 (5). pp. 177-184. ISSN 0306-3453

Hammad, A. M. ; Padmanabhan, K. A. ; Van Tendeloo, G. ; Anantharaman, T. R. (1977) Deformation of commercial aluminium in the temperature range 300-700 K. II. Electron microscopy Transactions of the Indian Institute of Metals, 30 . pp. 338-342. ISSN 0019-493X

Hammad, A. M. ; Padmanabhan, K. A. ; Anantharaman, T. R. (1977) Deformation of commercial aluminium in the temperature range 300-700K. I. Flow characteristics Transactions of the Indian Institute of Metals, 30 . pp. 327-337. ISSN 0019-493X

Padmanabhan, K. A. ; Moles, M. D. C. ; Davies, G. J. (1977) Non-unique stress-strain-rate relations during superplastic flow Journal of Materials Science, 12 (3). pp. 632-635. ISSN 0022-2461

Padmanabhan, G. ; Padmanabhan, K. A. (1976) Superplasticity as an Arrhenius rate process Philosophical Magazine, 33 (2). pp. 371-374. ISSN 1478-6435

Maulik, P. ; Padmanabhan, K. A. (1975) Variations in activation energy for superplastic flow Journal of Materials Science, 10 (9). pp. 1646-1649. ISSN 0022-2461

Padmanabhan, K. A. (1974) Generalisation of activation energy and viscosity relations for superplastic flow Physica Status Solidi A, 22 (1). K95-K98. ISSN 0031-8965

Padmanabhan, K. A. ; Davies, G. J. (1974) Rheological analysis of superplasticity in metallic materials Rheologica Acta, 13 (3). pp. 434-442. ISSN 0035-4511

Padmanabhan, K. A. ; Davies, G. J. (1973) On the activation energy for superplastic flow Physica Status Solidi A, 18 (1). pp. 295-302. ISSN 0031-8965

Padmanabhan, K. A. (1973) On the nature of the stress function for thermally activated flow Scripta Metallurgica, 7 (2). pp. 137-144. ISSN 0036-9748

Padmanabhan, K. A. ; Davies, G. J. (1970) Numerical analysis of superplasticity data for use in metal forming applications Journal of the Mechanics and Physics of Solids, 18 (4). pp. 261-275. ISSN 0022-5096

Davies, G. J. ; Edington, J. W. ; Cutler, C. P. ; Padmanabhan, K. A. (1970) Superplasticity: a review Journal of Materials Science, 5 (12). pp. 1091-1102. ISSN 0022-2461