Browse by Fellow

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 364.

Mudinepalli, Venkata Ramana ; Leng, Feng ; Lin, W. C. ; Murty, B. S. (2016) Conventional and spark plasma sintered Ba0.8Pb0.2TiO3 nano ceramics: structural, dielectric and ferroelectric properties Metallurgical and Materials Transactions A, 47 (6). pp. 2579-2586. ISSN 1073-5623

Chattopadhyay, C. ; Murty, B. S. (2016) Kinetic modification of the ‘confusion principle’ for metallic glass formation Scripta Materialia, 116 . pp. 7-10. ISSN 1359-6462

Srivastav, Ajeet K. ; Basu, Joysurya ; Kashyap, Sanjay ; Chawake, Niraj ; Yadav, Devinder ; Murty, B. S. (2016) Crystallographic-shear-phase-driven W18O49 nanowires growth on nanocrystalline W surfaces Scripta Materialia, 115 . pp. 28-32. ISSN 1359-6462

Mudinepalli, V. R. ; Leng, F ; Reddy, M. P. ; Lin, W. C. ; Murty, B. S. (2016) Structural, dielectric and ferroelectric properties of lead-free Na0.5Bi0.5TiO3 ceramics prepared by spark plasma sintering technique Indian Journal of Physics, 90 (2). pp. 131-138. ISSN 0019-5480

Karthiselva, N. S. ; Murty, B. S. ; Bakshi, Srinivasa R. (2016) Low temperature synthesis of dense and ultrafine grained zirconium diboride compacts by reactive spark plasma sintering Scripta Materialia, 110 . pp. 78-81. ISSN 1359-6462

Arvindha Babu, D. ; Majumdar, Bhaskar ; Sarkar, Rajdeep ; Murty, B. S. ; Chattopadhyay, K. (2016) On the structural stability of melt spun ribbons of Fe95−xZrxB4Cu1 (x = 7 and 9) alloys and correlation with their magnetic properties Metallurgical and Materials Transactions A, 47 (1). pp. 560-571. ISSN 1073-5623

Chattopadhyay, C. ; Satish Idury, K. S. N. ; Bhatt, J. ; Mondal, K. ; Murty, B. S. (2016) Critical evaluation of glass forming ability criteria Materials Science and Technology, 32 (4). pp. 380-400. ISSN 0267-0836

Mudinepalli, V. R. ; Leng, F. ; Lin, W. C. ; Murty, B. S. (2016) Preparation and characterisation of fine-grained barium lead titanate ceramics by Spark Plasma Sintering technique Materials Research Innovations, 20 (2). pp. 81-85. ISSN 1432-8917

Mondal, K. ; Murty, B. S. (2015) Factors influencing oxidation behavior of metallic glasses Transactions of the Indian Institute of Metals, 68 (6). pp. 1151-1154. ISSN 0972-2815

Arvindha Babu, D. ; Majumdar, B. ; Murty, B. S. (2015) Glass forming ability, structure and soft magnetic properties of rapidly solidified Fe86Zr7−xNbxB6Cu1 alloy ribbons Transactions of the Indian Institute of Metals, 68 (6). pp. 1047-1051. ISSN 0019-493X

Vincent, S. ; Satish Idury, K. S. N. ; Gokhale, Aditya ; Basu, Joysurya ; Murty, B. S. ; Bhatt, Jatin (2015) Icosahedral cluster energetics in Zr60Cu10Al15Ni15 bulk metallic glass and their role on solidification behavior Transactions of the Indian Institute of Metals, 68 (6). pp. 1107-1112. ISSN 0019-493X

Mondal, R .A. ; Murty, B. S. ; Murthy, V. R. K. (2015) Dielectric, magnetic and enhanced magnetoelectric response in high energy ball milling assisted BST-NZF particulate composite Materials Chemistry and Physics, 167 . pp. 338-346. ISSN 0254-0584

Mudinepalli, Venkata Ramana ; Lin, Wen-Chin ; Song, S. H. ; Murty, B. S. (2015) Spark plasma sintering temperature effect on structural, dielectric and ferroelectric properties of Ba0.9Sr0.1TiO3 nanocrystalline ceramics Journal of Electronic Materials, 44 (11). pp. 4308-4315. ISSN 0361-5235

Satish Idury, K. S. N. ; Murty, B. S. ; Bhatt, Jatin (2015) Thermodynamic modeling and composition design for the formation of Zr–Ti–Cu–Ni–Al high entropy bulk metallic glasses Intermetallics, 65 . pp. 42-50. ISSN 0966-9795

Pramod, S. L. ; Prasada Rao, A. K. ; Murty, B. S. ; Bakshi, Srinivasa R. (2015) Effect of Sc addition on the microstructure and wear properties of A356 alloy and A356–TiB2 in situ composite Materials & Design, 78 . pp. 85-94. ISSN 0261-3069

Ramana Mudinepalli, Venkata ; Song, S. H. ; Li, J. Q. ; Murty, B. S. (2015) Magnetoelectric properties of lead-free Ni0.93Co0.02Mn0.05Fe1.95O4–Na0.5Bi0.5TiO3 multiferroic composites synthesized by spark plasma sintering Journal of Magnetism and Magnetic Materials, 386 . pp. 44-49. ISSN 0304-8853

Nandam, S. H. ; Murty, B. S. ; Sankaran, S. (2015) Influence of TiB2 addition on the precipitation kinetics in Al-7Si-0.3Mg in situ TiB2 composites Metallurgical and Materials Transactions A, 46 (7). pp. 2844-2849. ISSN 1073-5623

Pramod, S. L. ; Bakshi, Srinivasa R. ; Murty, B. S. (2015) Aluminum-based cast in situ composites: a review Journal of Materials Engineering and Performance, 24 (6). pp. 2185-2207. ISSN 1059-9495

Vincent, S. ; Daiwile, A. ; Devi, S. S. ; Kramer, M. J. ; Besser, M. F. ; Murty, B. S. ; Bhatt, Jatin (2015) Bio-corrosion and cytotoxicity studies on novel Zr55Co30Ti15 and Cu60Zr20Ti20 metallic glasses Metallurgical and Materials Transactions A, 46 (6). pp. 2422-2430. ISSN 1073-5623

Mudinepalli, Venkata Ramana ; Song, S. H. ; Ravi, M. ; Li, J. Q. ; Murty, B. S. (2015) Multiferroic properties of lead-free Ni0.5Zn0.5Fe1.9O4−δ−Na0.5Bi0.5TiO3 composites synthesized by spark plasma sintering Ceramics International, 41 (5). pp. 6882-6888. ISSN 0272-8842

Vaidya, Mayur ; Armugam, Senthil ; Kashyap, Sanjay ; Murty, B. S. (2015) Amorphization in equiatomic high entropy alloys Journal of Non-Crystalline Solids, 413 . pp. 8-14. ISSN 0022-3093

Mondal, R. A. ; Murty, B. S. ; Murthy, V. R. K. (2015) Grain size dependent phase transition and superparaelectric behavior of ferroelectric BST Physica B: Condensed Matter, 461 . pp. 10-16. ISSN 0921-4526

Srivastav, Ajeet K. ; Chawake, Niraj ; Murty, B. S. (2015) Grain-size-dependent non-monotonic lattice parameter variation in nanocrystalline W: the role of non-equilibrium grain boundary structure Scripta Materialia, 98 . pp. 20-23. ISSN 1359-6462

Mudinepalli, Venkata Ramana ; Feng, Leng ; Lin, Wen-Chin ; Murty, B. S. (2015) Effect of grain size on dielectric and ferroelectric properties of nanostructured Ba0.8Sr0.2TiO3 ceramics Journal of Advanced Ceramics, 4 (1). pp. 46-53. ISSN 2226-4108

Ang, Andrew Siao Ming ; Berndt, Christopher C. ; Sesso, Mitchell L. ; Anupam, Ameey ; Praveen, S. ; Kottada, Ravi Sankar ; Murty, B. S. (2015) Plasma-sprayed high entropy alloys: microstructure and properties of AlCoCrFeNi and MnCoCrFeNi Metallurgical and Materials Transactions A, 46 (2). pp. 791-800. ISSN 1073-5623

Karthiselva, N. S. ; Murty, B. S. ; Bakshi, Srinivasa R. (2015) Low temperature synthesis of dense TiB2 compacts by reaction spark plasma sintering International Journal of Refractory Metals and Hard Materials, 48 . pp. 201-210. ISSN 0263-4368

Vincent, S. ; Murty, B. S. ; Kramer, M. J. ; Bhatt, J. (2015) Micro and nano indentation studies on Zr60Cu10Al15Ni15 bulk metallic glass Materials & Design, 65 . pp. 98-103. ISSN 0261-3069

Mondal, R. A. ; Murty, B. S. ; Murthy, V. R. K. (2015) Origin of magnetocapacitance in chemically homogeneous and in homogeneous ferrites Physical Chemistry Chemical Physics, 17 (4). pp. 2432-2437. ISSN 1463-9076

Ramana Mudinepalli, Venkata ; Ramamanohar Reddy, N. ; Lin, Wen-Chin ; Siva Kumar, K. V. ; Murty, B. S, (2015) Phase transitions of the ferroelectric Na0.5Bi0.5TiO3 by dielectric and internal friction measurements Advanced Materials Letters, 6 (1). pp. 27-32. ISSN 0976-3961

Chawake, Niraj ; Pinto, Linford D. ; Srivastav, Ajeet K. ; Akkiraju, Karthik ; Murty, B. S. ; Kottada, Ravi Sankar (2014) On Joule heating during spark plasma sintering of metal powders Scripta Materialia, 93 . pp. 52-55. ISSN 1359-6462

Krishna Murthy, N. ; Janaki Ram, G. D. ; Murty, B. S. ; Reddy, G. M. ; Rao, T. J. P. (2014) Carbide-free bainitic weld metal: a new concept in welding of armor steels Metallurgical and Materials Transactions B, 45 (6). pp. 2327-2337. ISSN 1073-5615

Mondal, R. A. ; Murty, B. S. ; Murthy, V. R. K. (2014) Maxwell–Wagner polarization in grain boundary segregated NiCuZn ferrite Current Applied Physics, 14 (12). pp. 1727-1733. ISSN 1567-1739

Devi, Akshatala Radhika ; Arout Chelvane, J. ; Prabhakar, P. K. ; Venkateswarlu, Buchepalli ; Doble, Mukesh ; Murty, B. S. (2014) Influence of surfactant variation on effective anisotropy and magnetic properties of mechanically milled magnetite nanoparticles and their biocompatibility IEEE Transactions on Magnetics, 50 (11). pp. 1-4. ISSN 0018-9464

