Application and efficiency of scintillation autoradiography for Drosophila polytene chromosomes

Abstract

A rapid method of autoradiography using the scintillation cocktail (Toluene and scintillation fluid, Omnifluor) has been described earlier. Its application and efficiency have been tested using both ³H-thymidine and ³H-uridine. The optimum time required for processing the autoradiograms has been found to be 24 h dry exposure followed by 48 h in the scintillation mixture. Detailed analysis of the autoradiograms with ³H-uridine reveals that with the rapid method the 100% level of labelling index is reached by 48 h while with the conventional method the same level is reached by 10 to 12 days of dry exposure. The maximum grain density is reached by 16 to 17 days by the conventional method. While by the rapid method, the maximum grain density is approximately 80% of the control, this grain density is reached by 48 h (plus 24 h of dry exposure) and thereafter forms a plateau. With Toluene alone the grain density never exceeds 20%. The background is also relatively low and less variable in the O-T-processed autoradiograms, as compared to the two controls. These results support that the scintillation fluid plays the key role in augmenting the labelling. Furthermore, although the maximum grain density by the rapid technique is 80% of the control, the grain density obtained by the rapid method gives less coincidence and superimposition of grains. On the other hand, with ³H-thymidine, although all labelling patterns could be resolved, the labelling index (i.e., percent of labelled cells) is about 40% at 48 h (plus 24 h) and about 79.5% at 96 h with the rapid method, as compared to about 30% and 44% with the conventional method at the two time points, respectively. Only with 16–17 days' dry exposure the ³H-thymidine labelling index increases to 67%. The frequency of the initial patterns (DD-2C) which are usually less frequent, has been found to have increased with the rapid method. No difference in grain density of labelling of ³H-thymidine could be detected between the rapid method and the conventional method. The resolution of grains also seems to be better by the rapid method, due probably to smaller size and lack of superimposition of grains. Other applications, advantages and limitations have been discussed.