Browse by Fellow

Varghese, Johny ; Rajulapati, Koteswararao V. ; Rao, K. Bhanu Sankara ; Akash, N. Chavan ; Meshram, S. D. ; Reddy, G. Madhusudhan (2022) Characterization of Microstructure and Mechanical Properties of Friction Stir Welded Reduced Activation Ferritic–Martensitic Steel in As-Received, As-Welded and Post-weld Heat-Treated States Transactions of the Indian Institute of Metals, 75 (10). pp. 2581-2594. ISSN 0972-2815

Ramakrishna, R.V.S.M. ; Bhanu Sankara Rao, K. ; Madhusudhan Reddy, G. ; Gautam, Jai Prakash (2021) Microstructure and mechanical property evolution of post weld heat treated bainitic steel welds Materials Today: Proceedings, 44 . pp. 2919-2925. ISSN 2214-7853

Kalali, Deekshith G. ; Antharam, Sairam ; Hasan, Mohsin ; Karthik, P. Sai ; Phani, P. Sudharshan ; Bhanu Sankara Rao, K. ; Rajulapati, Koteswararao V. (2021) On the origins of ultra-high hardness and strain gradient plasticity in multi-phase nanocrystalline MoNbTaTiW based refractory high-entropy alloy Materials Science and Engineering A, 812 . p. 141098. ISSN 0921-5093

Jadav, Jhansi ; Rajulapati, K. V. ; Rao, K. Bhanu Sankara ; Prasad, N. Eswara ; Mythili, R. ; Prasad, Kartik (2020) Comprehensive Assessment of Low Cycle Fatigue Behavior of Nickel-Base Superalloy Superni 263 in the Range 298–1023 K Transactions of the Indian National Academy of Engineering, 5 (3). pp. 555-571. ISSN 2662-5415

Ganji, Ramya Sree ; Rajulapati, Koteswararao V. ; Rao, K. Bhanu Sankara (2020) Development of a Multi-phase AlCuTaVW High-Entropy Alloy Using Powder Metallurgy Route and its Mechanical Properties Transactions of the Indian Institute of Metals, 73 (3). pp. 613-618. ISSN 0972-2815

Patibanda, Supriya ; Varam, Sreedevi ; Gollapudi, Srikant ; Rao, K. Bhanu Sankara ; Rajulapati, Koteswararao V. (2020) On the Hardness and Strain Rate Sensitivity of Electrodeposited Nanocrystalline Ni–18 wt% Co Alloy Studied by Nanoindentation Transactions of the Indian Institute of Metals, 73 (2). pp. 457-464. ISSN 0972-2815

Yella, Pardhu ; Rajulapati, K.V. ; Prasad Reddy, G.V. ; Sandhya, R. ; Prem Kiran, P. ; Buddu, Ramesh K. ; Bhanu Sankara Rao, K. (2019) Effect of laser shock peening on high cycle fatigue characteristics of 316LN stainless steel International Journal of Pressure Vessels and Piping, 176 . p. 103972. ISSN 0308-0161

Jadav, Jhansi ; Rajulapati, K. V. ; Bhanu Sankara Rao, K. ; Eswara Prasad, N. (2019) Effects of Strain Rate and Temperature on Tensile Properties, Deformation and Dynamic Strain Ageing Behavior of Ni-Base Superalloy Superni 263 INAE Letters, 4 (4). pp. 241-250. ISSN 2366-326X

Yella, Pardhu ; Varghese, J. ; Prem Kiran, P. ; Buddu, R. K. ; Bhanu Sankara Rao, K. ; Rajulapati, Koteswararao V. (2019) Mechanical Properties of Laser Shock-Peened Regions of SS316LN and SS304 Studied by Nanoindentation INAE Letters, 4 (4). pp. 215-225. ISSN 2366-326X

Abhijit, A. ; Varghese, J. ; Chalavadi, P. ; Sai Karthik, P. ; Bhanu Sankara Rao, K. ; Rajulapati, K. V. (2019) Negative Strain Rate Sensitivity in Two-Phase Nanocrystalline CoCrFeMnNi High-Entropy Alloy with Broader Grain Size Distribution Studied by Nanoindentation Transactions of the Indian Institute of Metals, 72 (10). pp. 2861-2867. ISSN 0972-2815

