Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

A

AGRAWAL, AMIT ; DJENIDI, LYAZID ; ANTONIA, R. A. (2005) Simulation of gas flow in microchannels with a sudden expansion or contraction Journal of Fluid Mechanics, 530 . pp. 135-144. ISSN 0022-1120

AGRAWAL, AMIT ; PRASAD, AJAY K. (2004) Evolution of a turbulent jet subjected to volumetric heating Journal of Fluid Mechanics, 511 . pp. 95-123. ISSN 0022-1120

Agrawal, A ; Singh, SG (2011) A review of state-of-the-art on flow boiling of water in microchannel International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena, 2 (1). pp. 1-34. ISSN 1949-4955

Agrawal, A. (2011) Description of Microfluidics Laboratory at Indian Institute of Technology Bombay, Mumbai, India International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena, 2 (2). ISSN 1949-4955

Agrawal, A. ; Djenidi, L. ; Antonia, R. A. (2004) LIF based detection of low-speed streaks Experiments in Fluids, 36 (4). pp. 600-603. ISSN 0723-4864

Agrawal, A. ; Prasad, A. (2002) Properties of vortices in the self-similar turbulent jet Experiments in Fluids, 33 (4). pp. 565-577. ISSN 0723-4864

Agrawal, Abhishek ; Agrawal, Amit (2006) Three-dimensional simulation of gaseous slip flow in different aspect ratio microducts Physics of Fluids, 18 (10). p. 103604. ISSN 1070-6631

Agrawal, Abhishek ; Djenidi, Lyazid ; Agrawal, Amit (2009) Simulation of gas flow in microchannels with a single 90^o bend Computers & Fluids, 38 (8). pp. 1629-1637. ISSN 0045-7930

Agrawal, Amit (2010) Analysis of vortex cores in turbulent flows Journal of Turbulence, 11 . N42. ISSN 1468-5248

Agrawal, Amit (2011) A Comprehensive Review on Gas Flow in Microchannels International Journal of Micro-Nano Scale Transport, 2 (1). pp. 1-40. ISSN 1759-3093

Agrawal, Amit (2005) A Conceptual Model for Entrainment in Cumulus Clouds Journal of the Atmospheric Sciences, 62 (7). pp. 2602-2606. ISSN 0022-4928

Agrawal, Amit (2005) Measurement of spectrum with particle image velocimetry Experiments in Fluids, 39 (5). pp. 836-840. ISSN 0723-4864

Agrawal, Amit ; Boersma, B. J. ; Prasad, Ajay K. (2005) Direct numerical simulation of a turbulent axisymmetric jet with buoyancy induced acceleration Flow, Turbulence and Combustion, 73 (3-4). pp. 277-305. ISSN 1386-6184

Agrawal, Amit ; Djenidi, Lyazid ; Antonia, R. A. (2010) Near-field measurements and development of a new boundary layer over a flat plate with localized suction Experiments in Fluids, 48 (5). pp. 747-762. ISSN 0723-4864

Agrawal, Amit ; Djenidi, Lyazid ; Antonia, R.A. (2006) Investigation of flow around a pair of side-by-side square cylinders using the lattice Boltzmann method Computers & Fluids, 35 (10). pp. 1093-1107. ISSN 0045-7930

Agrawal, Amit ; Dongari, Nishanth (2012) Application of Navier-Stokes equations to high Knudsen number flow in a fine capillary International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena, 3 (2). pp. 125-130. ISSN 1949-4955

Agrawal, Amit ; Duryodhan, V. S. ; Singh, S. G. (2012) PRESSURE DROP MEASUREMENTS WITH BOILING IN DIVERGING MICROCHANNEL Frontiers in Heat and Mass Transfer, 3 (1). ISSN 2151-8629

Agrawal, Amit ; Prabhu, S. V. (2008) Survey on measurement of tangential momentum accommodation coefficient Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 26 (4). pp. 634-645. ISSN 0734-2101

Agrawal, Amit ; Prabhu, S.V. (2008) Deduction of slip coefficient in slip and transition regimes from existing cylindrical Couette flow data Experimental Thermal and Fluid Science, 32 (4). pp. 991-996. ISSN 0894-1777

Agrawal, Amit ; Prasad, Ajay K. (2003) Integral Solution for the Mean Flow Profiles of Turbulent Jets, Plumes, and Wakes Journal of Fluids Engineering, 125 (5). pp. 813-822. ISSN 0098-2202

Agrawal, Amit ; Prasad, Ajay K. (2003) Measurements Within Vortex Cores in a Turbulent Jet Journal of Fluids Engineering, 125 (3). pp. 561-568. ISSN 0098-2202

Agrawal, Amit ; Prasad, Ajay K. (2002) Organizational Modes of Large-Scale Vortices in an Axisymmetric Turbulent Jet Flow, Turbulence and Combustion, 68 (4). pp. 359-377. ISSN 1386-6184

