Items where Subject is "T Technology > TN Mining engineering. Metallurgy"

A

Abhijit, A. ; Varghese, J. ; Chalavadi, P. ; Sai Karthik, P. ; Bhanu Sankara Rao, K. ; Rajulapati, K. V. (2019) Negative Strain Rate Sensitivity in Two-Phase Nanocrystalline CoCrFeMnNi High-Entropy Alloy with Broader Grain Size Distribution Studied by Nanoindentation Transactions of the Indian Institute of Metals, 72 (10). pp. 2861-2867. ISSN 0972-2815

Arora, P. R. ; Raghavan, M. R. ; Prasad, Y. V. R. K. (1988) Effect of prestrain on fatigue crack propagation in mild steel containing non-metallic inclusions Engineering Fracture Mechanics, 29 (1). pp. 67-79. ISSN 0013-7944

B

Balachandran, Shanoob ; Mishra, Rajiv S. ; Banerjee, Dipankar (2020) Friction stir processing of a metastable β titanium alloy in β and α+β phase fields Materials Science and Engineering A, 772 . p. 138705. ISSN 0921-5093

Bawane, Kaustubh Krishna ; Srinivasan, Dheepa ; Banerjee, Dipankar (2018) Microstructural Evolution and Mechanical Properties of Direct Metal Laser-Sintered (DMLS) CoCrMo After Heat Treatment Metallurgical and Materials Transactions A, 49 (9). pp. 3793-3811. ISSN 1073-5623

C

Chakravartty, J. K. ; Kapoor, R. ; Banerjee, S. ; Prasad, Y. V. R. K. (2007) Characterization of hot deformation behavior of Zr–1Nb–1Sn alloy Journal of Nuclear Materials, 362 (1). pp. 75-86. ISSN 0022-3115

D

Dash, Biswaranjan ; Jangid, Rahul ; Koneru, Shalini Roy ; Pilchak, Adam ; Banerjee, Dipankar (2019) The formation of α at triple junctions of parent β phase in titanium alloys Philosophical Magazine, 99 (8). pp. 956-970. ISSN 1478-6435

G

Ganesan, V. ; Kannan, R. ; Mariappan, K. ; Sukumaran, G. ; Sandhya, R. ; Rao, K. Bhanu Sankara (2012) Evaluation of the Effect of Dynamic Sodium on the Low Cycle Fatigue Properties of 316L(N) Stainless Steel Base and Weld Joints High Temperature Materials and Processes, 31 (3). ISSN 0334-6455

Ganji, Ramya Sree ; Rajulapati, Koteswararao V. ; Rao, K. Bhanu Sankara (2020) Development of a Multi-phase AlCuTaVW High-Entropy Alloy Using Powder Metallurgy Route and its Mechanical Properties Transactions of the Indian Institute of Metals, 73 (3). pp. 613-618. ISSN 0972-2815

Ganji, Ramya Sree ; Sai Karthik, P. ; Bhanu Sankara Rao, K. ; Rajulapati, Koteswararao V. (2017) Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro- and nanoindentation methods Acta Materialia, 125 . pp. 58-68. ISSN 1359-6454

H

Hémery, S. ; Villechaise, P. ; Banerjee, D. (2020) Microplasticity at Room Temperature in α/β Titanium Alloys Metallurgical and Materials Transactions A, 51 (10). pp. 4931-4969. ISSN 1073-5623

J

Jadav, J. ; Rajulapati, K.V. ; Rao, K. Bhanu Sankara ; Prasad, N. Eswara ; Mythili, R. ; Prasad, Kartik (2019) Strain controlled isothermal low cycle fatigue life, deformation and fracture characteristics of Superni 263 superalloy Materials Science and Engineering A, 760 . pp. 296-315. ISSN 0921-5093