Preethi, M. ; Murty, B. S. ; Ganesh Sundara Raman, S. ; Natarajan, R. (2014) Control of UFG microstructure in welded carbon steel tubes by cold drawing and annealing Transactions of the Indian Institute of Metals, 67 (5). pp. 681-690. ISSN 0019-493X

Praveen, S. ; Murty, B. S. ; Kottada, Ravi S. (2014) Effect of molybdenum and niobium on the phase formation and hardness of nanocrystalline CoCrFeNi high entropy alloys Journal of Nanoscience and Nanotechnology, 14 (10). pp. 8106-8109. ISSN 1533-4880

Divya, M. ; Das, C. R. ; Albert, S. K. ; Goyal, Sunil ; Ganesh, P. ; Kaul, R. ; Swaminathan, J. ; Murty, B. S. ; Kukreja, L. M. ; Bhaduri, A. K. (2014) Influence of welding process on Type IV cracking behavior of P91 steel Materials Science and Engineering: A, 613 . pp. 148-158. ISSN 0921-5093

Battabyal, M. ; Spatig, P. ; Murty, B. S. ; Baluc, N. (2014) Investigation of microstructure and microhardness of pure W and W-2Y2O3 materials before and after ion-irradiation International Journal of Refractory Metals and Hard Materials, 46 . pp. 168-172. ISSN 0263-4368

Mudinepalli, Venkata Ramana ; Song, S. H. ; Murty, B. S. (2014) Enhanced magnetoelectric properties in lead-free Ni0.83Co0.15Cu0.02Fe1.9O4-δ–Na0.5Bi0.5TiO3 composites by spark plasma sintering Scripta Materialia, 82 . pp. 9-12. ISSN 1359-6462

Mandal, M. ; Singh, D. ; Gouthama, . ; Murty, B. S. ; Sangal, S. ; Mondal, K. (2014) Porous copper template from partially spark plasma-sintered Cu-Zn aggregate via dezincification Bulletin of Materials Science, 37 (4). pp. 743-752. ISSN 0250-4707

Mondal, R. A. ; Murty, B .S. ; Murthy, V. R. K. (2014) Temperature and frequency dependent electrical properties of NiCuZn ferrite with CuO-rich grain boundary segregation Journal of Alloys and Compounds, 595 . pp. 206-212. ISSN 0925-8388

Vincent, S. ; Bhatt, Jatin ; Murty, B. S. (2014) Thermodynamic basis for glass formation in Cu-Zr rich ternary systems and their synthesis by mechanical alloying Metallurgical and Materials Transactions A, 45 (5). pp. 2363-2370. ISSN 1073-5623

Rajan, Karthikeyan ; Rai, Nandani ; Vadlamani, Subramanya Sarma ; Murty, B. S. (2014) Isothermal grain growth studies on nanostructured 9Cr-1Mo and 9Cr-1W ferritic steels containing nano-sized oxide dispersoids Metallurgical and Materials Transactions A, 45 (4). pp. 1684-1688. ISSN 1073-5623

Sriharitha, R. ; Murty, B. S. ; Kottada, Ravi S. (2014) Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys Journal of Alloys and Compounds, 583 . pp. 419-426. ISSN 0925-8388

Mudinepalli, Venkata Ramana ; Song, Shenhua ; Li, Junqin ; Murty, B. S. (2014) Effect of grain size on the electrical properties of high dense BPT nanocrystalline ferroelectric ceramics Ceramics International, 40 (1). pp. 1781-1788. ISSN 0272-8842

Radhika Devi, A. ; Chelvane, J. A. ; Prabhakar, P. K. ; Padma Priya, P. V. ; Doble, Mukesh ; Murty, B. S. (2014) Generation of drugs coated iron nanoparticles through high energy ball milling Journal of Applied Physics, 115 (12). Article ID 124906. ISSN 0021-8979

Das, C. R. ; Albert, S. K. ; Laha, K. ; Swaminathan, J. ; Ravi, S. ; Bhaduri, A. K. ; Murty, B. S. ; Mayr, Peter (2014) Influence of coincidence site lattice boundary on creep resistance of P91 steel weldments Procedia Engineering, 86 . pp. 80-87. ISSN 1877-7058

Praveen Kumar, B. ; Kumar, H. H. ; Kharat, D. K. ; Balasubramanian, M. ; Murty, B. S. (2014) Investigation on PZT-based nanostructured functional materials Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 44 (7). pp. 991-994. ISSN 1553-3174

Praveen, S. ; Murty, B. S. ; Kottada, Ravi S. (2013) Phase evolution and densification behavior of nanocrystalline multicomponent high entropy alloys during spark plasma sintering JOM Journal of the Minerals, Metals and Materials Society, 65 (12). pp. 1797-1804. ISSN 1047-4838

Murugan, K. ; Subasri, R. ; Rao, T. N. ; Gandhi, Ashutosh S. ; Murty, B. S. (2013) Synthesis, characterization and demonstration of self-cleaning TiO2 coatings on glass and glazed ceramic tiles Progress in Organic Coatings, 76 (12). pp. 1756-1760. ISSN 0300-9440

Udhayabanu, V. ; Ravi, K. R. ; Murty, B. S. (2013) Ultrafine-grained, high-strength NiAl with Al2O3 and Al4C3 nanosized particles dispersed via mechanical alloying in toluene with spark plasma sintering Materials Science and Engineering A, 585 . pp. 379-386. ISSN 0921-5093

Mudinepalli, Venkata Ramana ; Song, Shenhua ; Li, Junqin ; Murty, B. S. (2013) A comparative study of structural and electrical properties of Ba0.8Pb0.2TiO3 nanocrystalline ceramics prepared by microwave and spark plasma sintering Materials Chemistry and Physics, 142 (2-3). pp. 686-691. ISSN 0254-0584

Vincent, S. ; Khan, A. F. ; Murty, B. S. ; Bhatt, Jatin (2013) Corrosion characterization on melt spun Cu60Zr20Ti20 metallic glass: an experimental case study Journal of Non-Crystalline Solids, 379 . pp. 48-53. ISSN 0022-3093

Alluri, Nagamalleswara Rao ; Parashar, S. K. S. ; Parashar, Kajal ; Mukherjee, Partha Sarathi ; Murty, B. S. (2013) Investigation of structural and diffuse phase transition of new nano lead-free system xBAO – yBZT − (1 − x − y) BCT Metallurgical and Materials Transactions A, 44 (11). pp. 5241-5250. ISSN 1073-5623

Rajan, Karthikeyan ; Shanmugasundaram, Thangaraju ; Subramanya Sarma, Vadlamani ; Murty, B. S. (2013) Effect of Y2O3 on spark plasma sintering kinetics of nanocrystalline 9Cr-1Mo ferritic oxide dispersion-strengthened steels Metallurgical and Materials Transactions A, 44 (9). pp. 4037-4041. ISSN 1073-5623

Praveen, S. ; Anupam, Ameey ; Sirasani, Teja ; Murty, B. S. ; Kottada, Ravi S. (2013) Characterization of oxide dispersed AlCoCrFe high entropy alloy synthesized by mechanical alloying and spark plasma sintering Transactions of the Indian Institute of Metals, 66 (4). pp. 369-373. ISSN 0972-2815

Chawake, Niraj ; Paleti, Sri Harish Kumar ; Murty, B. S. ; Kottada, Ravi S. (2013) Synthesis and characterization of spark plasma sintered FeAl and in situ FeAl–Al2O3 composite Transactions of the Indian Institute of Metals, 66 (4). pp. 419-424. ISSN 0019-493X

Srivastav, Ajeet K. ; Panindre, Anup M. ; Murty, B. S. (2013) XRD characterization of microstructural evolution during mechanical alloying of W-20 wt%Mo Transactions of the Indian Institute of Metals, 66 (4). pp. 409-414. ISSN 0019-493X

Pradeep, K. G. ; Wanderka, N. ; Choi, P. ; Banhart, J. ; Murty, B. S. ; Raabe, D. (2013) Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography Acta Materialia, 61 (12). pp. 4696-4706. ISSN 1359-6454

Sastry, A. B. S. ; Karthik Aamanchi, R. B. ; Sree Rama Linga Prasad, Ch. ; Murty, B. S. (2013) Large-scale green synthesis of Cu nanoparticles Environmental Chemistry Letters, 11 (2). pp. 183-187. ISSN 1610-3653

Mudinepalli, Venkata Ramana ; Song, Shenhua ; Murty, B. S. (2013) Microwave sintering effect on structural and dielectrical properties of Ba1−x(Sr/Pb)xTiO3 (x = 0.2 for Sr and Pb) ceramics Journal of Materials Science: Materials in Electronics, 24 (6). pp. 2141-2150. ISSN 0957-4522

Das, C. R. ; Albert, S. K. ; Bhaduri, A. K. ; Murty, B. S. (2013) Effect of boron addition and initial heat-treatment temperature on microstructure and mechanical properties of modified 9Cr-1Mo steels under different heat-treatment conditions Metallurgical and Materials Transactions A, 44 (5). pp. 2171-2186. ISSN 1073-5623

Ramakrishna Rao, B. ; Srinivas, M. ; Shah, A. K. ; Gandhi, A. S. ; Murty, B. S. (2013) A new thermodynamic parameter to predict glass forming ability in iron based multi-component systems containing zirconium Intermetallics, 35 . pp. 73-81. ISSN 0966-9795

Reddy, N. S. ; Prasada Rao, A. K. ; Krishnaiah, J. ; Chakraborty, M. ; Murty, B. S. (2013) Design of an ideal grain-refiner alloy for Al-7Si alloy using Artificial Neural Networks Journal of Materials Engineering and Performance, 22 (3). pp. 696-699. ISSN 1059-9495

Prakash, T. ; Ramasamy, S. ; Murty, B. S. (2013) Effect of DC bias on dielectric properties of nanocrystalline CuAlO2 Electronic Materials Letters, 9 (2). pp. 207-211. ISSN 1738-8090

Das, N. ; Mittra, J. ; Murty, B. S. ; Pabi, S. K. ; Kulkarni, U. D. ; Dey, G. K. (2013) Miedema model based methodology to predict amorphous-forming-composition range in binary and ternary systems Journal of Alloys and Compounds, 550 . pp. 483-495. ISSN 0925-8388

Prakash, T. ; Murty, B. S. ; Kaskhedikar, A. R. ; Peshwe, P. D. (2013) Crystallite size effect on voltage tunable giant dielectric permittivity of nanocrystalline CuO Electronic Materials Letters, 9 (1). pp. 59-62. ISSN 1738-8090