Agrawal, Amit ; Sreenivas, K.R ; Prasad, Ajay K (2004) Velocity and temperature measurements in an axisymmetric turbulent jet with cloud-like off-source heating International Journal of Heat and Mass Transfer, 47 (6-7). pp. 1433-1444. ISSN 0017-9310

Agrawal, Amit ; Verma, Gunjan (2008) Similarity analysis of planar and axisymmetric turbulent synthetic jets International Journal of Heat and Mass Transfer, 51 (25-26). pp. 6194-6198. ISSN 0017-9310

Anand, Ravi Kumar ; Boersma, B. J. ; Agrawal, Amit (2009) Detection of turbulent/non-turbulent interface for an axisymmetric turbulent jet: evaluation of known criteria and proposal of a new criterion Experiments in Fluids, 47 (6). ISSN 0723-4864

B

BHADOURIYA, RAMBIR ; AGRAWAL, AMIT ; S V, PRABHU (2015) Laminar flow heat transfer studies in a twisted square duct for constant wall heat flux boundary condition Sadhana (Academy Proceedings in Engineering Sciences), 40 (2). pp. 467-485. ISSN 0256-2499

Baburaj, P. ; Bandyopadhyay, B. (2014) Finite-time sliding mode flow control design via reduced model for a connection-oriented communication network Journal of the Franklin Institute, 351 (11). pp. 4960-4977. ISSN 0016-0032

Bandyopadhyay, B. ; Abera, Alemayehu G/Egziabher ; Janardhanan, S. ; Sreeram, Victor (2007) Sliding mode control design via reduced order model approach International Journal of Automation and Computing, 4 (4). pp. 329-334. ISSN 1476-8186

Bandyopadhyay, B. ; Kurode, Shailaja ; Gandhi, P.S. (2009) Sliding mode control for slosh-free motion-A class of underactuated system International Journal of Advanced Mechatronic Systems, 1 (3). p. 203. ISSN 1756-8412

Bandyopadhyay, B. ; Manjunath, T.C. (2008) FAULT TOLERANT CONTROL OF FLEXIBLE SMART STRUCTURES USING ROBUST DECENTRALIZED FAST OUTPUT SAMPLING FEEDBACK TECHNIQUE Asian Journal of Control, 9 (3). pp. 268-291. ISSN 1561-8625

Bandyopadhyay, B. ; Priya, P.S. Lal (2012) Discrete-time sliding mode control of systems with matched uncertainty using infrequent output measurements International Journal of Advanced Mechatronic Systems, 4 (2). p. 120. ISSN 1756-8412

Bandyopadhyay, B. ; Thakar, V. K. (2008) Discrete time output feedback sliding mode control for nonlinear MIMO system: a stepper motor case International Journal of Systems Science, 39 (1). pp. 89-104. ISSN 0020-7721

Bandyopadhyay, B. ; Unbehauen, H. ; Patre, B.M. (1998) A New Algorithm for Compensator Design for Higher-Order System via Reduced Model Automatica, 34 (7). pp. 917-920. ISSN 0005-1098

Bhadouriya, Rambir ; Agrawal, Amit ; Prabhu, S.V. (2015) Experimental and numerical study of fluid flow and heat transfer in a twisted square duct International Journal of Heat and Mass Transfer, 82 . pp. 143-158. ISSN 0017-9310

Bhadouriya, Rambir ; Agrawal, Amit ; Prabhu, S.V. (2015) Experimental and numerical study of fluid flow and heat transfer in an annulus of inner twisted square duct and outer circular pipe International Journal of Thermal Sciences, 94 . pp. 96-109. ISSN 1290-0729

Bhapkar, Udaysinh S. ; Mohanan, Sharika ; Agrawal, Amit ; Srivastava, Atul (2014) Interferometry based whole-field heat transfer measurements of an impinging turbulent synthetic jet International Communications in Heat and Mass Transfer, 58 . pp. 118-124. ISSN 0735-1933

Bhapkar, Udaysinh S. ; Srivastava, Atul ; Agrawal, Amit (2013) Acoustic and heat transfer aspects of an inclined impinging synthetic jet International Journal of Thermal Sciences, 74 . pp. 145-155. ISSN 1290-0729

Bhapkar, Udaysinh S. ; Srivastava, Atul ; Agrawal, Amit (2014) Acoustic and heat transfer characteristics of an impinging elliptical synthetic jet generated by acoustic actuator International Journal of Heat and Mass Transfer, 79 . pp. 12-23. ISSN 0017-9310

Bhapkar, Udaysinh S. ; Srivastava, Atul ; Agrawal, Amit (2015) Proper cavity shape can mitigate confinement effect in synthetic jet impingement cooling Experimental Thermal and Fluid Science, 68 . pp. 392-401. ISSN 08941777

Bhattacharya, S. S. ; Padmanabhan, K. A. (1995) A mechanistic model for boundary sliding controlled optimal superplastic flow. II. Experimental verification Journal of Materials Processing and Manufacturing Science (4). pp. 117-161. ISSN 1062-0656