Jadav, Jhansi ; Rajulapati, K. V. ; Bhanu Sankara Rao, K. ; Eswara Prasad, N. (2019) Effects of Strain Rate and Temperature on Tensile Properties, Deformation and Dynamic Strain Ageing Behavior of Ni-Base Superalloy Superni 263 INAE Letters, 4 (4). pp. 241-250. ISSN 2366-326X

Jadav, Jhansi ; Rajulapati, K. V. ; Rao, K. Bhanu Sankara ; Prasad, N. Eswara ; Mythili, R. ; Prasad, Kartik (2020) Comprehensive Assessment of Low Cycle Fatigue Behavior of Nickel-Base Superalloy Superni 263 in the Range 298–1023 K Transactions of the Indian National Academy of Engineering, 5 (3). pp. 555-571. ISSN 2662-5415

Jadav, Jhansi ; Rajulapati, Koteswara Rao. V. ; Eswaraprasad, N. ; Bhanu Sankara Rao, K. (2018) Effect of Temperature on Tensile flow behaviour of Nimonic C-263 alloy Materials Today: Proceedings, 5 (2). pp. 5475-5480. ISSN 2214-7853

Jana, Biswanath ; Rajulapati, KV ; Prasad, N Eswara ; Jain, RK ; Rao, K Bhanu Sankara (2016) Effect of carbon fabric type on properties of 2D carbon–carbon composites processed by liquid pitch impregnation–pyrolysis Journal of Composite Materials, 50 (23). pp. 3239-3254. ISSN 0021-9983

K

Kailas, Satish V. ; Prasad, Y. V. R. K. ; Biswas, S. K. (1994) Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K Metallurgical and Materials Transactions A, 25A (10). pp. 2173-2179. ISSN 1073-5623

Kalali, Deekshith G. ; Antharam, Sairam ; Hasan, Mohsin ; Karthik, P. Sai ; Phani, P. Sudharshan ; Bhanu Sankara Rao, K. ; Rajulapati, Koteswararao V. (2021) On the origins of ultra-high hardness and strain gradient plasticity in multi-phase nanocrystalline MoNbTaTiW based refractory high-entropy alloy Materials Science and Engineering A, 812 . p. 141098. ISSN 0921-5093

Kannan, R. ; Ganesan, V. ; Mariappan, K. ; Sukumaran, G. ; Sandhya, R. ; Mathew, M.D. ; Bhanu Sankara Rao, K. (2011) Influence of dynamic sodium environment on the creep–fatigue behaviour of Modified 9Cr–1Mo ferritic–martensitic steel Nuclear Engineering and Design, 241 (8). pp. 2807-2812. ISSN 0029-5493

L

Liang, Qianglong ; Wang, Dong ; Zheng, Yufeng ; Zhao, Shuangshuang ; Gao, Yipeng ; Hao, Yulin ; Yang, Rui ; Banerjee, Dipankar ; Fraser, Hamish L. ; Wang, Yunzhi (2020) Shuffle-nanodomain regulated strain glass transition in Ti-24Nb-4Zr-8Sn alloy Acta Materialia, 186 . pp. 415-424. ISSN 1359-6454

M

Manugula, Vijaya L. ; Rajulapati, Koteswararao V. ; Madhusudhan Reddy, G. ; Mythili, R. ; Bhanu Sankara Rao, K. (2016) A critical assessment of the microstructure and mechanical properties of friction stir welded reduced activation ferritic–martensitic steel Materials & Design, 92 . pp. 200-212. ISSN 0264-1275

Manugula, Vijaya L. ; Rajulapati, Koteswararao V. ; Reddy, G. Madhusudhan ; Rajendra Kumar, E. ; Rao, K. Bhanu Sankara (2018) Friction stir welding of thick section reduced activation ferritic–martensitic steel Science and Technology of Welding & Joining, 23 (8). pp. 666-676. ISSN 1362-1718