Sriharitha, R. ; Murty, B. S. ; Kottada, Ravi S. (2013) Phase formation in mechanically alloyed AlxCoCrCuFeNi (x = 0.45, 1, 2.5, 5 mol) high entropy alloys Intermetallics, 32 . pp. 119-126. ISSN 0966-9795

Das, C. R. ; Albert, S. K. ; Swaminathan, J. ; Bhaduri, A. K. ; Murty, B. S. (2013) Effect of boron on creep behaviour of inter-critically annealed modified 9Cr-1Mo steel Procedia Engineering, 55 . pp. 402-407. ISSN 1877-7058

Sirugudu, Roopas Kiran ; Vemuri, Rama Krishna Murthy ; Murty, B. S. (2013) Microwave sintering studies on low loss (Zn, Mg)TiO3 dielectric resonator materials Journal of Microwave Power and Electromagnetic Energy, 47 (4). pp. 262-269. ISSN 0832-7823

Raghavan, R. ; Hari Kumar, K. C. ; Murty, B. S. (2012) Analysis of phase formation in multi-component alloys Journal of Alloys and Compounds, 544 . pp. 152-158. ISSN 0925-8388

Rajan, Karthikeyan ; Subramanya Sarma, V. ; Kutty, T. R. G. ; Murty, B. S. (2012) Hot hardness behaviour of ultrafine grained ferritic oxide dispersion strengthened alloys prepared by mechanical alloying and spark plasma sintering Materials Science and Engineering: A, 558 . pp. 492-496. ISSN 0921-5093

Lombardi, Anthony ; D'Elia, Francesco ; Ravindran, Comondore ; Sediako, Dimitry ; Murty, B. S. ; MacKay, Robert (2012) Interplay between residual stresses, microstructure, process variables and engine block casting integrity Metallurgical and Materials Transactions A, 43 (13). pp. 5258-5270. ISSN 1073-5623

Venkata Ramana, M. ; Penchal Reddy, M. ; Ramamanohar Reddy, N. ; Murty, B. S. ; Siva Kumar, K. V. ; Song, Shenhua (2012) Mechanical properties of Ni0.83Co0.15Cu0.02Fe1.9O4−δ+PbZr0.52Ti0.48O3 particulate composites by composite oscillator technique and the correlation with the results of magnetoelectric properties Journal of Advanced Ceramics, 1 (4). pp. 317-326. ISSN 2226-4108

Nandam, Sree Harsha ; Charbhai, Nikhil ; Murty, B. S. ; Sankaran, S. (2012) Microstructural and mechanical characterization of two aluminium based in situ composite foams Transactions of the Indian Institute of Metals, 65 (6). pp. 595-600. ISSN 0972-2815

Nayak, S. S. ; Kim, D. H. ; Pabi, S. K. ; Murty, B. S. (2012) Nanocomposites of aluminum alloys by rapid solidification processing Transactions of the Indian Institute of Metals, 65 (6). pp. 647-651. ISSN 0972-2815

Vincent, S. ; Murty, B. S. ; Bhatt, Jatin (2012) Prediction of bulk metallic glass formation in Cu–Zr–Ag–Hf system by thermodynamic and topological modeling Transactions of the Indian Institute of Metals, 65 (6). pp. 827-831. ISSN 0972-2815

Ramakrishna Rao, B. ; Gandhi, A. S. ; Vincent, S. ; Bhatt, J. ; Murty, B. S. (2012) Prediction of parameters glass forming ability using thermodynamic Transactions of the Indian Institute of Metals, 65 (6). pp. 559-563. ISSN 0972-2815

Thangaraju, Shanmugasundaram ; Heilmaier, Martin ; Murty, Budaraju Srinivasa ; Vadlamani, Subramanya Sarma (2012) On the estimation of true Hall–petch constants and their role on the superposition law exponent in Al alloys Advanced Engineering Materials, 14 (10). pp. 892-897. ISSN 1438-1656

Das, C. R. ; Albert, S. K. ; Swaminathan, J. ; Raju, S. ; Bhaduri, A. K. ; Murty, B. S. (2012) Transition of crack from type IV to type II resulting from improved utilization of boron in the modified 9Cr-1Mo steel weldment Metallurgical and Materials Transactions A, 43 (10). pp. 3724-3741. ISSN 1073-5623

Srivastav, Ajeet K. ; Murty, B. S. (2012) Dilatometric analysis on shrinkage behavior during non-isothermal sintering of nanocrystalline tungsten mechanically alloyed with molybdenum Journal of Alloys and Compounds, 536 (S1). S41-S44. ISSN 0925-8388

Bhatt, J. ; Balachander, N. ; Shekher, S. ; Karthikeyan, R. ; Peshwe, D. R. ; Murty, B. S. (2012) Synthesis of nanostructured Al–Mg–SiO2 metal matrix composites using high-energy ball milling and spark plasma sintering Journal of Alloys and Compounds, 536 . S35-S40. ISSN 0925-8388

Das, C. R. ; Albert, S. K. ; Bhaduri, A. K. ; Murty, B. S. (2012) Understanding room temperature deformation behavior through indentation studies on modified 9Cr–1Mo steel weldments Materials Science and Engineering A, 552 . pp. 419-426. ISSN 0921-5093

Durga, A. ; Hari Kumar, K. C. ; Murty, B. S. (2012) Phase formation in equiatomic high entropy alloys: CALPHAD approach and experimental studies Transactions of the Indian Institute of Metals, 65 (4). pp. 375-380. ISSN 0019-493X

Vincent, S. ; Basu, Joysurya ; Murty, B. S. ; Bhatt, Jatin (2012) Micro indentation study on Cu60Zr20Ti20 metallic glass Materials Science and Engineering: A, 550 . pp. 160-166. ISSN 0921-5093

Roopas Kiran, Sirugudu ; Sreenivasulu, Gollapudi ; Murthy, Vemuri Rama Krishna ; Subramanian, Venkatachalam ; Murty, Budaraju Srinivasa (2012) Effect of grain size on the microwave dielectric characteristics of high-energy ball-milled zinc magnesium titanate ceramics Journal of the American Ceramic Society, 95 (6). pp. 1973-1979. ISSN 0002-7820

Schloth, P. ; Weisser, M. A. ; Van Swygenhoven, H. ; Van Petegem, S. ; Susila, P. ; Subramanya Sarma, V. ; Murty, B. S. ; Lauterbach, S. ; Heilmaier, M. (2012) Two strain-hardening mechanisms in nanocrystalline austenitic steel: an in situ synchrotron X-ray diffraction study Scripta Materialia, 66 (9). pp. 690-693. ISSN 1359-6462

Praveen, S. ; Murty, B. S. ; Kottada, Ravi S. (2012) Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys Materials Science and Engineering A, 534 . pp. 83-89. ISSN 0921-5093

Ravi, K. R. ; Indumathi, . ; Subramanian, R. ; Murty, B. S. (2012) Spark plasma sintering of Fe-Cr-Mo-P-B-C-Si amorphous alloy Materials Science Forum, 710 . pp. 320-325. ISSN 0255-5476

Parashar, S. K. S. ; Murty, B. S. ; Repp, S. ; Weber, S. ; Erdem, E. (2012) Investigation of intrinsic defects in core-shell structured ZnO nanocrystals Journal of Applied Physics, 111 (11). Article ID 113712. ISSN 0021-8979

Ravi, K. R. ; Murugesan, A. ; Udhayabanu, V. ; Subramanian, R. ; Murty, B. S (2012) Microstructure and mechanical property of Fe-Al2O3 nanocomposites synthesized by reactive milling followed by spark plasma sintering Materials Science Forum, 710 . pp. 291-296. ISSN 0255-5476

Vincent, S. ; Murty, B. S. ; Bhatt, J. (2012) Thermodynamic criteria for bulk metallic glass formation in Zr rich quaternary system In: AIP Conference Proceedings.

Udhayabanu, V. ; Murty, B. S. (2011) Synthesis of nanocrystalline α-Al2O3 from nanocrystalline boehmite derived from high energy ball milling of gibbiste Transactions of the Indian Institute of Metals, 64 (6). pp. 535-540. ISSN 0019-493X

Murugan, Karuppiah ; Rao, Tata N. ; Narashima Rao, G. V. ; Gandhi, Ashutosh S. ; Murty, B. S. (2011) Effect of dehydration rate on non-hydrolytic TiO2 thin film processing: structure, optical and photocatalytic performance studies Materials Chemistry and Physics, 129 (3). pp. 810-815. ISSN 0254-0584

Vincent, S. ; Peshwe, D. R. ; Murty, B. S. ; Bhatt, Jatin (2011) Thermodynamic prediction of bulk metallic glass forming alloys in ternary Zr-Cu-X (X = Ag,Al,Ti,Ga) systems Journal of Non-Crystalline Solids, 357 (19-20). pp. 3495-3499. ISSN 0022-3093

Surekha, K. ; Murty, B. S. ; Prasad Rao, K. (2011) Comparison of corrosion behaviour of friction stir processed and laser melted AA 2219 aluminium alloy Materials & Design, 32 (8-9). pp. 4502-4508. ISSN 0261-3069

Nayak, S. S. ; Chang, H. J. ; Kim, D. H. ; Pabi, S. K. ; Murty, B. S. (2011) Formation of metastable phases and nanocomposite structures in rapidly solidified Al-Fe alloys Materials Science and Engineering A, 528 (18). pp. 5967-5973. ISSN 0921-5093

Udhayabanu, V. ; Ravi, K. R. ; Murugan, K. ; Sivaprahasam, D. ; Murty, B. S. (2011) Development of Ni-Al2O3in-situ nanocomposite by reactive milling and spark plasma sintering Metallurgical and Materials Transactions A, 42A (7). pp. 2085-2093. ISSN 1073-5623

Udhayabanu, V. ; Ravi, K. R. ; Murugan, K. ; Sivaprahasam, D. ; Murty, B. S. (2011) Development of Ni-Al2O3 in-situ nanocomposite by reactive milling and spark plasma sintering Metallurgical and Materials Transactions A, 42 (7). pp. 2085-2093. ISSN 1073-5623

Ravi, K. R. ; Manivannan, S. ; Phanikumar, G. ; Murty, B. S. ; Sundarraj, Suresh (2011) Influence of Mg on grain refinement of near eutectic Al-Si alloys Metallurgical and Materials Transactions A, 42A (7). pp. 2028-2039. ISSN 1073-5623

Udhayabanu, V. ; Ravi, K. R. ; Murty, B. S. (2011) Development of in situ NiAl-Al2O3 nanocomposite by reactive milling and spark plasma sintering Journal of Alloys and Compounds, 509 . S223-S228. ISSN 0925-8388