Bhattacharya, S. S. ; Padmanabhan, K. A. (1997) A mechanistic model for boundary sliding controlled optimal superplastic flow. III. Numerical verification Journal of Materials Processing and Manufacturing Science, 5 . pp. 225-240. ISSN 1062-0656

Bhide, R.R. ; Singh, S.G. ; Duryodhan, V.S. ; Sridharan, A. ; Agrawal, A. (2013) Onset of nucleate boiling and critical heat flux with boiling water in microchannel International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena Journals, 4 (1). pp. 25-47. ISSN 1949-4955

Bhide, R.R. ; Singh, S.G. ; Sridharan, Arunkumar ; Duttagupta, S.P. ; Agrawal, Amit (2009) Pressure drop and heat transfer characteristics of boiling water in sub-hundred micron channel Experimental Thermal and Fluid Science, 33 (6). pp. 963-975. ISSN 0894-1777

Bhide, Rohit R ; Singh, Shiv G ; Sridharan, A ; Agrawal, Amit (2011) An active control strategy for reduction of pressure instabilities during flow boiling in a microchannel Journal of Micromechanics and Microengineering, 21 (3). 035021. ISSN 0960-1317

Biswas, Sukanta ; Agrawal, Amit (2013) Noise Reduction in a Large Enclosure Using Single, Dual and Ensconced Helmholtz Resonators Current Science, 104 (12). pp. 1681-1691. ISSN 0011-3891

Burattini, P. ; Agrawal, A. (2013) Wake interaction between two side-by-side square cylinders in channel flow Computers & Fluids, 77 . pp. 134-142. ISSN 0045-7930

Burattini, P. ; Lavoie, P. ; Agrawal, A. ; Djenidi, L. ; Antonia, R. A. (2006) Power law of decaying homogeneous isotropic turbulence at low Reynolds number Physical Review E, 73 (6). pp. 1-7. ISSN 1539-3755

C

Chakrabarti, A. K. ; Bandyopadhyay, B. (2003) Controller Design for a Gas Turbine Using Periodic Output Feedback Journal of Engineering for Gas Turbines and Power, 125 (3). pp. 613-616. ISSN 0742-4795

Chakrabarty, S. ; Bandyopadhyay, B. (2014) N-sigma stability of stochastic systems with sliding mode control Journal of the Franklin Institute, 351 (4). pp. 2232-2242. ISSN 0016-0032

Chatterjee, Rajeswar ; Duryodhan, V.S. ; Agrawal, Amit (2022) Impact of aspect ratio and thermophysical properties on heat transfer behavior in spiral microchannel International Journal of Thermal Sciences, 172 . p. 107335. ISSN 1290-0729

Chaudhari, Mangesh ; Puranik, Bhalchandra ; Agrawal, Amit (2010) Effect of orifice shape in synthetic jet based impingement cooling Experimental Thermal and Fluid Science, 34 (2). pp. 246-256. ISSN 0894-1777

Chaudhari, Mangesh ; Puranik, Bhalchandra ; Agrawal, Amit (2010) Heat Transfer Analysis in a Rectangular Duct Without and With Cross-Flow and an Impinging Synthetic Jet IEEE Transactions on Components and Packaging Technologies, 33 (2). pp. 488-497. ISSN 1521-3331

Chaudhari, Mangesh ; Puranik, Bhalchandra ; Agrawal, Amit (2010) Heat transfer characteristics of synthetic jet impingement cooling International Journal of Heat and Mass Transfer, 53 (5-6). pp. 1057-1069. ISSN 0017-9310

Chaudhari, Mangesh ; Puranik, Bhalchandra ; Agrawal, Amit (2011) Multiple orifice synthetic jet for improvement in impingement heat transfer International Journal of Heat and Mass Transfer, 54 (9-10). pp. 2056-2065. ISSN 0017-9310

Chaudhari, Mangesh ; Verma, Gunjan ; Puranik, Bhalchandra ; Agrawal, Amit (2009) Frequency response of a synthetic jet cavity Experimental Thermal and Fluid Science, 33 (3). pp. 439-448. ISSN 0894-1777

Chaudhari, Mangesh B. ; Puranik, Bhalchandra ; Agrawal, Amit (2012) Heat Transfer Characteristics of a Heat Sink in Presence of a Synthetic Jet IEEE Transactions on Components, Packaging and Manufacturing Technology, 2 (3). pp. 457-463. ISSN 2156-3950

D

Demsis, Anwar ; Prabhu, S.V. ; Agrawal, Amit (2010) Influence of wall conditions on friction factor for flow of gases under slip condition Experimental Thermal and Fluid Science, 34 (8). pp. 1448-1455. ISSN 0894-1777

Demsis, Anwar ; Verma, Bhaskar ; Prabhu, S. V. ; Agrawal, Amit (2009) Experimental determination of heat transfer coefficient in the slip regime and its anomalously low value Physical Review E, 80 (1). ISSN 1539-3755