Manugula, Vijaya L. ; Rajulapati, Koteswararao V. ; Reddy, G. Madhusudhan ; Rao, K. Bhanu Sankara (2017) Role of evolving microstructure on the mechanical properties of electron beam welded ferritic-martensitic steel in the as-welded and post weld heat-treated states Materials Science and Engineering A, 698 . pp. 36-45. ISSN 0921-5093

Mathew, M.D. ; Vanaja, J. ; Laha, K. ; Varaprasad Reddy, G. ; Chandravathi, K.S. ; Bhanu Sankara Rao, K. (2011) Tensile and creep properties of reduced activation ferritic–martensitic steel for fusion energy application Journal of Nuclear Materials, 417 (1-3). pp. 77-80. ISSN 0022-3115

Mathias, Snehith ; Srinivasan, Dheepa ; Setty, Raghavendra ; Jayaprakash, K. N. ; Ahmed, Saem ; Banerjee, Dipankar (2021) Additive Processing of a X22CrMoV12-1 Steel: Structure, Properties and Product Transactions of the Indian National Academy of Engineering, 6 (2). pp. 283-295. ISSN 2662-5415

N

Nagesha, A. ; Kannan, R. ; Sandhya, R. ; Sastry, G.V.S. ; Mathew, M.D. ; Rao, K. Bhanu Sankara ; Singh, Vakil (2013) Thermomechanical Fatigue Behaviour of a Modified 9Cr-1Mo Ferritic-Martensitic Steel Procedia Engineering, 55 . pp. 199-203. ISSN 1877-7058

Nagesha, A. ; Kannan, R. ; Sastry, G.V.S. ; Sandhya, R. ; Singh, Vakil ; Bhanu Sankara Rao, K. ; Mathew, M.D. (2012) Isothermal and thermomechanical fatigue studies on a modified 9Cr–1Mo ferritic martensitic steel Materials Science and Engineering A, 554 . pp. 95-104. ISSN 0921-5093

Nagini, M. ; Vijay, R. ; Rajulapati, Koteswararao V. ; Rao, K. Bhanu Sankara ; Ramakrishna, M. ; Reddy, A. V. ; Sundararajan, G. (2016) Effect of Process Parameters on Microstructure and Hardness of Oxide Dispersion Strengthened 18Cr Ferritic Steel Metallurgical and Materials Transactions A, 47 (8). pp. 4197-4209. ISSN 1073-5623

P

Padmavardhani, D. ; Prasad, Y. V. R. K. (1992) Effect of zinc content on the processing map for hot working of α brass Materials Science and Engineering A, 157 (1). pp. 43-51. ISSN 0921-5093

Panda, Subrata ; Banerjee, Dipankar ; Avadhani, Ganesh S. ; Suwas, Satyam (2018) A variant selection mechanism in the deformed and recrystallized β matrix of a metastable β-titanium alloy Philosophical Magazine Letters, 98 (7). pp. 273-282. ISSN 0950-0839

Patibanda, Supriya ; Varam, Sreedevi ; Gollapudi, Srikant ; Rao, K. Bhanu Sankara ; Rajulapati, Koteswararao V. (2020) On the Hardness and Strain Rate Sensitivity of Electrodeposited Nanocrystalline Ni–18 wt% Co Alloy Studied by Nanoindentation Transactions of the Indian Institute of Metals, 73 (2). pp. 457-464. ISSN 0972-2815

Prasad, Y. V. R. K. ; Sastry, D. H. ; Deevi, S. C. (2001) Hot working behavior of extruded powder products of B2 iron aluminide alloys Materials Science and Engineering A, 311 (1-2). pp. 42-53. ISSN 0921-5093

Prasad, Y. V. R. K. ; Sastry, D. H. ; Vasu, K. I. (1970) Mechanism of low-temperature deformation in quenched aluminium-magnesium alloys Materials Science and Engineering, 6 (5). pp. 327-333. ISSN 0025-5416