Elsayed, Abdallah ; Ravindran, Comondore ; Murty, B. S. (2011) Effect of Al-Ti-B based master alloys on grain refinement and hot tearing susceptibility of AZ91E Magnesium alloy Materials Science Forum, 690 . pp. 351-354. ISSN 0255-5476

Shanmugasundaram, Thangaraju ; Heilmaier, Martin ; Subramanya Sarma, V. ; Murty, B. S. (2011) Thermal stability of vacuum hot pressed bulk nanostructured Al-Cu alloys Materials Science Forum, 690 . pp. 234-237. ISSN 0255-5476

Susila, P. ; Sturm, D. ; Heilmaier, M. ; Murty, B. S. ; Subramanya Sarma, V. (2011) Effect of yttria particle size on the microstructure and compression creep properties of nanostructured oxide dispersion strengthened ferritic (Fe-12Cr-2W-0.5Y2O3) alloy Materials Science and Engineering: A, 528 (13-14). pp. 4579-4584. ISSN 0921-5093

Malewar, R. ; Kumar, K. S. ; Murty, B. S. ; Sarma, B. ; Pabi, S. K. (2011) On sinterability of nanostructured W produced by high energy ball milling Journal of Materials Research, 22 (5). pp. 1200-1206. ISSN 0884-2914

Sree Rama Linga Prasad, C. h. ; Sreenivasulu, G. ; Roopas Kiran, S. ; Balasubramanian, M. ; Murty, B. S. (2011) Electrical and magnetic properties of nanocrystalline BiFeO3 prepared by high energy ball milling and microwave sintering Journal of Nanoscience and Nanotechnology, 11 (5). pp. 4097-4102. ISSN 1533-4880

Prakash, T. ; Ramasamy, S. ; Murty, B. S. (2011) Effect of DC bias on electrical conductivity of nanocrystalline α-CuSCN AIP Advances, 1 (2). 022107-022113.

Charbhai, Nikhil ; Murty, B. S. ; Sankaran, S. (2011) Characterization of microstructure and precipitation behavior in Al-4Cu-xTiB2 in-situ composite Transactions of the Indian Institute of Metals, 64 (1&2). pp. 117-121. ISSN 0972-2815

Elsayed, A. ; Ravindran, C. ; Murty, B. S. (2011) Effect of aluminum-titanium-boron based grain refiners on AZ91E magnesium alloy grain size and microstructure International Journal of Metalcasting, 5 (2). pp. 29-41. ISSN 1939-5981

Ashfaq, M. ; Prasad Rao, K. ; Khalid Rafi, H. ; Murty, B. S. ; Dey, H. C. ; Bhaduri, A. K. (2011) Friction welding of titanium to 304L stainless steel using interlayers Practical Metallography, 48 (4). pp. 188-207. ISSN 0032-678X

Nandam, Sree Harsha ; Sankaran, S. ; Murty, B. S. (2011) Precipitation kinetics in Al-Si-Mg/TiB2 in-situ composites Transactions of the Indian Institute of Metals, 64 (1&2). pp. 123-126. ISSN 0019-493X

Venkata Ramana, M. ; Roopas Kiran, S. ; Ramamanohar Reddy, N. ; Siva Kumar, K. V. ; Murthy, V. R. K. ; Murty, B. S. (2011) Investigation and characterization of Pb(Zr0.52Ti0.48)O3 nanocrystalline ferroelectric ceramics: by conventional and microwave sintering methods Materials Chemistry and Physics, 126 (1-2). pp. 295-300. ISSN 0254-0584

Venkata Ramana, M. ; Ramamanohar Reddy, N. ; Siva Kumar, K. V. ; Murthy, V. R. K. ; Murty, B. S. (2011) Magneto-electric effect in multiferroic Ni0.93Co0.02Mn0.05Fe1.95O4-δ/PbZr0.52Ti0.48O3 particulate composites: dielectric, piezoelectric properties Modern Physics Letters B, 25 (05). pp. 345-358. ISSN 0217-9849

Lombardi, A. ; D'Elia, F. ; Ravindran, C. ; Murty, B. S. ; MacKay, R. (2011) Analysis of the secondary phases in the microstructure of 319 type Al alloy engine blocks using electron microscopy and nanoindentation Transactions of the Indian Institute of Metals, 64 (1-2). pp. 7-11. ISSN 0019-493X

Arvindha Babu, D. ; Majumdar, B. ; Srivastava, A. P. ; Ramakrishna Rao, B. ; Srivastava, D. ; Murthy, B. S. ; Akhtar, D. (2011) Structure, properties, and glass forming ability of melt-spun Fe-Zr-B-Cu alloys with different Zr/B ratios Metallurgical and Materials Transactions A, 42A (2). pp. 508-516. ISSN 1073-5623

Bhatt, Jatin ; Kumar, Sundaram ; Murty, B. S. (2011) Thermodynamic model and synthesis of bulk metallic glass in Cu-Zr-Ti system by mechanical alloying Materials Science Forum, 675-677 . pp. 189-192. ISSN 0255-5476

Singh, S. ; Wanderka, N. ; Murty, B. S. ; Glatzel, U. ; Banhart, J. (2011) Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy Acta Materialia, 59 (1). pp. 182-190. ISSN 1359-6454

Karthik, B. ; Sai Gautam, G. ; Karthikeyan, N. R. ; Murty, B. S. (2011) Analysis of mechanical milling in simoloyer: an energy modeling approach Metallurgical and Materials Transactions A, 43 (4). pp. 1323-1327. ISSN 1073-5623

Das, C. R. ; Albert, S. K. ; Bhaduri, A. K. ; Murty, B. S. (2011) Characterization of ferrite in tempered martensite of modified 9Cr-1Mo steel using the electron backscattered diffraction technique Metallurgical and Materials Transactions A, 42 (13). pp. 3849-3852. ISSN 1073-5623

Senthil Saravanan, M. S. ; Kumaresh Babu, S. P. ; Sivaprasad, K. ; Ravisankar, B. ; Susila, P. ; Murty, B. S. (2011) Consolidation of CNT reinforced AA4032 nanocomposites by ECAP International Journal of Nanoscience, 10 (1-2). pp. 233-236. ISSN 0219-581X

Sirugudu, Roopas Kiran ; Vemuri, Rama Krishna Murthy ; Venkatachalam, Subramanian ; Gopalakrishnan, Anisha ; Budaraju, Srinivasa Murty (2011) Effect on the grain size of single-mode microwave sintered NiCuZn ferrite and zinc titanate dielectric resonator ceramics Journal of Microwave Power and Electromagnetic Energy, 45 (3). pp. 128-136. ISSN 0832-7823

Prashanth, K. G. ; Kumar, S. ; Scudino, S. ; Murty, B. S. ; Eckert, J. (2011) Fabrication and response of Al70Y16Ni10Co4 glass reinforced metal matrix composites Materials and Manufacturing Processes, 26 (10). pp. 1242-1247. ISSN 1042-6914

Prakash, T. ; Ramasamy, S. ; Murty, B. S. (2011) Influence of bias voltage on dielectric relaxation of nanocrystalline anatase TiO2 using modulus formalism Journal of Applied Physics, 109 (8). 084116-084120. ISSN 0021-8979

Chethan, Avinash ; Garcia-Moreno, Francisco ; Wanderka, Nelia ; Murty, B. S. ; Banhart, John (2011) Influence of oxides on the stability of zinc foam Journal of Materials Science, 46 (24). pp. 7806-7814. ISSN 0022-2461

Srivastav, Ajeet K. ; Sankaranarayana, M. ; Murty, B. S. (2011) Initial-stage sintering kinetics of nanocrystalline tungsten Metallurgical and Materials Transactions A, 42 (13). pp. 3863-3866. ISSN 1073-5623

Venkata Ramana, M. ; Ramamanohar Reddy, N. ; Siva Kumar, K. V. ; Murthy, V. R. K. ; Murty, B. S. (2011) Magneto-electric effect in multiferroic Ni0.93Co0.02Mn0.05Fe1.95O4-δ /PbZr0.52Ti0.48O3 particulate composites: dielectric, piezoelectric properties Modern Physics Letters B: Condensed Matter Physics; Statistical Physics and Applied Physics, 25 (5). pp. 345-358. ISSN 0217-9849

Ramakrishna Rao, B. ; Shah, A. K. ; Srinivas, M. ; Bhatt, J. ; Gandhi, A. S. ; Murty, B. S. (2011) On prediction of amorphous phase forming compositions in iron rich Fe-Zr-B ternary system and their synthesis Metallurgical and Materials Transactions A, 42 (13). pp. 3913-3920. ISSN 1073-5623

Bhaduri, A. K. ; Das, C. R. ; Albert, S. K. ; Klenk, A. ; Murty, B. S. (2011) Study of deformation behavior of simulated inter-critical heat-affected zones of modified 9Cr-1Mo steel Materials and Manufacturing Processes, 26 (1). pp. 62-65. ISSN 1042-6914

Venkata Ramana, M. ; Roopas Kiran, S. ; Ramamanohar Reddy, N. ; Siva Kumar, K. V. ; Murthy, V. R. K. ; Murty, B. S. (2011) Synthesis of lead free sodium bismuth titanate (NBT) ceramic by conventional and microwave sintering methods Journal of Advanced Dielectrics, 1 (1). pp. 71-77. ISSN 2010-135X

Gupta, Rajeev K. ; Darling, Kris S. ; Singh Raman, R. K. ; Ravi, K. R. ; Koch, Carl C. ; Murty, B. S. ; Scattergood, R. O. (2011) Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy Journal of Materials Science, 47 (3). pp. 1562-1566. ISSN 0022-2461

Chattopadhyay, A. ; Hari Kumar, K. C. ; Subramanya Sarma, V. ; Murty, B. S. ; Bhattacharjee, D. (2010) Prediction of carbon segregation on the surface of continuously annealed hot rolled LCAK steel Surface and Coatings Technology, 205 (7). pp. 2051-2054. ISSN 0257-8972

Timpel, M. ; Wanderka, N. ; Murty, B. S. ; Banhart, J. (2010) Three-dimensional visualization of the microstructure development of Sr-modified Al-15Si casting alloy using FIB-EsB tomography Acta Materialia, 58 (20). pp. 6600-6608. ISSN 1359-6454

Shanmugasundaram, T. ; Heilmaier, M. ; Murty, B. S. ; Subramanya Sarma, V. (2010) On the hall-petch relationship in a nanostructured Al-Cu alloy Materials Science and Engineering: A, 527 (29-30). pp. 7821-7825. ISSN 0921-5093