Jadav, J. ; Rajulapati, K.V. ; Rao, K. Bhanu Sankara ; Prasad, N. Eswara ; Mythili, R. ; Prasad, Kartik (2019) Strain controlled isothermal low cycle fatigue life, deformation and fracture characteristics of Superni 263 superalloy Materials Science and Engineering A, 760 . pp. 296-315. ISSN 0921-5093

Jadav, Jhansi ; Rajulapati, Koteswara Rao. V. ; Eswaraprasad, N. ; Bhanu Sankara Rao, K. (2018) Effect of Temperature on Tensile flow behaviour of Nimonic C-263 alloy Materials Today: Proceedings, 5 (2). pp. 5475-5480. ISSN 2214-7853

Manugula, Vijaya L. ; Rajulapati, Koteswararao V. ; Reddy, G. Madhusudhan ; Rajendra Kumar, E. ; Rao, K. Bhanu Sankara (2018) Friction stir welding of thick section reduced activation ferritic–martensitic steel Science and Technology of Welding & Joining, 23 (8). pp. 666-676. ISSN 1362-1718

Yella, Pardhu ; Venkateswarlu, P. ; Buddu, Ramesh K. ; Vidyasagar, D.V. ; Sankara Rao, K. Bhanu ; Kiran, P. Prem ; Rajulapati, Koteswararao V. (2018) Laser shock peening studies on SS316LN plate with various sacrificial layers Applied Surface Science, 435 . pp. 271-280. ISSN 0169-4332

Yella, P. ; Venkateswarlu, P. ; Buddu, R.K. ; Ravi, N. ; Rao, K. Bhanu Sankara ; Kiran, P. Prem ; Rajulapati, Koteswararao V. (2018) Role of sacrificial layers on surface characteristics of laser shock peened SS304 plates Optics & Laser Technology, 107 . pp. 142-149. ISSN 0030-3992

Prasad, Kartik ; Kumar, Vikas ; Rao, Kota Bhanu Sankara ; Sundararaman, Mahadevan (2017) Effects of silicon on characteristics of dynamic strain aging in a near-α titanium alloy International Journal of Materials Research, 108 (4). pp. 275-285. ISSN 1862-5282

Manugula, Vijaya L. ; Rajulapati, Koteswararao V. ; Reddy, G. Madhusudhan ; Rao, K. Bhanu Sankara (2017) Role of evolving microstructure on the mechanical properties of electron beam welded ferritic-martensitic steel in the as-welded and post weld heat-treated states Materials Science and Engineering A, 698 . pp. 36-45. ISSN 0921-5093

Ganji, Ramya Sree ; Sai Karthik, P. ; Bhanu Sankara Rao, K. ; Rajulapati, Koteswararao V. (2017) Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro- and nanoindentation methods Acta Materialia, 125 . pp. 58-68. ISSN 1359-6454

Rahul, R. ; Rajulapati, K. V. ; Reddy, G. M. ; Mohandas, T. ; Bhanu Sankara Rao, K. (2017) Studies on Effect of Parent Metal Condition on the Room Temperature Mechanical Properties of Ti6Al4V Friction Welds Transactions of the Indian Institute of Metals, 70 (9). pp. 2277-2291. ISSN 0972-2815

Prasad, Kartik ; Sarkar, Rajdeep ; Rao, K. Bhanu Sankara ; Sundararaman, M. (2016) A Critical Assessment of Cyclic Softening and Hardening Behavior in a Near-α Titanium Alloy During Thermomechanical Fatigue Metallurgical and Materials Transactions A, 47 (10). pp. 4904-4921. ISSN 1073-5623

Nagini, M. ; Vijay, R. ; Rajulapati, Koteswararao V. ; Rao, K. Bhanu Sankara ; Ramakrishna, M. ; Reddy, A. V. ; Sundararajan, G. (2016) Effect of Process Parameters on Microstructure and Hardness of Oxide Dispersion Strengthened 18Cr Ferritic Steel Metallurgical and Materials Transactions A, 47 (8). pp. 4197-4209. ISSN 1073-5623