Prasad, Kartik ; Abhaya, S. ; Amarendra, G. ; Kumar, Vikas ; Rajulapati, K.V. ; Bhanu Sankara Rao, K. (2013) Fatigue crack growth behaviour of a near α titanium alloy Timetal 834 at 450°C and 600°C Engineering Fracture Mechanics, 102 . pp. 194-206. ISSN 0013-7944

Prasad, Kartik ; Amrithapandian, S. ; Panigrahi, B.K. ; Kumar, Vikas ; Bhanu Sankara Rao, K. ; Sundararaman, M. (2015) Experimental evidence for segregation of interstitial impurities to defects in a near α titanium alloy during dynamic strain aging using energy filtered transmission electron microscopy Materials Science and Engineering A, 638 . pp. 90-96. ISSN 0921-5093

Prasad, Kartik ; Karamched, Phani S. ; Bhattacharjee, A. ; Kumar, Vikas ; Bhanu Sankara Rao, K. ; Sundararaman, M. (2015) Electron back scattered diffraction characterization of thermomechanical fatigue crack propagation of a near α titanium alloy Timetal 834 Materials & Design, 65 . pp. 297-311. ISSN 0261-3069

Prasad, Kartik ; Kumar, Vikas ; Bhanu Sankara Rao, K. ; Sundararaman, M. (2016) Effects of Crack Closure and Cyclic Deformation on Thermomechanical Fatigue Crack Growth of a Near α Titanium Alloy Metallurgical and Materials Transactions A, 47 (7). pp. 3713-3730. ISSN 1073-5623

Prasad, Kartik ; Kumar, Vikas ; Rao, K. Bhanu Sankara ; Sundararaman, M. (2016) A comparative assessment of crack closure mechanisms in Timetal 834 near α titanium alloy under isothermal and thermomechanical fatigue loading Journal of Alloys and Compounds, 688 . pp. 8-11. ISSN 0925-8388

Prasad, Kartik ; Kumar, Vikas ; Rao, Kota Bhanu Sankara ; Sundararaman, Mahadevan (2017) Effects of silicon on characteristics of dynamic strain aging in a near-α titanium alloy International Journal of Materials Research, 108 (4). pp. 275-285. ISSN 1862-5282

Prasad, Kartik ; Sarkar, Rajdeep ; Kumar, Vikas ; Rao, K. Bhanu Sankara ; Sundararaman, M. (2016) Influence of test temperature on cyclic deformation behavior of a near α titanium alloy Materials Science and Engineering A, 662 . pp. 373-384. ISSN 0921-5093

Prasad, Kartik ; Sarkar, Rajdeep ; Rao, K. Bhanu Sankara ; Sundararaman, M. (2016) A Critical Assessment of Cyclic Softening and Hardening Behavior in a Near-α Titanium Alloy During Thermomechanical Fatigue Metallurgical and Materials Transactions A, 47 (10). pp. 4904-4921. ISSN 1073-5623

Prasad Reddy, G. V. ; Nagesha, A. ; Sandhya, R. ; Sankaran, S. ; Mathew, M. D. ; Bhanu Sankara Rao, K. (2015) Thermomechanical and Isothermal Fatigue Behavior of 316LN Stainless Steel with Varying Nitrogen Content Metallurgical and Materials Transactions A, 46 (2). pp. 695-707. ISSN 1073-5623

Prasad Reddy, G. V. ; Nagesha, A. ; Sandhya, R. ; Sankaran, S. ; Mathew, M. D. ; Bhanu Sankara Rao, K. (2015) Thermomechanical and Isothermal Fatigue Behavior of 316LN Stainless Steel with Varying Nitrogen Content Metallurgical and Materials Transactions A, 46 (2). pp. 695-707. ISSN 1073-5623