Senthil Saravanan, M. S. ; Sivaprasad, K. ; Kumaresh Babu, S. P. ; Susila, P. ; Murty, B. S. (2010) Synthesis and characterization of CNT reinforced AA4032 nanocomposites by high energy ball milling American Institute of Physics Conference Proceedings, 1276 (1). pp. 82-87. ISSN 0094-243X

Varalakshmi, S. ; Kamaraj, M. ; Murty, B. S. (2010) Formation and stability of equiatomic and nonequiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying Metallurgical and Materials Transactions A, 41A (10). pp. 2703-2709. ISSN 1073-5623

Khatirkar, R. K. ; Murty, B. S. (2010) Structural changes in iron powder during ball milling Materials Chemistry and Physics, 123 (1). pp. 247-253. ISSN 0254-0584

Kumar, G. S. Vinod ; Chakraborty, M. ; Murty, B. S. (2010) Settling behaviour of TiAl3,TiB2, TiC and AlB2 particles in liquid Al during grain refinement International Journal of Cast Metals Research, 23 (5). pp. 193-204. ISSN 1364-0461

Mukherjee, D. ; Ande, V. ; Manna, R. ; Murty, B. S. ; Mukhopadhyay, N. K. (2010) Formation of nanostructured and amorphous β-Al3Mg2 based alloys by rapid solidification and mechanical milling Materials Science and Engineering A, 527 (20). pp. 5078-5083. ISSN 0921-5093

Mukherjee, D. ; Ande, V. ; Manna, R. ; Murty, B. S. ; Mukhopadhyay, N. K. (2010) Formation of nanostructured and amorphous β-Al3Mg2 based alloys by rapid solidification and mechanical milling Materials Science and Engineering A, 527 (20). pp. 5078-5083. ISSN 0921-5093

Udhayabanu, V. ; Singh, Navneet ; Murty, B. S. (2010) Mechanical activation of aluminothermic reduction of NiO by high energy ball milling Journal of Alloys and Compounds, 497 (1-2). pp. 142-146. ISSN 0925-8388

Kumar, S. ; Subramanya Sarma, V. ; Murty, B. S. (2010) High temperature wear behaviour of Al-4Cu-TiB2in situ composites Wear, 268 (11-12). pp. 1266-1274. ISSN 0043-1648

Debalina, B. ; Kamaraj, M. ; Murthy, B. S. ; Chakravarthi, S. R. ; Sarathi, R. (2010) Generation and characterization of nano-tungsten carbide particles by wire explosion process Journal of Alloys and Compounds, 496 (1-2). pp. 122-128. ISSN 0925-8388

Nayak, S. S. ; Wollgarten, M. ; Banhart, J. ; Pabi, S. K. ; Murty, B. S. (2010) Nanocomposites and an extremely hard nanocrystalline intermetallic of Al-Fe alloys prepared by mechanical alloying Materials Science and Engineering: A, 527 (9). pp. 2370-2378. ISSN 0921-5093

Nayak, S. S. ; Pabi, S. K. ; Kim, D. H. ; Murty, B. S. (2010) Microstructure-hardness relationship of Al-(L12)Al3Ti nanocomposites prepared by rapid solidification processing Intermetallics, 18 (4). pp. 487-492. ISSN 0966-9795

Nayak, S. S. ; Pabi, S. K. ; Kim, D. H. ; Murty, B. S. (2010) Microstructure-hardness relationship of Al–(L12)Al3Ti nanocomposites prepared by rapid solidification processing Intermetallics, 18 (4). pp. 487-492. ISSN 0966-9795

Nayak, S. S. ; Pabi, S. K. ; Murty, B. S. (2010) Al-(L12) Al3Ti nanocomposites prepared by mechanical alloying: synthesis and mechanical properties Journal of Alloys and Compounds, 492 (1-2). pp. 128-133. ISSN 0925-8388

Nayak, S. S. ; Pabi, S. K. ; Murty, B. S. (2010) Al–(L12)Al3Ti nanocomposites prepared by mechanical alloying: synthesis and mechanical properties Journal of Alloys and Compounds, 492 (1-2). pp. 128-133. ISSN 0925-8388

Udhayabanu, V. ; Ravi, K. R. ; Vinod, V. ; Murty, B. S. (2010) Synthesis of in-situ NiAl-Al2O3 nanocomposite by reactive milling and subsequent heat treatment Intermetallics, 18 (3). pp. 353-358. ISSN 0966-9795

Udhayabanu, V. ; Ravi, K. R. ; Vinod, V. ; Murty, B. S. (2010) Synthesis of in-situ NiAl–Al2O3 nanocomposite by reactive milling and subsequent heat treatment Intermetallics, 18 (3). pp. 353-358. ISSN 0966-9795

Murugan, Karuppiah ; Rao, Tata N. ; Gandhi, Ashutosh S. ; Murty, B. S. (2010) Effect of aggregation of methylene blue dye on TiO2 surface in self-cleaning studies Catalysis Communications, 11 (6). pp. 518-521. ISSN 1566-7367

Varalakshmi, S. ; Kamaraj, M. ; Murty, B. S. (2010) Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying Materials Science and Engineering A, 527 (4-5). pp. 1027-1030. ISSN 0921-5093

Kumar, S. ; Subramaniya Sarma, V. ; Murty, B. S. (2010) Functionally graded Al-alloy matrix in-situ composites Metallurgical and Materials Transactions A, 41 (1). pp. 242-254. ISSN 1073-5623

Susila, P. ; Sturm, D. ; Heilmaier, M. ; Murty, B. S. ; Subramanya Sarma, V. (2010) Compression creep studies of mechanically alloyed nanostructured Fe-12Cr-2W-0.25Y2O3 ODS alloy Journal of Physics Conference Series, 240 (1). No pp. given. ISSN 1742-6588

Vinod Kumar, G. S. ; Murty, B. S. ; Chakraborty, M. (2010) Effect of TiAl3 particles size and distribution on their settling and dissolution behaviour in aluminium Journal of Materials Science, 45 (11). pp. 2921-2929. ISSN 0022-2461

Venkata Ramana, M. ; Ramamanohar Reddy, N. ; Murty, B. S. ; Murthy, V. R. K. ; Siva Kumar, K. V. (2010) Ferromagnetic-dielectric Ni0.5Zn0.5Fe1.9 O4-δ/PbZr0.52Ti0.48O3 particulate composites: electric, magnetic, mechanical, and electromagnetic properties Advances in Condensed Matter Physics, 2010 . 763406_1-763406_14. ISSN 1687-8108

Venkata Ramana, M. ; Ramamanohar Reddy, N. ; Murty, B. S. ; Murthy, V. R. K. ; Siva Kumar, K. V. (2010) Ferromagnetic-dielectric Ni0.5Zn0.5Fe1.9O4−δ/PbZr0.52Ti0.48O3 particulate composites: electric, magnetic, mechanical, and electromagnetic properties Advances in Condensed Matter Physics, 2010 . Article ID 763406-14 pages. ISSN 1687-8108

Varalakshmi, S. ; Appa Rao, G. ; Kamaraj, M. ; Murty, B. S. (2010) Hot consolidation and mechanical properties of nanocrystalline equiatomic AlFeTiCrZnCu high entropy alloy after mechanical alloying Journal of Materials Science, 45 (19). pp. 5158-5163. ISSN 0022-2461

Bhatt, J. ; Murty, B. S. (2010) Identification of bulk metallic forming compositions through thermodynamic and topological models Materials Science Forum, 649 . pp. 67-73. ISSN 0255-5476

Susila, P. ; Sturm, D. ; Heilmaier, M. ; Murty, B. S. ; Subramanya Sarma, V. (2010) Microstructural studies on nanocrystalline oxide dispersion strengthened austenitic (Fe-18Cr-8Ni-2W-0.25Y2O3) alloy synthesized by high energy ball milling and vacuum hot pressing Journal of Materials Science, 45 (17). pp. 4858-4865. ISSN 0022-2461

Venkata Ramana, M. ; Penchal Reddy, M. ; Ramamanohar Reddy, N. ; Siva Kumar, K. V. ; Murthy, V. R. K. ; Murty, B. S. (2010) Nanocrystalline Pb(Zr0.52Ti0.48)O3 ferroelectric ceramics: mechanical and electrical properties Journal of Nanomaterials, 2010 . 1_783043-8_783043. ISSN 1687-4110

Prashanth, K. G. ; Murty, B. S. (2010) Production, kinetic study and properties of Fe-based glass and its composites Materials and Manufacturing Processes, 25 (7). pp. 592-597. ISSN 1042-6914

Vinod Kumar, G. S. ; Murty, B. S. ; Chakraborty, M. (2010) Settling behaviour of TiAl3, TiB2, TiC and AlB2 particles refinement in liquid Al during grain refinement International Journal of Cast Metals Research, 23 (4). pp. 193-204. ISSN 1364-0461

Praveenkumar, B. ; Sreenivasalu, G. ; Kumar, H. H. ; Kharat, D. K. ; Balasubramanian, M. ; Murty, B. S. (2009) Size effect studies on nanocrystalline Pb(Zr0.53Ti0.47)O3 synthesized by mechanical activation route Materials Chemistry and Physics, 117 (2-3). pp. 338-342. ISSN 0254-0584

Venkata Ramana, M. ; Ramamanohar Reddy, N. ; Sreenivasulu, G. ; Siva kumar, K. V. ; Murty, B. S. ; Murthy, V. R. K. (2009) Enhanced mangnetoelectric voltage in multiferroic particulate Ni0.83Co0.15Cu0.02Fe1.9O4-δ/PbZr0.52Ti0.48O3 composites - dielectric, piezoelectric and magnetic properties Current Applied Physics, 9 (5). pp. 1134-1139. ISSN 1567-1739

Chattopadhyay, A. ; Subramanya Sarma, V. ; Murty, B. S. ; Haldar, A. ; Bhattacharjee, D. (2009) Studies on hot rolled galvanized steel sheets: effect of reheating on galvanizing Surface and Coatings Technology, 203 (22). pp. 3465-3471. ISSN 0257-8972

Prashanth, K. G. ; Scudino, S. ; Surreddi, K. B. ; Sakaliyska, M. ; Murty, B. S. ; Eckert, J. (2009) Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al 7.5 glassy powders produced by ball milling of pre-alloyed ingots Materials Science and Engineering A, 513-514 . pp. 279-285. ISSN 0921-5093