Jana, Biswanath ; Rajulapati, KV ; Prasad, N Eswara ; Jain, RK ; Rao, K Bhanu Sankara (2016) Effect of carbon fabric type on properties of 2D carbon–carbon composites processed by liquid pitch impregnation–pyrolysis Journal of Composite Materials, 50 (23). pp. 3239-3254. ISSN 0021-9983

Prasad, Kartik ; Kumar, Vikas ; Bhanu Sankara Rao, K. ; Sundararaman, M. (2016) Effects of Crack Closure and Cyclic Deformation on Thermomechanical Fatigue Crack Growth of a Near α Titanium Alloy Metallurgical and Materials Transactions A, 47 (7). pp. 3713-3730. ISSN 1073-5623

Prasad, Kartik ; Sarkar, Rajdeep ; Kumar, Vikas ; Rao, K. Bhanu Sankara ; Sundararaman, M. (2016) Influence of test temperature on cyclic deformation behavior of a near α titanium alloy Materials Science and Engineering A, 662 . pp. 373-384. ISSN 0921-5093

Varam, Sreedevi ; Prasad, Muvva D. ; Rao, K. Bhanu Sankara ; Rajulapati, Koteswararao V. (2016) Mechanical properties of in situ consolidated nanocrystalline multi-phase Al–Pb–W alloy studied by nanoindentation Philosophical Magazine, 96 (35). pp. 3671-3685. ISSN 1478-6435

Prasad, Kartik ; Kumar, Vikas ; Rao, K. Bhanu Sankara ; Sundararaman, M. (2016) A comparative assessment of crack closure mechanisms in Timetal 834 near α titanium alloy under isothermal and thermomechanical fatigue loading Journal of Alloys and Compounds, 688 . pp. 8-11. ISSN 0925-8388

Manugula, Vijaya L. ; Rajulapati, Koteswararao V. ; Madhusudhan Reddy, G. ; Mythili, R. ; Bhanu Sankara Rao, K. (2016) A critical assessment of the microstructure and mechanical properties of friction stir welded reduced activation ferritic–martensitic steel Materials & Design, 92 . pp. 200-212. ISSN 0264-1275

Prasad Reddy, G.V. ; Kannan, R. ; Mariappan, K. ; Sandhya, R. ; Sankaran, S. ; Bhanu Sankara Rao, K. (2015) Effect of strain rate on low cycle fatigue of 316LN stainless steel with varying nitrogen content: Part-I cyclic deformation behavior International Journal of Fatigue, 81 . pp. 299-308. ISSN 0142-1123

Prasad, Kartik ; Karamched, Phani S. ; Bhattacharjee, A. ; Kumar, Vikas ; Bhanu Sankara Rao, K. ; Sundararaman, M. (2015) Electron back scattered diffraction characterization of thermomechanical fatigue crack propagation of a near α titanium alloy Timetal 834 Materials & Design, 65 . pp. 297-311. ISSN 0261-3069

Prasad, Kartik ; Amrithapandian, S. ; Panigrahi, B.K. ; Kumar, Vikas ; Bhanu Sankara Rao, K. ; Sundararaman, M. (2015) Experimental evidence for segregation of interstitial impurities to defects in a near α titanium alloy during dynamic strain aging using energy filtered transmission electron microscopy Materials Science and Engineering A, 638 . pp. 90-96. ISSN 0921-5093

Prasad Reddy, G. V. ; Nagesha, A. ; Sandhya, R. ; Sankaran, S. ; Mathew, M. D. ; Bhanu Sankara Rao, K. (2015) Thermomechanical and Isothermal Fatigue Behavior of 316LN Stainless Steel with Varying Nitrogen Content Metallurgical and Materials Transactions A, 46 (2). pp. 695-707. ISSN 1073-5623

Prasad Reddy, G. V. ; Nagesha, A. ; Sandhya, R. ; Sankaran, S. ; Mathew, M. D. ; Bhanu Sankara Rao, K. (2015) Thermomechanical and Isothermal Fatigue Behavior of 316LN Stainless Steel with Varying Nitrogen Content Metallurgical and Materials Transactions A, 46 (2). pp. 695-707. ISSN 1073-5623