Demsis, Anwar ; Verma, Bhaskar ; Prabhu, S.V. ; Agrawal, Amit (2010) Heat transfer coefficient of gas flowing in a circular tube under rarefied condition International Journal of Thermal Sciences, 49 (10). pp. 1994-1999. ISSN 1290-0729

Dhanalakshmi, K. ; Umapathy, M. ; Ezhilarasi, D. ; Bandyopadhyay, B. (2011) Design and implementation of fast output sampling feedback control for shape memory alloy actuated structures Smart Structures and Systems, 8 (4). pp. 367-384. ISSN 1738-1584

Divinski, Sergiy V. ; Padmanabhan, K. A. ; Wilde, Gerhard (2011) Microstructure evolution during severe plastic deformation Philosophical Magazine, 91 (36). pp. 4574-4593. ISSN 1478-6435

Djenidi, L. ; Agrawal, A. ; Antonia, R.A. (2009) Anisotropy measurements in the boundary layer over a flat plate with suction Experimental Thermal and Fluid Science, 33 (7). pp. 1106-1111. ISSN 0894-1777

Dongari, Nishanth ; Agrawal, Abhishek ; Agrawal, Amit (2007) Analytical solution of gaseous slip flow in long microchannels International Journal of Heat and Mass Transfer, 50 (17-18). pp. 3411-3421. ISSN 0017-9310

Dongari, Nishanth ; Agrawal, Amit (2012) Modeling of Navier–Stokes equations for high Knudsen number gas flows International Journal of Heat and Mass Transfer, 55 (15-16). pp. 4352-4358. ISSN 0017-9310

Duryodhan, V S ; Singh, S G ; Agrawal, A (2014) Liquid flow through converging microchannels and a comparison with diverging microchannels Journal of Micromechanics and Microengineering, 24 (12). p. 125002. ISSN 0960-1317

Duryodhan, V. S. ; Singh, S. G. ; Agrawal, Amit (2013) Liquid flow through a diverging microchannel Microfluidics and Nanofluidics, 14 (1-2). pp. 53-67. ISSN 1613-4982

Duryodhan, V.S. ; Singh, Abhimanyu ; Singh, S.G. ; Agrawal, Amit (2015) Convective heat transfer in diverging and converging microchannels International Journal of Heat and Mass Transfer, 80 . pp. 424-438. ISSN 0017-9310

E

Ezhilarasi, D ; Umapathy, M ; Bandyopadhyay, B (2006) Design and experimental evaluation of piecewise output feedback control for structural vibration suppression Smart Materials and Structures, 15 (6). pp. 1927-1938. ISSN 0964-1726

G

Gaddam, Anvesh ; Garg, Mayank ; Agrawal, Amit ; Joshi, Suhas S (2015) Modeling of liquid–gas meniscus for textured surfaces: effects of curvature and local slip length Journal of Micromechanics and Microengineering, 25 (12). p. 125002. ISSN 0960-1317

Garg, Mayank ; Agrawal, Amit ; Singh, Ramesh K. ; Joshi, Suhas S. (2011) Microscopic Textured Surfaces for Micro-Fluidic Applications International Journal of Automation Technology, 5 (1). pp. 30-37. ISSN 1881-7629

Gavasane, Abhimanyu ; Sachdev, Swapnil ; Mittal, Bharat ; Bhandarkar, Upendra ; Agrawal, Amit (2011) A Critical Assessment of the Maxwell Slip Boundary Condition for Rarified Wall Bounded Flows International Journal of Micro-Nano Scale Transport, 2 (2-3). pp. 109-116. ISSN 1759-3093

Gupta, Rajeev ; Bandyopadhyay, B. ; Kulkarni, A. M. (2005) Robust decentralized fast-output sampling technique based power system stabilizer for a multi-machine power system International Journal of Systems Science, 36 (5). pp. 297-314. ISSN 0020-7721

Gupta, Rajeev ; Bandyopadhyay, B. ; Kulkarni, A.M. (2003) Design of power system stabilizer for single machine system using robust fast output sampling feedback technique Electric Power Systems Research, 65 (3). pp. 247-257. ISSN 0378-7796

Guruganesh, R ; Bandyopadhyay, B. ; Arya, Hemendra (2014) Robust Stabilization of Micro Aerial Vehicles with Uncertain Actuator Nonlinearities International Journal of Micro Air Vehicles, 6 (1). pp. 43-62. ISSN 1756-8293

H

Hammad, A. M. ; Padmanabhan, K. A. ; Anantharaman, T. R. (1977) Deformation of commercial aluminium in the temperature range 300-700K. I. Flow characteristics Transactions of the Indian Institute of Metals, 30 . pp. 327-337. ISSN 0019-493X

Hammad, A. M. ; Padmanabhan, K. A. ; Van Tendeloo, G. ; Anantharaman, T. R. (1977) Deformation of commercial aluminium in the temperature range 300-700 K. II. Electron microscopy Transactions of the Indian Institute of Metals, 30 . pp. 338-342. ISSN 0019-493X