Prashanth, K. G. ; Scudino, S. ; Surreddi, K. B. ; Sakaliyska, M. ; Murty, B. S. ; Eckert, J. (2009) Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots Materials Science and Engineering A, 513 . pp. 279-285. ISSN 0921-5093

Prasada Rao, A. K. ; Das, K. ; Murty, B. S. ; Chakraborty, M. (2009) Al-Ti-C-Sr master alloy - A melt inoculant for simultaneous grain refinement and modification of hypoeutectic Al-Si alloys Journal of Alloys and Compounds, 480 (2). L49-L51. ISSN 0925-8388

Vardhan Lalam, S. ; Madhusudhan Reddy, G. ; Mohandas, T. ; Kamaraj, M. ; Murty, B. S. (2009) Continuous drive friction welding of Inconel 718 and EN24 dissimilar metal combination Materials Science and Technology, 25 (7). pp. 851-861. ISSN 0267-0836

Singh, Sheela ; Godkhindi, M. M. ; Krishnarao, R. V. ; Murty, B. S. (2009) Effect of milling energy on mechanical activation of (Mo + Si3N4) powders during the synthesis of Si3N4-MoSi2 in situ composites Journal of the European Ceramic Society, 29 (10). pp. 2069-2077. ISSN 0955-2219

Kumar, S. ; Subramanya Sarma, V. ; Murty, B. S. (2009) The influence of room temperature and cryogenic temperature rolling on the aging and wear behaviour of Al-4Cu-5TiB2in situ composites Journal of Alloys and Compounds, 479 (1-2). pp. 268-273. ISSN 0925-8388

Kumar, S. ; Subramanya Sarma, V. ; Murty, B. S. (2009) The influence of room temperature and cryogenic temperature rolling on the aging and wear behaviour of Al–4Cu–5TiB2 in situ composites Journal of Alloys and Compounds, 479 (1-2). pp. 268-273. ISSN 0925-8388

Mondal, K. ; Kumar, Ajay ; Gupta, G. ; Murty, B. S. (2009) Temperature and structure dependency of solid-liquid interfacial energy Acta Materialia, 57 (11). pp. 3422-3430. ISSN 1359-6454

Prashanth, K. G. ; Scudino, S. ; Murty, B. S. ; Eckert, J. (2009) Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders Journal of Alloys and Compounds, 477 (1-2). pp. 171-177. ISSN 0925-8388

Parashar, S. K. S. ; Choudhary, R. N. P. ; Murty, B. S. (2009) Nanoscale structure-property relations in Sm modified lead zirconate titanate Journal of Nanoscience and Nanotechnology, 9 (5). pp. 3106-3111. ISSN 1533-4880

Mandal, A. ; Murty, B. S. ; Chakraborty, M. (2009) Wear behaviour of near eutectic Al-Si alloy reinforced with in-situ TiB2 particles Materials Science and Engineering: A, 506 (1-2). pp. 27-33. ISSN 0921-5093

Mandal, A. ; Murty, B. S. ; Chakraborty, M. (2009) Wear behaviour of near eutectic Al–Si alloy reinforced with in-situ TiB2 particles Materials Science and Engineering: A, 506 (1-2). pp. 27-33. ISSN 0921-5093

Surekha, K. ; Murty, B. S. ; Rao, K. Prasad (2009) Effect of processing parameters on the corrosion behaviour of friction stir processed AA 2219 aluminum alloy Solid State Sciences, 11 (4). pp. 907-917. ISSN 1293-2558

Surekha, K. ; Murty, B. S. ; Prasad Rao, K. (2009) Effect of processing parameters on the corrosion behaviour of friction stir processed AA 2219 aluminum alloy Solid State Sciences, 11 (4). pp. 907-917. ISSN 1293-2558

Scudino, S. ; Liu, G. ; Prashanth, K. G. ; Bartusch, B. ; Surreddi, K. B. ; Murty, B. S. ; Eckert, J. (2009) Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy Acta Materialia, 57 (6). pp. 2029-2039. ISSN 1359-6454

Kumar, G. S. Vinod ; Murty, B. S. ; Chakraborty, M. (2009) Grain refinement response of LM25 alloy towards Al-Ti-C and Al-Ti-B grain refiners Journal of Alloys and Compounds, 472 (1-2). pp. 112-120. ISSN 0925-8388

Mandal, A. ; Murty, B. S. ; Chakraborty, M. (2009) Sliding wear behaviour of T6 treated A356-TiB2in-situ composites Wear, 256 (7-8). pp. 865-872. ISSN 0043-1648

Mandal, A. ; Murty, B. S. ; Chakraborty, M. (2009) Sliding wear behaviour of T6 treated A356–TiB2 in-situ composites Wear, 266 (7-8). pp. 865-872. ISSN 0043-1648

Mohanty, Bhaskar Chandra ; Malar, P. ; Osipowicz, Thomas ; Murty, B. S. ; Varma, Shikha ; Kasiviswanathan, S. (2009) Characterization of silver selenide thin films grown on Cr-covered Si substrates Surface and Interface Analysis, 41 (3). pp. 170-178. ISSN 0142-2421

Sreenivasulu, G. ; Babu, Hari V. ; Markandeyulu, G. ; Murty, B. S. (2009) Magnetoelectric effect of (100−x)BaTiO3-(x)NiFe1.98O4 (x=20-80 wt%) particulate nanocomposites Applied Physics Letters, 94 (11). 112902_1-112902_3. ISSN 0003-6951

Kumar, S. ; Subramanya Sarma, V. ; Murty, B. S. (2009) Effect of temperature on the wear behavior of Al-7Si-TiB2 in-situ composites Metallurgical and Materials Transactions A, 40 (1). pp. 223-231. ISSN 1073-5623

Sreenivasulu, G. ; Hari Babu, V. ; Markandeyulu, G. ; Murty, B. S. (2009) Magnetoelectric effect of (100−x)BaTiO3–(x)NiFe1.98O4 (x = 20–80 wt %) particulate nanocomposites Applied Physics Letters, 94 (11). Article ID 112902. ISSN 0003-6951

Das, C. R. ; Divya, M. ; Albert, S. K. ; Bhaduri, A. K. ; Murty, B. S. (2009) Microstructural evolution in the intercritical heat affected zone of a boron containing modified 9Cr-1Mo steel Welding World, 53 . pp. 511-515.

Shanmugasundaram, T. ; Heilmaier, M. ; Murty, B. S. ; Subramanya Sarma, V. (2009) Microstructure and mechanical properties of nanostructured Al-4Cu alloy produced by mechanical alloying and vacuum hot pressing Metallurgical and Materials Transactions A, 40 (12). pp. 2798-2801. ISSN 1073-5623

Bhatt, Jatin ; Murty, B. S. (2009) Thermodynamic modeling of Zr-Ti-Cu-Ni-Be bulk metallic glass Transactions of the Indian Institute of Metals, 62 (4-5). pp. 413-416. ISSN 0019-493X

Praveenkumar, B. ; Kumar, H. H. ; Kharat, D. K. ; Murty, B. S. (2008) Investigation and characterization of La-doped PZT nanocrystalline ceramic prepared by mechanical activation route Materials Chemistry and Physics, 112 (1). pp. 31-34. ISSN 0254-0584

Basu, Joysurya ; Murty, B. S. ; Ranganathan, S. (2008) Glass forming ability: Miedema approach to (Zr, Ti, Hf)-(Cu, Ni) binary and ternary alloys Journal of Alloys and Compounds, 465 (1-2). pp. 163-172. ISSN 0925-8388

Abhik, N. C. ; Vivek, R. ; Udhayabanu, V. ; Murty, B. S. (2008) Influence of heat of formation of B2/L12 intermetallic compounds on the milling energy for their formation during mechanical alloying Journal of Alloys and Compounds, 465 (1-2). pp. 106-112. ISSN 0925-8388

Dev, S. ; Murty, B. S. ; Rao , K. P. (2008) Effects of base and filler chemistry and weld techniques on equiaxed zone formation in Al-Zn-Mg alloy welds Science and Technology of Welding & Joining, 13 (7). pp. 598-606. ISSN 1362-1718

Chattopadhyay, A. ; Subramanya Sarma, V. ; Murty, B. S. ; Haldar, A. ; Bhattacharjee, D. (2008) Studies on hot-rolled galvanized steel sheets: segregation of alloying elements at the surface Scripta Materialia, 59 (5). pp. 522-525. ISSN 1359-6462

Mandal, A. ; Chakraborty, M. ; Murty, B. S. (2008) Ageing behaviour of A356 alloy reinforced with in-situ formed TiB2 particles Materials Science and Engineering A, 489 (1-2). pp. 220-226. ISSN 0921-5093

Mondal, K. ; Murty, B. S. (2008) Determination of kinetic parameters for devitrification of metallic glass — A theoretical approach Transactions of the Indian Institute of Metals, 61 (4). pp. 319-324. ISSN 0019-493X

Prakash, T. ; Padma Prasad, K. ; Ramasamy, S. ; Murty , B. S. (2008) Optical and electrical properties of mechanochemically synthesized nanocrystalline delafossite CuAlO2 Journal of Nanoscience and Nanotechnology, 8 (8). pp. 4273-4278. ISSN 1533-4880

Mondal, K. ; Chatterjee, U. K. ; Murty, B. S. (2008) Oxidation behavior of amorphous and nanoquasicrystalline Zr-Pd and Zr-Pt alloys Journal of Alloys and Compounds, 460 (1-2). pp. 172-181. ISSN 0925-8388

Varalakshmi, S. ; Kamaraj, M. ; Murty, B. S. (2008) Synthesis and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying Journal of Alloys and Compounds, 460 (1-2). pp. 253-257. ISSN 0925-8388

Ravi, K. R. ; Saravanan, M. ; Pillai, R. M. ; Mandal, A. ; Murty, B. S. ; Chakraborty, M. ; Pai, B. C. (2008) Equal channel angular pressing of Al-5 wt% TiB2 in situ composite Journal of Alloys and Compounds, 459 (1-2). pp. 239-243. ISSN 0925-8388

Bhatt, Jatin ; Murty, B. S. (2008) On the conditions for the synthesis of bulk metallic glasses by mechanical alloying Journal of Alloys and Compounds, 459 (1-2). pp. 135-141. ISSN 0925-8388

Ravi, K. R. ; Saravanan, M. ; Pillai, R. M. ; Mandal, A. ; Murty, B. S. ; Chakraborty, M. ; Pai, B. C. (2008) Equal channel angular pressing of Al–5 wt% TiB2 in situ composite Journal of Alloys and Compounds, 459 (1-2). pp. 239-243. ISSN 0925-8388