Yagati, Krishna P. ; Bathe, Ravi N. ; Rajulapati, Koteswararao V. ; Sankara Rao, K. Bhanu ; Padmanabham, G. (2014) Fluxless arc weld-brazing of aluminium alloy to steel Journal of Materials Processing Technology, 214 (12). pp. 2949-2959. ISSN 0924-0136

Varam, Sreedevi ; Rajulapati, Koteswararao V. ; Bhanu Sankara Rao, K. ; Scattergood, Ronald O. ; Murty, Korukonda L. ; Koch, Carl C. (2014) Loading Rate-Dependent Mechanical Properties of Bulk Two-Phase Nanocrystalline Al-Pb Alloys Studied by Nanoindentation Metallurgical and Materials Transactions A, 45 (11). pp. 5249-5258. ISSN 1073-5623

Varam, Sreedevi ; Rajulapati, Koteswararao V. ; Bhanu Sankara Rao, K. (2014) Strain rate sensitivity studies on bulk nanocrystalline aluminium by nanoindentation Journal of Alloys and Compounds, 585 . pp. 795-799. ISSN 0925-8388

Prasad, Kartik ; Abhaya, S. ; Amarendra, G. ; Kumar, Vikas ; Rajulapati, K.V. ; Bhanu Sankara Rao, K. (2013) Fatigue crack growth behaviour of a near α titanium alloy Timetal 834 at 450°C and 600°C Engineering Fracture Mechanics, 102 . pp. 194-206. ISSN 0013-7944

Nagesha, A. ; Kannan, R. ; Sandhya, R. ; Sastry, G.V.S. ; Mathew, M.D. ; Rao, K. Bhanu Sankara ; Singh, Vakil (2013) Thermomechanical Fatigue Behaviour of a Modified 9Cr-1Mo Ferritic-Martensitic Steel Procedia Engineering, 55 . pp. 199-203. ISSN 1877-7058

Ganesan, V. ; Kannan, R. ; Mariappan, K. ; Sukumaran, G. ; Sandhya, R. ; Rao, K. Bhanu Sankara (2012) Evaluation of the Effect of Dynamic Sodium on the Low Cycle Fatigue Properties of 316L(N) Stainless Steel Base and Weld Joints High Temperature Materials and Processes, 31 (3). ISSN 0334-6455

Nagesha, A. ; Kannan, R. ; Sastry, G.V.S. ; Sandhya, R. ; Singh, Vakil ; Bhanu Sankara Rao, K. ; Mathew, M.D. (2012) Isothermal and thermomechanical fatigue studies on a modified 9Cr–1Mo ferritic martensitic steel Materials Science and Engineering A, 554 . pp. 95-104. ISSN 0921-5093

Kannan, R. ; Ganesan, V. ; Mariappan, K. ; Sukumaran, G. ; Sandhya, R. ; Mathew, M.D. ; Bhanu Sankara Rao, K. (2011) Influence of dynamic sodium environment on the creep–fatigue behaviour of Modified 9Cr–1Mo ferritic–martensitic steel Nuclear Engineering and Design, 241 (8). pp. 2807-2812. ISSN 0029-5493

Mathew, M.D. ; Vanaja, J. ; Laha, K. ; Varaprasad Reddy, G. ; Chandravathi, K.S. ; Bhanu Sankara Rao, K. (2011) Tensile and creep properties of reduced activation ferritic–martensitic steel for fusion energy application Journal of Nuclear Materials, 417 (1-3). pp. 77-80. ISSN 0022-3115

Shanmugavel, M. ; Nandagopal, M. ; Sandhya, R. ; Bhanu Sankara Rao, K. ; Gnanamoorthy, R. (2008) Evaluation of activation energy for dynamic strain aging process in 316L(N)/316(N) SS weld joints Transactions of the Indian Institute of Metals, 61 (4). pp. 301-306. ISSN 0972-2815

Sasikala, G. ; Mannan, S. L. ; Mathew, M. D. ; Rao, K. Bhanu (2000) Creep deformation and fracture behavior of types 316 and 316L(N) stainless steels and their weld metals Metallurgical and Materials Transactions A, 31 (4). pp. 1175-1185. ISSN 1073-5623