Hammad, Abdel Hady Mohamed ; Padmanabhan, Kuppuswamy Anantha ; Van Tendelo, Gustaaf ; Anantharaman, Tanjore Ramachandra (1987) Deformation of Al-2 wt.% Ge and Al-4 wt.% Ge alloys in the presence of precipitation of varying amounts Zeitschrift für Metallkunde, 78 . pp. 103-112. ISSN 0044-3093

Hammad, Abdel Hady Mohamed ; Padmanabhan, Kuppuswamy Anantha ; Van Tendeloo, Gustaaf ; Anantharaman, Tanjore Ramachandra (1987) Deformation of Al-Si and Al-Fe high purity alloys in the presence of precipitation of varying amounts Zeitschrift für Metallkunde, 78 . pp. 113-120. ISSN 0044-3093

I

Intesaaf, Ashraf ; Agrawal, Amit ; Khan, Majid Hassan ; P, Sooraj ; Srivastava, Atul ; Sharma, Atul (2015) Thrust generation and wake structure for flow across a pitching airfoil at low Reynolds number Sadhana Academy Proceedings in Engineering Sciences, 40 (8). pp. 2367-2379. ISSN 0256-2499

J

Jain, Manu ; Puranik, Bhalchandra ; Agrawal, Amit (2011) A numerical investigation of effects of cavity and orifice parameters on the characteristics of a synthetic jet flow Sensors and Actuators A: Physical, 165 (2). pp. 351-366. ISSN 0924-4247

Janardhanan, S. ; Bandyopadhyay, B. (2008) A NEW ALGORITHM FOR DISCRETE-TIME SLIDING MODE CONTROL USING INFREQUENT OUTPUT OBSERVATIONS Asian Journal of Control, 7 (3). pp. 310-318. ISSN 1561-8625

Joshi, Himanshu ; Agarwal, Arpit ; Puranik, Bhalchandra ; Shu, Chang ; Agrawal, Amit (2009) A hybrid FVM-LBM method for single and multi-fluid compressible flow problems International Journal for Numerical Methods in Fluids, 62 (4). 2010-n/a. ISSN 0271-2091

K

KUMAR, SHASHI RANJAN ; SHARMA, ATUL ; AGRAWAL, AMIT (2008) Simulation of flow around a row of square cylinders Journal of Fluid Mechanics, 606 . pp. 369-397. ISSN 0022-1120

Kumar, Nishant ; Prabhakar, Amit ; Tikekar, Mukul ; Singh, Shiv ; Agrawal, Amit (2013) Blood flow in non-circular microchannel under pulsating condition International Journal of Micro-Nano Scale Transport, 4 (1-2). pp. 33-50. ISSN 1759-3093

Kumar P., Ramesh ; Chalanga, Asif ; Bandyopadhyay, B. (2015) Smooth integral sliding mode controller for the position control of Stewart platform ISA Transactions, 58 . pp. 543-551. ISSN 0019-0578

M

Mall, Ashish ; Agrawal, Amit ; Singh, Ramesh K. ; Joshi, Suhas S. (2011) Numerical characterization of laminar bulk flow over textured surfaces Journal of Micro/Nanolithography, MEMS, and MOEMS, 10 (2). 023008. ISSN 1932-5150

Manjunath, T. C. ; Bandyopadhyay, B. (2008) VIBRATION CONTROL OF A SMART STRUCTURE USING PERIODIC OUTPUT FEEDBACK TECHNIQUE Asian Journal of Control, 6 (1). pp. 74-87. ISSN 1561-8625

P

Padmanabhan, K. A. (2000) Between Yes and No: some thoughts on basic research in an applied area Transactions of the Indian Institute of Metals (53). pp. 97-104. ISSN 0019-493X

Padmanabhan, K. A. (2003) From atomistics to macro-behavior: structural superplasticity in micro- and nano-crystalline materials International Journal of Materials Research, 94 . pp. 1046-1051. ISSN 1862-5282

Padmanabhan, K. A. (1982) Interpretation of in-situ HVEM studies of superplasticity Scripta Materialia, 16 . p. 1199. ISSN 1359-6462

Padmanabhan, K. A. ; Venugopal, P. (1988) Explosive compaction of YBa₂Cu₃O_7-δ superconducting powders-a preliminary report High Temperature Superconductors, Newsletter, 1 (5). pp. 8-9. ISSN 0953-1262

Panda, Subrat ; Bandyopadhyay, Bijnan (2008) Sliding Mode Control of Gas Turbines Using Multirate-Output Feedback Journal of Engineering for Gas Turbines and Power, 130 (3). ISSN 0742-4795

Parkhi, Prasad ; Bandyopdhyay, Bijnan ; Jha, Mahendra (2014) Roll control using discrete-time robust sliding hyperplanes and fast output sampling Journal of the Franklin Institute, 351 (4). pp. 2107-2124. ISSN 0016-0032