Prasad Reddy, G.V. ; Kannan, R. ; Mariappan, K. ; Sandhya, R. ; Sankaran, S. ; Bhanu Sankara Rao, K. (2015) Effect of strain rate on low cycle fatigue of 316LN stainless steel with varying nitrogen content: Part-I cyclic deformation behavior International Journal of Fatigue, 81 . pp. 299-308. ISSN 0142-1123

R

Radhakrishna Bhat, B. V. ; Mahajan, Y. R. ; Roshan, H. Md. ; Prasad, Y. V. R. K. (1994) Characteristics of superplasticity domain in the processing map for hot working of an Al alloy 2014-20vol.%Al₂O₃ metal matrix composite Materials Science and Engineering A, 189 (1-2). pp. 137-145. ISSN 0921-5093

Rahul, R. ; Rajulapati, K. V. ; Reddy, G. M. ; Mohandas, T. ; Bhanu Sankara Rao, K. (2017) Studies on Effect of Parent Metal Condition on the Room Temperature Mechanical Properties of Ti6Al4V Friction Welds Transactions of the Indian Institute of Metals, 70 (9). pp. 2277-2291. ISSN 0972-2815

Ramakrishna, R.V.S.M. ; Bhanu Sankara Rao, K. ; Madhusudhan Reddy, G. ; Gautam, Jai Prakash (2021) Microstructure and mechanical property evolution of post weld heat treated bainitic steel welds Materials Today: Proceedings, 44 . pp. 2919-2925. ISSN 2214-7853

Rao, K. P. ; Prasad, Y. V. R. K. (1986) High temperature deformation kinetics of Al-4Mg alloy Journal of Mechanical Working Technology, 13 (1). pp. 83-95. ISSN 0378-3804

Rao, K. P. ; Prasad, Y. V. R. K. ; Sivaram, K. (1990) Deformation processing map for control of microstructure in Al-4Mg alloy Materials Letters, 10 (1-2). pp. 66-70. ISSN 0167-577X

S

Sagar, P. K. ; Banerjee, D. ; Muraleedharan, K. ; Prasad, Y. V. R. K. (1996) High-temperature deformation processing of Ti-24Al-20Nb Metallurgical and Materials Transactions A, 27A (9). pp. 2593-2604. ISSN 1073-5623

Sambasiva Rao, G. ; Prasad, Y. V. R. K. (1982) Grain boundary strengthening in strongly textured magnesium produced by hot rolling Metallurgical and Materials Transactions A, 13A (12). pp. 2219-2226. ISSN 1073-5623

Sasikala, G. ; Mannan, S. L. ; Mathew, M. D. ; Rao, K. Bhanu (2000) Creep deformation and fracture behavior of types 316 and 316L(N) stainless steels and their weld metals Metallurgical and Materials Transactions A, 31 (4). pp. 1175-1185. ISSN 1073-5623

Sastry, D. H. ; Prasad, Y. V. R. K. ; Vasu, K. L. (1969) On the low temperature deformation mechanism in polycrystalline cadmium Acta Metallurgica, 17 (12). pp. 1453-1457. ISSN 0001-6160

Shanmugavel, M. ; Nandagopal, M. ; Sandhya, R. ; Bhanu Sankara Rao, K. ; Gnanamoorthy, R. (2008) Evaluation of activation energy for dynamic strain aging process in 316L(N)/316(N) SS weld joints Transactions of the Indian Institute of Metals, 61 (4). pp. 301-306. ISSN 0972-2815

Sivaprasad, P. V. ; Venugopal, S. ; Venugopal, Sridhar ; Maduraimuthu, V. ; Vasudevan, M. ; Mannan, S. L. ; Prasad, Y. V. R. K. ; Chaturvedi, R. C. (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests Journal of Materials Processing Technology, 132 (1-3). pp. 262-268. ISSN 0924-0136

Somani, M. C. ; Birla, N. C. ; Prasad, Y. V. R. K. ; Singh, V. (1995) Microstructural validation of processing maps using the hot extrusion of P/M Nimonic AP-1 superalloy Journal of Materials Processing Technology, 52 (2-4). pp. 225-237. ISSN 0924-0136

