Intermetallic diffusion coatings for enhanced hot-salt oxidation resistance of nitrogen-containing austenitic stainless steels

Abstract

This article presents the preparation, characterization, and hot-salt oxidation behavior of nitrogen-containing type 316L stainless steel (SS), surface modified with intermetallic coatings. Three different types of intermetallic coating systems, containing aluminum, titanium, and titanium/aluminum multilayers, were formed by diffusion annealing of type 316L austenitic SS containing 0.015, 0.1, 0.2, and 0.56 pct nitrogen. Analysis by using X-ray diffraction (XRD), scanning electron microscopy (SEM), and secondary ion mass spectroscopy (SIMS) confirmed the formation of various intermetallic phases such as AIN, Al₁₃Fe₄, FeAl₂, FeTi, Ti₂N, and Ti₃Al in the coatings. Hot salt oxidation behavior of the uncoated and surface-modified stainless steels was assessed by periodic monitoring of the weight changes of NaCl salt-applied alloys kept in an air furnace at 1023 K up to 250 hours. The oxide scales formed were examined by XRD and stereomicroscopy. Among the various surface modifications investigated in the present study, the results indicate that the titanium-modified alloys show the best hot-salt oxidation resistance with the formation of an adherent, protective, thin, and continuous oxide layer. Among the four N-containing alloys investigated, the titanium and Ti/Al multilayer modified 0.56 pct N alloy showed the best hot-salt oxidation resistance as compared to uncoated alloys. The slower corrosion kinetics and adherent scale morphology indicate that the surface-modified titanium intermetallic coatings could provide high-temperature service applications up to 1073 K, particularly in chloride containing atmospheres, for austenitic stainless steels.