Phadke, Kruttika S. ; Madival, Deepak G. ; Venkataraman, Janani ; Kundu, Debosmita ; Ramanujan, K. S. ; Holla, Nisha ; Arakeri, Jaywant ; Tomar, Gaurav ; Datta, Santanu ; Ghatak, Arindam (2021) Novel non intrusive continuous use ZeBox technology to trap and kill airborne microbes Scientific Reports, 11 (1). ISSN 2045-2322

Prabhakar, Amit ; Kumar, Y V Bala Varun ; Tripathi, Siddhartha ; Agrawal, Amit (2015) A novel, compact and efficient microchannel arrangement with multiple hydrodynamic effects for blood plasma separation Microfluidics and Nanofluidics, 18 (5-6). pp. 995-1006. ISSN 1613-4982

Prasad, Kaushal ; Agrawal, Amit ; Sharma, Atul (2013) Poiseuille flow across an eccentrically confined stationary/rotating cylinder Ocean Engineering, 73 . pp. 41-54. ISSN 0029-8018

Prasad, Kaushal ; Paramane, Sachin B. ; Agrawal, Amit ; Sharma, Atul (2011) Effect of Channel-Confinement and Rotation on the Two-Dimensional Laminar Flow and Heat Transfer across a Cylinder Numerical Heat Transfer, Part A: Applications, 60 (8). pp. 699-726. ISSN 1040-7782

R

RAO, A. S. ; LAMBA, S. S. ; BANDYOPADHYAY, B. (1983) Choice of model order for multivariable systems International Journal of Systems Science, 14 (10). pp. 1171-1183. ISSN 0020-7721

Ramamurthi, Guruganesh ; Bandyopadhyay, Bijnan ; Arya, Hemendra ; Singh, G K (2016) Tracking control for nonminimum phase MIMO micro aerial vehicle – a dynamic sliding manifold approach Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 230 (9). pp. 1001-1029. ISSN 0959-6518

S

SEWATKAR, C. M. ; SHARMA, ATUL ; AGRAWAL, AMIT (2011) Simulation of flow across a row of transversely oscillating square cylinders Journal of Fluid Mechanics, 680 . pp. 361-397. ISSN 0022-1120

Saaj, Chakravarthini M. ; Bandyopadhyay, B. (2003) Variable structure model following controller using non-dynamic multirate output feedback International Journal of Control, 76 (13). pp. 1263-1271. ISSN 0020-7179

Salgado, I. ; Kamal, S. ; Bandyopadhyay, B. ; Chairez, I. ; Fridman, L. (2016) Control of discrete time systems based on recurrent Super-Twisting-like algorithm ISA Transactions, 64 . pp. 47-55. ISSN 0019-0578

Saxena, Ishan ; Agrawal, Amit ; Joshi, Suhas S (2009) Fabrication of microfilters using excimer laser micromachining and testing of pressure drop Journal of Micromechanics and Microengineering, 19 (2). 025025. ISSN 0960-1317

Sengupta, Samiran ; Khan, Majid H. ; Veluri, Vijay K. ; Vijayan, P.K. ; Agrawal, Amit ; Bhattacharya, S. (2015) PIV investigations on the turbulent mixing of two opposing flows inside a scaled chimney model of a research reactor Experimental Thermal and Fluid Science, 63 . pp. 115-132. ISSN 0894-1777

Sewatkar, C. M. ; Patel, Rahul ; Sharma, Atul ; Agrawal, Amit (2012) Flow around six in-line square cylinders Journal of Fluid Mechanics, 710 . pp. 195-233. ISSN 0022-1120

Sewatkar, C. M. ; Sharma, Atul ; Agrawal, Amit (2010) A First Attempt to Numerically Compute Forces on Birds in V Formation Artificial Life, 16 (3). pp. 245-258. ISSN 1064-5462

Sewatkar, C. M. ; Sharma, Atul ; Agrawal, Amit (2009) On the effect of Reynolds number for flow around a row of square cylinders Physics of Fluids, 21 (8). 083602. ISSN 1070-6631

Sewatkar, C.M. ; Sharma, Atul ; Agrawal, Amit (2012) On energy transfer in flow around a row of transversely oscillating square cylinders at low Reynolds number Journal of Fluids and Structures, 31 . pp. 1-17. ISSN 0889-9746

Shimjith, S.R. ; Tiwari, A.P. ; Naskar, M. ; Bandyopadhyay, B. (2010) Space–time kinetics modeling of Advanced Heavy Water Reactor for control studies Annals of Nuclear Energy, 37 (3). pp. 310-324. ISSN 0306-4549

Shrivastava, Mukul ; Agrawal, Amit ; Sharma, Atul (2013) A Novel Level Set-Based Immersed-Boundary Method for CFD Simulation of Moving-Boundary Problems Numerical Heat Transfer, Part B: Fundamentals, 63 (4). pp. 304-326. ISSN 1040-7790

Singh, Narendara ; Dongari, Nishanth ; Agrawal, Amit (2014) Analytical solution of plane Poiseuille flow within Burnett hydrodynamics Microfluidics and Nanofluidics, 16 (1-2). pp. 403-412. ISSN 1613-4982

