Sivaprasad, P. V. ; Venugopal, S. ; Venugopal, Sridhar ; Maduraimuthu, V. ; Vasudevan, M. ; Mannan, S. L. ; Prasad, Y. V. R. K. ; Chaturvedi, R. C. (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests Journal of Materials Processing Technology, 132 (1-3). pp. 262-268. ISSN 0924-0136
Full text not available from this repository.
Official URL: http://linkinghub.elsevier.com/retrieve/pii/S09240...
Related URL: http://dx.doi.org/10.1016/S0924-0136(02)00938-X
Abstract
The processing maps are being developed for use in optimising hot workability and controlling the microstructure of the product. The present investigation deals with the examination to assess the prediction of the processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using forging and rolling tests at different temperatures in the range of 600–1200°C. The tensile properties of these deformed products were evaluated at room temperature. The influence of the processing conditions, i.e. strain rate and temperature on the tensile properties of the deformed product were analysed to identify the optimum processing parameters. The results have shown good agreement between the regimes exhibited by the map and the properties of the rolled or forged product. The optimum parameters for processing of this steel were identified as rolling or press forging at temperatures above 1050°C to obtain optimum product properties.
| Item Type: | Article |
|---|---|
| Source: | Copyright of this article belongs to Elsevier Science. |
| Keywords: | Processing Maps; Austenitic Stainless Steel; Hot Forging; Rolling |
| ID Code: | 37878 |
| Deposited On: | 30 Apr 2011 08:25 |
| Last Modified: | 30 Apr 2011 08:25 |
Repository Staff Only: item control page