Sundaram, R. S. ; Sastry, D. H. ; Prasad, Y. V. R. K. (2003) Hot workability of as-cast Fe₃Al-2.5%Cr intermetallic alloy Materials Science and Engineering A, 347 (1-2). pp. 86-92. ISSN 0921-5093

T

Tiwary, Chandra Sekhar ; Kashiwar, Ankush ; Bhowmick, Sanjit ; Hari Kumar, K.C. ; Chattopadhyay, Kamanio ; Banerjee, Dipankar (2018) Engineering an ultrafine intermetallic eutectic ternary alloy for high strength and high temperature applications Scripta Materialia, 157 . pp. 67-71. ISSN 1359-6462

Tiwary, Chandra Sekhar ; Paliwal, Manas ; Kashyap, Sanjay ; Pandey, Praful ; Sarkar, Suman ; Kundu, Ipshita ; Bhaskar, Shakti ; Jung, In-Ho ; Chattopadhyay, K. ; Banerjee, Dipankar (2020) Microstructures and mechanical properties of ternary Ti–Si–Sn alloys Materials Science and Engineering A, 770 . p. 138472. ISSN 0921-5093

V

Varam, Sreedevi ; Prasad, Muvva D. ; Rao, K. Bhanu Sankara ; Rajulapati, Koteswararao V. (2016) Mechanical properties of in situ consolidated nanocrystalline multi-phase Al–Pb–W alloy studied by nanoindentation Philosophical Magazine, 96 (35). pp. 3671-3685. ISSN 1478-6435

Varam, Sreedevi ; Rajulapati, Koteswararao V. ; Bhanu Sankara Rao, K. (2014) Strain rate sensitivity studies on bulk nanocrystalline aluminium by nanoindentation Journal of Alloys and Compounds, 585 . pp. 795-799. ISSN 0925-8388

Varam, Sreedevi ; Rajulapati, Koteswararao V. ; Bhanu Sankara Rao, K. ; Scattergood, Ronald O. ; Murty, Korukonda L. ; Koch, Carl C. (2014) Loading Rate-Dependent Mechanical Properties of Bulk Two-Phase Nanocrystalline Al-Pb Alloys Studied by Nanoindentation Metallurgical and Materials Transactions A, 45 (11). pp. 5249-5258. ISSN 1073-5623

Varghese, Johny ; Rajulapati, Koteswararao V. ; Rao, K. Bhanu Sankara ; Akash, N. Chavan ; Meshram, S. D. ; Reddy, G. Madhusudhan (2022) Characterization of Microstructure and Mechanical Properties of Friction Stir Welded Reduced Activation Ferritic–Martensitic Steel in As-Received, As-Welded and Post-weld Heat-Treated States Transactions of the Indian Institute of Metals, 75 (10). pp. 2581-2594. ISSN 0972-2815

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1993) Influence of cast versus wrought microstructure on the processing map for hot working of stainless steel type AISI 304 Materials Letters, 17 (6). pp. 388-392. ISSN 0167-577X

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1996) Influence of strain rate and state-of-stress on the formation of ferrite in stainless steel type AISI 304 during hot working Materials Letters, 26 (3). pp. 161-165. ISSN 0167-577X

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1997) Instability map for cold and warm working of as-cast 304 stainless steel Journal of Materials Processing Technology, 65 (1-3). pp. 107-115. ISSN 0924-0136

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1995) Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps Journal of Nuclear Materials, 227 (1-2). pp. 1-10. ISSN 0022-3115

Venugopal, S. ; Mannan, S. L. ; Prasad, Y. V. R. K. (1992) Processing map for cold and hot working of stainless steel type AISI 304 L Materials Letters, 15 (1-2). pp. 79-83. ISSN 0167-577X