Singh, Narendra ; Agrawal, Amit (2014) The Burnett equations in cylindrical coordinates and their solution for flow in a microtube Journal of Fluid Mechanics, 751 . pp. 121-141. ISSN 0022-1120

Singh, Narendra ; Gavasane, Abhimanyu ; Agrawal, Amit (2014) Analytical solution of plane Couette flow in the transition regime and comparison with Direct Simulation Monte Carlo data Computers & Fluids, 97 . pp. 177-187. ISSN 0045-7930

Singh, S G ; Jain, A ; Sridharan, A ; Duttagupta, S P ; Agrawal, Amit (2009) Flow map and measurement of void fraction and heat transfer coefficient using an image analysis technique for flow boiling of water in a silicon microchannel Journal of Micromechanics and Microengineering, 19 (7). 075004. ISSN 0960-1317

Singh, S.G. ; Bhide, R.R. ; Duttagupta, S.P. ; Puranik, B.P. ; Agrawal, A. (2009) Two-Phase Flow Pressure Drop Characteristics in Trapezoidal Silicon Microchannels IEEE Transactions on Components and Packaging Technologies, 32 (4). pp. 887-900. ISSN 1521-3331

Singh, S.G. ; Kulkarni, A. ; Duttagupta, S.P. ; Puranik, B.P. ; Agrawal, A. (2008) Impact of aspect ratio on flow boiling of water in rectangular microchannels Experimental Thermal and Fluid Science, 33 (1). pp. 153-160. ISSN 0894-1777

Singh, Shiv Govind ; Agrawal, Amit ; Duttagupta, Siddhartha P (2011) Reliable MOSFET operation using two-phase microfluidics in the presence of high heat flux transients Journal of Micromechanics and Microengineering, 21 (10). p. 105002. ISSN 0960-1317

Singh, Shiv Govind ; Duttagupta, Siddhartha P. ; Agrawal, Amit (2009) In Situ Impact Analysis of Very High Heat Flux Transients on Nonlinear p-n Diode Characteristics and Mitigation Using On-Chip Single- and Two-Phase Microfluidics Journal of Microelectromechanical Systems, 18 (6). pp. 1208-1219. ISSN 1057-7157

Subramania Sarma, V. ; Padmanabhan, K. A. (2002) Load sequence effects in the high cyde fatigue of two ferrite-pearlite microalloyed steels International Journal of Materials Research, 93 . pp. 244-247. ISSN 1862-5282

Subudhi, Sudhakar ; Sreenivas, K. R. ; Arakeri, Jaywant H. (2013) Removal of unwanted fluid Heat and Mass Transfer, 49 (1). pp. 95-106. ISSN 0947-7411

Swaminathan, K. ; Padmanabhan, A. (1991) Some investigations on the forming behaviour of an extra deep drawing low carbon steel. II. Comparison with theoretical evaluation Transactions of the Indian Institute of Metals, 44 . pp. 249-253. ISSN 0019-493X

T

THOMAS, SUSY ; BANDYOPADHYAY, B. (1997) Variable structure model following control for industrial robots International Journal of Systems Science, 28 (4). pp. 325-334. ISSN 0020-7721

Tailor, Piyushkumar B. ; Agrawal, Amit ; Joshi, Suhas S. (2013) Evolution of electrochemical finishing processes through cross innovations and modeling International Journal of Machine Tools and Manufacture, 66 . pp. 15-36. ISSN 0890-6955

Tailor, Piyushkumar B. ; Agrawal, Amit ; Joshi, Suhas S. (2015) Numerical modeling of passive layer formation and stabilization in electrochemical polishing process Journal of Manufacturing Processes, 18 . pp. 107-116. ISSN 1526-6125

Tailor, Piyushkumar B. ; Agrawal, Amit ; Joshi, Suhas S. (2015) Parametric Understanding of Electro-Chemical Buffing (ECB) Using Current-Voltage Characterization Machining Science and Technology, 19 (3). pp. 440-459. ISSN 1091-0344

Thakar, Parth S. ; Bandyopadhyay, B. ; Gandhi, P.S. (2013) Sliding mode control for an underactuated slosh-container system using non-linear model International Journal of Advanced Mechatronic Systems, 5 (5). p. 335. ISSN 1756-8412

Tikekar, Mukul ; Singh, Shiv Govind ; Agrawal, Amit (2010) Measurement and modeling of pulsatile flow in microchannel Microfluidics and Nanofluidics, 9 (6). pp. 1225-1240. ISSN 1613-4982

Tripathi, Siddhartha ; Chakravarty, Pritish ; Agrawal, Amit (2014) On Non-Monotonic Variation of Hydrodynamically Focused Width in a Rectangular Microchannel Current Science, 107 (8). pp. 1260-1274. ISSN 0011-3891