Bhatt, Jatin ; Dey, G. K. ; Murty, B. S. (2008) Thermodynamic and topological modeling and synthesis of Cu-Zr-Ti-Ni based bulk metallic glasses by mechanical alloying Metallurgical and Materials Transactions A, 39A (7). pp. 1543-1551. ISSN 1073-5623

Kumar, S. ; Chakraborty, M. ; Subramanya Sarma, V. ; Murty, B. S. (2008) Tensile and wear behaviour of in situ Al-7Si/TiB2 particulate composites Wear, 265 (1-2). pp. 134-142. ISSN 0043-1648

Nayak, S. S. ; Murty, B. S. ; Pabi, S. K. (2008) Structure of nanocomposites of Al-Fe alloys prepared by mechanical alloying and rapid solidification processing Bulletin of Materials Science, 31 (3). pp. 449-454. ISSN 0250-4707

Surekha, K. ; Murty, B. S. ; Prasad Rao, K. (2008) Microstructural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy Surface and Coatings Technology, 202 (17). pp. 4057-4068. ISSN 0257-8972

Rao, A. K. Prasada ; Das, K. ; Murty, B. S. ; Chakraborty, M. (2008) On the modification and segregation behavior of Sb in Al-7Si alloy during solidification Materials Letters, 62 (12-13). pp. 2013-2016. ISSN 0167-577X

Das, C. R. ; Albert, S. K. ; Bhaduri, A. K. ; Srinivasan, G. ; Murty, B. S. (2008) Effect of prior microstructure on microstructure and mechanical properties of modified 9Cr-1Mo steel weld joints Materials Science and Engineering A, 477 (1-2). pp. 185-192. ISSN 0921-5093

Rao, A. K. Prasada ; Das, K. ; Murty, B. S. ; Chakraborty, M. (2008) Microstructure and the wear mechanism of grain-refined aluminum during dry sliding against steel disc Wear, 264 (7-8). pp. 638-647. ISSN 0043-1648

Kumar, S. ; Subramanya Sarma, V. ; Murty, B. S. (2008) A statistical analysis on erosion wear behaviour of A356 alloy reinforced with in situ formed TiB2 particles Materials Science and Engineering A, 476 (1-2). pp. 333-340. ISSN 0921-5093

Prasada Rao, A. K. ; Das, K. ; Murty, B. S. ; Chakraborty, M. (2008) Microstructural features of as-cast A356 alloy inoculated with Sr, Sb modifiers and Al-Ti-C grain refiner simultaneously Materials Letters, 62 (2). pp. 273-275. ISSN 0167-577X

Vinod Kumar, G. S. ; Garcia Moreno, F. ; Banhart, J. ; Babcsan, N. ; Murty, B. S. (2008) Aluminium based metallic films Proceedings of 5th International Conference on Porous Metals and metallic Foams (MetFoam 2007) . pp. 71-74.

Takeuchi, A. ; Ranganathan, S. ; Murthy, B. S. ; Inoue, A. (2008) Analysis of composition dependence of formation of ternary bulk metallic glasses from crystallographic data on ternary compounds Reviews on Advanced Materials Science, 18 . pp. 56-60. ISSN 1605-8127

Das, N. ; Kulkarni, U. D. ; Pabi, S. K. ; Murty, B. S. ; Dey, G. K. (2008) Development of a thermodynamic criterion to predict the alloy compositions for amorphous and nanocrystalline phase formation during mechanical alloying Defect and Diffusion Forum, 279 . pp. 147-151. ISSN 1012-0386

Shanmugasundaram, T. ; Subramanya Sarma, V. ; Murty, B. S. ; Heilmaier, Martin (2008) High strength bulk nanostructured 2219 Al alloy produced by high energy ball milling and hot pressing Materials Science Forum, 584-586 . pp. 97-101. ISSN 0255-5476

Ray, P. K. ; Chattopadhyay, K. ; Murty, B. S. (2008) Influence of thermodynamics and local geometry on glass formation in Zr based alloys Applied Physics Letters, 93 (6). 061903-061905. ISSN 0003-6951

Babcsan, N. ; Vinod Kumar, G. S. ; Murty, B. S. ; Garcia Moreno, F. ; Banhart, J. (2008) New foam stabilising additive for alumnium Proceedings of 5th International Conference on Porous Metals and metallic Foams (MetFoam 2007) . pp. 27-30.

Sreenivasulu, G. ; Gopalan, R. ; Chandrasekaran, V. ; Markandeyulu, G. ; Suresh, K. G. ; Murty, B. S. (2008) Spark plasma sintered Sm2Co17-FeCo nanocomposite permanent magnets synthesized by high energy ball milling Nanotechnology, 19 (33). pp. 335701-335702. ISSN 0957-4484

Dev, Selvi ; Archibald Stuart, A. ; Ravi Dev Kumar, R. C. ; Murty, B. S. ; Prasad Rao, K. (2007) Effect of scandium additions on microstructure and mechanical properties of Al-Zn-Mg alloy welds Materials Science and Engineering A, 467 (1-2). pp. 132-138. ISSN 0921-5093

Kumar, S. ; Subramanya Sarma, V. ; Murty, B. S. (2007) Influence of in situ formed TiB2 particles on the abrasive wear behaviour of Al-4Cu alloy Materials Science and Engineering A, 465 (1-2). pp. 160-164. ISSN 0921-5093

Kumar, S. ; Subramanya Sarma, V. ; Murty, B. S. (2007) Influence of in situ formed TiB2 particles on the abrasive wear behaviour of Al–4Cu alloy Materials Science and Engineering A, 465 (1-2). pp. 160-164. ISSN 0921-5093

Kumar, S. ; Subramanya Sarma, V. ; Murty, B. S. (2007) Influence of in-situ TiB2 particles on the microstructural, mechanical and abrasive wear behavior of A356 alloy Proceedings of International Conference on Material Science and Technology (MS&T-2007) . pp. 483-489.

Venugopal, T. ; Prasad Rao, K. ; Murty, B. S. (2007) Mechanical and electrical properties of Cu-Ta nanocomposites prepared by high-energy ball milling Acta Materialia, 55 (13). pp. 4439-4445. ISSN 1359-6454

Venugopal, T. ; Prasad Rao, K. ; Murty, B. S. (2007) Synthesis of Cu-W nanocomposite by high-energy ball milling Journal of Nanoscience and Nanotechnology, 7 (7). pp. 2376-2381. ISSN 1533-4880

Bhatt, Jatin ; Kumar, S. ; Dong, C. ; Murty, B. S. (2007) Tribological behaviour of Cu60Zr30Ti10 bulk metallic glass Materials Science and Engineering A, 458 (1-2). pp. 290-294. ISSN 0921-5093

Babcsán, N. ; Vinod Kumar, G. S. ; Murty, B. S. ; Banhart, J. (2007) Grain refiners as liquid metal foam stabilizers Transactions of the Indian Institute of Metals, 60 (2-3). pp. 127-132. ISSN 0019-493X

Bhatt, Jatin ; Jiang, Wu ; Junhai, Xia ; Qing, Wang ; Dong, Chuang ; Murty, B. S. (2007) Optimization of bulk metallic glass forming compositions in Zr-Cu-Al system by thermodynamic modeling Intermetallics, 15 (5-6). pp. 716-721. ISSN 0966-9795

Prasada Rao, A. K. ; Das, K. ; Murty, B. S. ; Chakraborty, M. (2007) Role of combined addition of Sr and Sb on the microstructure and mechanical properties of cast A356 alloy Transactions of the Indian Institute of Metals, 60 (2-3). pp. 257-261. ISSN 0019-493X

Takeuchi, Akira ; Murty, Budaraju Srinivasa ; Hasegawa, Masashi ; Ranganathan, Srinivasa ; Inoue, Akihisa (2007) Analysis of bulk metallic glass formation using a tetrahedron composition diagram that consists of constituent classes based on blocks of elements in the periodic table Materials Transactions, 48 (6). pp. 1304-1312. ISSN 1345-9678

Mondal, K. ; Chatterjee, U. K. ; Murty, B. S. (2007) Oxidation behavior of multicomponent Zr-based amorphous alloys Journal of Alloys and Compounds, 433 (1-2). pp. 162-170. ISSN 0925-8388

Mondal, K. ; Murty, B. S. (2007) On the prediction of solid-liquid interfacial energy of glass forming liquids from homogeneous nucleation theory Materials Science and Engineering A, 454-455 . pp. 654-661. ISSN 0921-5093

Sahni, Sahil ; Bhaskar Reddy, S. ; Murty, B. S. (2007) Influence of process parameters on the synthesis of nano-titania by sol-gel route Materials Science and Engineering A, 452-453 . pp. 758-762. ISSN 0921-5093

Srinivasa Rao, B. ; Bhatt, Jatin ; Murty, B. S. (2007) Identification of compositions with highest glass forming ability in multicomponent systems by thermodynamic and topological approaches Materials Science and Engineering A, 449-451 . pp. 211-214. ISSN 0921-5093

Joardar, J. ; Pabi, S. K. ; Murty, B. S. (2007) Milling criteria for the synthesis of nanocrystalline NiAl by mechanical alloying Journal of Alloys and Compounds, 429 (1-2). pp. 204-210. ISSN 0925-8388

Bhatt, Jatin ; Pabi, S. K. ; Murty , B. S. (2007) Nanoindentation studies on amorphous, nanoquasicrystalline and nanocrystalline Zr80Pt20 and Zr75Pd25 alloys Journal of Nanoscience and Nanotechnology, 7 (2). pp. 658-662. ISSN 1533-4880

Mandala, A. ; Chakrabortya, M. ; Murty, B. S. (2007) Effect of TiB2 particles on sliding wear behavior of Al-4Cu alloy Wear, 262 (1-2). pp. 160-166. ISSN 0043-1648

Mandal, A. ; Chakraborty, M. ; Murty, B. S. (2007) Effect of TiB2 particles on sliding wear behaviour of Al–4Cu alloy Wear, 262 (1-2). pp. 160-166. ISSN 0043-1648

Nayak, S. S. ; Pabi, S. K. ; Murty, B. S. (2007) High strength nanocrystalline L12-Al3(Ti,Zr) intermetallic synthesized by mechanical alloying Intermetallics, 15 (1). pp. 26-33. ISSN 0966-9795

Nayak, S. S. ; Pabi, S. K. ; Murty, B. S. (2007) High strength nanocrystalline L12-Al3 (Ti,Zr) intermetallic synthesized by mechanical alloying Intermetallics, 15 (1). pp. 26-33. ISSN 0966-9795

Prakash, T. ; Padma Prasad, K. ; Kavitha, R. ; Ramasamy, S. ; Murty, B. S. (2007) Dielectric relaxation studies of nanocrystalline CuAlO2 using modulus formalism Journal of Applied Physics, 102 (10). 104104_1-104104_5. ISSN 0021-8979

Das, C. R. ; Bhaduri, A. K. ; Albert, S. K. ; Murty, B. S. (2007) Effect of prior heat treatment of base metal on the deformation behavior of heat affected zones Welding World, 51 . pp. 171-176.