Villechaise, P. ; Zheng, Yufeng ; Wang, Dong ; Banerjee, Rajarshi ; Banerjee, Dipankar ; Wang, Yunzhi ; Fraser, Hamish L. ; Appolaire, B. ; Castany, P. ; Dehmas, M. ; Delaunay, C. ; Delfosse, J. ; Denquin, A. ; Gautier, E. ; Germain, L. ; Gey, N. ; Gloriant, T. ; Hascoët, J.-Y. ; Hémery, S. ; Millet, Y. ; Monceau, D. ; Pettinari-Sturmel, F. ; Piellard, M. ; Prima, F. ; Viguier, B. (2020) Exploration of Nano-scale Structural Instabilities in Metastable β Titanium Alloys Using Advanced Electron Microscopy MATEC Web of Conferences, 321 . p. 12001. ISSN 2261-236X

Y

Yaddanapudi, Krishna ; Saha, Sabyasachi ; Raghavan, Srinivasan ; Muraleedharan, K. ; Banerjee, Dipankar (2018) Nitridation of Sapphire as a Precursor to GaN Growth: Structure and Chemistry Crystal Growth & Design, 18 (9). pp. 4978-4986. ISSN 1528-7483

Yagati, Krishna P. ; Bathe, Ravi N. ; Rajulapati, Koteswararao V. ; Sankara Rao, K. Bhanu ; Padmanabham, G. (2014) Fluxless arc weld-brazing of aluminium alloy to steel Journal of Materials Processing Technology, 214 (12). pp. 2949-2959. ISSN 0924-0136

Yella, P. ; Venkateswarlu, P. ; Buddu, R.K. ; Ravi, N. ; Rao, K. Bhanu Sankara ; Kiran, P. Prem ; Rajulapati, Koteswararao V. (2018) Role of sacrificial layers on surface characteristics of laser shock peened SS304 plates Optics & Laser Technology, 107 . pp. 142-149. ISSN 0030-3992

Yella, Pardhu ; Rajulapati, K.V. ; Prasad Reddy, G.V. ; Sandhya, R. ; Prem Kiran, P. ; Buddu, Ramesh K. ; Bhanu Sankara Rao, K. (2019) Effect of laser shock peening on high cycle fatigue characteristics of 316LN stainless steel International Journal of Pressure Vessels and Piping, 176 . p. 103972. ISSN 0308-0161

Yella, Pardhu ; Varghese, J. ; Prem Kiran, P. ; Buddu, R. K. ; Bhanu Sankara Rao, K. ; Rajulapati, Koteswararao V. (2019) Mechanical Properties of Laser Shock-Peened Regions of SS316LN and SS304 Studied by Nanoindentation INAE Letters, 4 (4). pp. 215-225. ISSN 2366-326X

Yella, Pardhu ; Venkateswarlu, P. ; Buddu, Ramesh K. ; Vidyasagar, D.V. ; Sankara Rao, K. Bhanu ; Kiran, P. Prem ; Rajulapati, Koteswararao V. (2018) Laser shock peening studies on SS316LN plate with various sacrificial layers Applied Surface Science, 435 . pp. 271-280. ISSN 0169-4332

Z

Zheng, Yufeng ; Alam, Talukder ; Banerjee, Rajarshi ; Banerjee, Dipankar ; Fraser, Hamish L. (2018) The influence of aluminum and oxygen additions on intrinsic structural instabilities in titanium-molybdenum alloys Scripta Materialia, 152 . pp. 150-153. ISSN 1359-6462

Zheng, Yufeng ; Antonov, Stoichko ; Feng, Qiang ; Banerjee, Rajarshi ; Banerjee, Dipankar ; Fraser, Hamish L. (2020) Shuffle-induced modulated structure and heating-induced ordering in the metastable β-titanium alloy, Ti-5Al-5Mo-5V-3Cr Scripta Materialia, 176 . pp. 7-11. ISSN 1359-6462