Tripathi, Siddhartha ; Prabhakar, Amit ; Kumar, Nishant ; Singh, Shiv Govind ; Agrawal, Amit (2013) Blood plasma separation in elevated dimension T-shaped microchannel Biomedical Microdevices, 15 (3). pp. 415-425. ISSN 1387-2176

Tripathi, Siddhartha ; Varun Kumar, Y V Bala ; Prabhakar, Amit ; Joshi, Suhas S ; Agrawal, Amit (2015) Passive blood plasma separation at the microscale: a review of design principles and microdevices Journal of Micromechanics and Microengineering, 25 (8). 083001. ISSN 0960-1317

Tripathi, Siddhartha ; Varun Kumar, Y V Bala ; Prabhakar, Amit ; Joshi, Suhas S ; Agrawal, Amit (2015) Performance study of microfluidic devices for blood plasma separation—a designer’s perspective Journal of Micromechanics and Microengineering, 25 (8). 084004. ISSN 0960-1317

U

Umapathy, M. ; Bandyopadhyay, B. (2007) Design of Simultaneous Periodic Output Feedback Control for Smart Structures International Journal of Modelling and Simulation, 27 (1). pp. 38-45. ISSN 0228-6203

V

V.S., Duryodhan ; Singh, S.G. ; Agrawal, A. (2013) Boiling flow through diverging microchannel Sadhana (Academy Proceedings in Engineering Sciences), 38 (6). pp. 1067-1082. ISSN 0256-2499

Varade, Vijay ; Agrawal, Amit ; Prabhu, S.V. ; Pradeep, A.M. (2015) Early onset of flow separation with rarefied gas flowing in a 90° bend tube Experimental Thermal and Fluid Science, 66 . pp. 221-234. ISSN 08941777

Varade, Vijay ; Agrawal, Amit ; Prabhu, S.V. ; Pradeep, A.M. (2015) Velocity measurement in low Reynolds and low Mach number slip flow through a tube Experimental Thermal and Fluid Science, 60 . pp. 284-289. ISSN 0894-1777

Varade, Vijay ; Agrawal, Amit ; Pradeep, A M (2015) Slip flow through a converging microchannel: experiments and 3D simulations Journal of Micromechanics and Microengineering, 25 (2). 025015. ISSN 0960-1317

Varade, Vijay ; Agrawal, Amit ; Pradeep, A. M. (2014) Behaviour of rarefied gas flow near the junction of a suddenly expanding tube Journal of Fluid Mechanics, 739 . pp. 363-391. ISSN 0022-1120

Varade, Vijay ; Agrawal, Amit ; Pradeep, A. M. (2014) Experimental study of rarefied gas flow near sudden contraction junction of a tube Physics of Fluids, 26 (6). 062002. ISSN 1070-6631

Varade, Vijay ; Duryodhan, V.S. ; Agrawal, Amit ; Pradeep, A.M. ; Ebrahimi, Amin ; Roohi, Ehsan (2015) Low Mach number slip flow through diverging microchannel Computers & Fluids, 111 . pp. 46-61. ISSN 0045-7930

Venugopal, A. ; Agrawal, Amit ; Prabhu, S. V. (2014) Note: A vortex cross-correlation flowmeter with enhanced turndown ratio Review of Scientific Instruments, 85 (6). pp. 1-3. ISSN 0034-6748

Venugopal, A. ; Agrawal, Amit ; Prabhu, S.V. (2011) Influence of blockage and shape of a bluff body on the performance of vortex flowmeter with wall pressure measurement Measurement, 44 (5). pp. 954-964. ISSN 0263-2241

Venugopal, A. ; Agrawal, Amit ; Prabhu, S.V. (2010) Influence of blockage and upstream disturbances on the performance of a vortex flowmeter with a trapezoidal bluff body Measurement, 43 (4). pp. 603-616. ISSN 0263-2241

Venugopal, A. ; Agrawal, Amit ; Prabhu, S.V. (2014) Performance evaluation of piezoelectric and differential pressure sensor for vortex flowmeters Measurement, 50 . pp. 10-18. ISSN 0263-2241

Venugopal, A. ; Agrawal, Amit ; Prabhu, S.V. (2011) Review on vortex flowmeter—Designer perspective Sensors and Actuators A: Physical, 170 (1-2). pp. 8-23. ISSN 09244247

Venugopal, A. ; Agrawal, Amit ; Prabhu, S.V. (2015) Spanwise correlations in the wake of a circular cylinder and a trapezoid placed inside a circular pipe Journal of Fluids and Structures, 54 . pp. 536-547. ISSN 0889-9746

Verma, Bhaskar ; Demsis, Anwar ; Agrawal, Amit ; Prabhu, S. V. (2009) Semiempirical correlation for the friction factor of gas flowing through smooth microtubes Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 27 (3). pp. 584-590. ISSN 0734-2101

Y

Yadav, Harekrishna ; Srivastava, Atul ; Agrawal, Amit (2015) Characterization of Pulsating Submerged Jet—A Particle Image Velocimetry Study Journal of Thermal Science and Engineering Applications, 8 (1). ISSN 1948-5085