Parashar, S. K. S. ; Padhi, P. ; Thakur, Awalendra K. ; Choudhary, R. N. P. ; Murty, B. S. (2007) Finite element model in nanoindentation to study nonlinear behavior of nanoceramic PGZT Materials and Manufacturing Processes, 22 (3). pp. 337-340. ISSN 1042-6914

Venkata Ramana, M. ; Sreenivasulu, G. ; Ramamanohar Reddy, N. ; Siva Kumar, K. V. ; Murty, B. S. ; Murthy, V. R. K. (2007) Internal friction and longitudinal modulus behaviour of multiferroic PbZr0.52Ti0.48O3+Ni0.93Co0.02Mn0.05Fe1.95O4-δ particulate composites Journal of Physics D: Applied Physics, 40 (23). pp. 7565-7572. ISSN 0022-3727

Venkata Ramana, M. ; Sreenivasulu, G. ; Ramamanohar Reddy, N. ; Siva Kumar, K. V. ; Murty, B. S. ; Murthy, V. R. K. (2007) Internal friction and longitudinal modulus behaviour of multiferroic PbZr0.52Ti0.48O3 +Ni0.93Co0.02Mn0.05Fe1.95O4−δ particulate composites Journal of Physics D: Applied Physics, 40 (23). pp. 7565-7571. ISSN 0022-3727

Vinod Kumar, G. S. ; García-Moreno, F. ; Babcsán, N. ; Brothers, A. H. ; Murty, B. S. ; Banhart, J. (2007) Study on aluminium-based single films Physical Chemistry Chemical Physics, 9 (48). pp. 6415-6425. ISSN 1463-9076

Kumar, S. ; Subramanya Sarma, V. ; Chakraborty, M. ; Murty, B. S. (2007) A comparative study of mechanical properties and wear behaviour of Al-4Cu-TiB2 and Al-4Cu-TiC in-situ composites Transactions of the Indian Institute of Metals, 60 (2-3). pp. 201-205. ISSN 0019-493X

Mondal, K. ; Murty, B. S. (2006) Prediction of maximum homogeneous nucleation temperature for crystallization of metallic glasses Journal of Non-Crystalline Solids, 352 (50-51). pp. 5257-5264. ISSN 0022-3093

Mohanty, Bhaskar Chandra ; Murty, B. S. ; Vijayan, V. ; Kasiviswanathan, S. (2006) Atomic force microscopy study of thermal stability of silver selenide thin films grown on silicon Applied Surface Science, 252 (22). pp. 7975-7982. ISSN 0169-4332

Mondal, K. ; Murty, B. S. ; Chatterjee, U. K. (2006) Electrochemical behavior of multicomponent amorphous and nanocrystalline Zr-based alloys in different environments Corrosion Science, 48 (8). pp. 2212-2225. ISSN 0010-938X

Prasada Rao, A. K. ; Das, K. ; Murty, B. S. ; Chakraborty, M. (2006) Microstructural and wear behavior of hypoeutectic Al-Si Alloy (LM25) grain refined and modified with Al-Ti-C-Sr master alloy Wear, 261 (2). pp. 133-139. ISSN 0043-1648

Shanmugasundaram, T. ; Murty, B. S. ; Subramanya Sarma, V. (2006) Development of ultrafine grained high strength Al-Cu alloy by cryorolling Scripta Materialia, 54 (12). pp. 2013-2017. ISSN 1359-6462

Ray, P. K. ; Ray, P. K. ; Sundar Raja, V. ; Murty, B. S. ; Chattopadhyay, K. (2006) Modelling and development of a horizontal vibratory rod mill for mechanical alloying: a first report Proceedings of National Conference on Emerging Trends in Nano Technology and Innovations in Design and Manufacturing, Rourkela, Feb 18-19 . pp. 321-332.

Mondal, K. ; Chatterjee, U. K. ; Murty, B. S. (2006) Surface oxides and their effect on the oxidation behavior of amorphous and nanoquasicrystalline Zr-Pd and Zr-Pt alloys Journal of Materials Research, 21 (3). pp. 639-646. ISSN 0884-2914

Mondal, K. ; Murty, B. S. ; Chatterjee, U. K. (2005) Stress corrosion cracking behavior of 8090 Al-Li alloy in chloride containing medium Corrosion Engineering, Science and Technology, 40 (4). pp. 313-320. ISSN 1478-422X

Murty, B. S. ; Hono, K. (2005) Understanding nano quasicrystalline phase formation in Zr based alloys Transactions of the Indian Institute of Metals, 58 (6). pp. 1213-1227. ISSN 0019-493X

Mondal, K. ; Murty, B. S. ; Chatterjee, U. K. (2005) Electrochemical behaviour of amorphous and nanoquasicrystalline Zr-Pd and Zr-Pt alloys in different environments Corrosion Science, 47 (11). pp. 2619-2635. ISSN 0010-938X

Das, N. ; Dey, G. K. ; Murty, B. S. ; Pabi, S. K. (2005) On amorphization and nanocomposite formation in Al-Ni-Ti system by mechanical alloying Pramana - Journal of Physics, 65 (5). pp. 831-840. ISSN 0304-4289

Kumar, G. S. Vinod ; Murty, B. S. ; Chakraborty, M. (2005) Development of Al-Ti-C grain refiners and study of their grain refining efficiency on Al and Al-7Si alloy Journal of Alloys and Compounds, 396 (1-2). pp. 143-150. ISSN 0925-8388

Mondal, K. ; Murty, B. S. (2005) On the parameters to assess the glass forming ability of liquids Journal of Non-Crystalline Solids, 351 (16-17). pp. 1366-1371. ISSN 0022-3093

Prasada Rao, A. K. ; Murty, B. S. ; Chakraborty, M. (2005) Improvement in tensile strength and load bearing capacity during dry wear of Al-7Si alloy by combined grain refinement and modification Materials Science and Engineering A, 395 (1-2). pp. 323-326. ISSN 0921-5093

Venugopal, T. ; Prasad Rao, K. ; Murty, B. S. (2005) Synthesis of copper-alumina nanocomposite by reactive milling Materials Science and Engineering A, 393 (1-2). pp. 382-386. ISSN 0921-5093

Reddy, N. S. ; Rao, A. K. Prasada ; Chakraborty, M. ; Murty, B. S. (2005) Prediction of grain size of Al-7Si Alloy by neural networks Materials Science and Engineering A, 391 (1-2). pp. 131-140. ISSN 0921-5093

Murty, B. S. ; Hono, K. (2005) Al-Mg- and Fe-based nanocomposites by rapid solidification processing Transactions of the Indian Institute of Metals, 58 (4). pp. 769-775. ISSN 0019-493X

Parashar, S. K. S. ; Choudhary, R. N. P. ; Murty, B. S. (2005) Nanocrystalline Zn doped PZT synthesized by mechanical alloying Ferroelectrics, 325 (1). pp. 65-74. ISSN 0015-0193

Parashar, S. K. S. ; Choudhary, R. N. P. ; Murty, B. S. (2005) Size effect of Pb0.92Nd0.08(Zr0.53Ti0.47)0.98 O3 nanoceramic synthesized by high-energy ball milling Journal of Applied Physics, 98 (10). p. 104305. ISSN 0021-8979

Parashar, S. K. S. ; Choudhary, R. N. P. ; Murty, B. S. (2005) Size effect of Pb0.92 Nd0.08 (Zr0.53 Ti0.47)0.98 O3 nanoceramic synthesized by high-energy ball milling Journal of Applied Physics, 98 (10). Article ID 104305. ISSN 0021-8979

Mandal, A. ; Maiti, R. ; Chakraborty, M. ; Murty, B. S. (2004) Effect of TiB2 on ageing response of Al-Cu alloy Materials Science and Engineering A, 386 (1-2). pp. 296-300. ISSN 0921-5093

Mandal, A. ; Maiti, R. ; Chakraborty, M. ; Murty, B. S. (2004) Effect of TiB2 particles on aging response of Al–4Cu alloy Materials Science and Engineering A, 386 (1-2). pp. 296-300. ISSN 0921-5093

Singh, Sheela ; Godkhindi, M. M. ; Rao, R. V. Krishna ; Murty, B. S. (2004) Synthesis of Si3N4-MoSi2 in situ composite from mechanically activated (Mo+ Si3N4) powders Journal of Alloys and Compounds, 381 (1-2). pp. 254-257. ISSN 0925-8388

Singh, Sheela ; Godkhindi, M. M. ; Krishnarao, R. V. ; Murty, B. S. (2004) Synthesis of Si3N4–MoSi2 in situ composite from mechanically activated (Mo+Si3N4) powders Journal of Alloys and Compounds, 381 (1-2). pp. 254-257. ISSN 0925-8388

Singh, Sheela ; Godkhindi, M. M. ; Rao, R. V. Krishna ; Murty, B. S. (2004) Effect of mechanical activation on synthesis of ultrafine Si3N4-MoSi2 in-situ composites Materials Science and Engineering A, 382 (1-2). pp. 321-327. ISSN 0921-5093

Singh, Sheela ; Godkhindi, M. M. ; Krishnarao, R. V. ; Murty, B. S. (2004) Effect of mechanical activation on synthesis of ultrafine Si3N4–MoSi2 in situ composites Materials Science and Engineering A, 382 (1-2). pp. 321-327. ISSN 0921-5093

Mukhopadhyay, N. K. ; Bhatt, Jatin ; Pramanick, A. K. ; Murty, B. S. ; Paufler, P. (2004) Synthesis of nanocrystalline/quasicrystalline Mg32(Al,Zn)49 by melt spinning and mechanical milling Journal of Materials Science, 39 (16/17). pp. 5155-5159. ISSN 0022-2461

Rao, A. K. Prasada ; Das, Karabi ; Murty, B. S. ; Chakraborty, M. (2004) Effect of grain refinement on wear properties of Al and Al-7Si alloy Wear, 257 (1-2). pp. 148-153. ISSN 0043-1648

Parashar, S. K. S. ; Choudhary, R. N. P. ; Murty, B. S. (2004) Electrical propeties of Gd-doped PZT nanoceramic synthesized by high-energy ball milling Materials Science and Engineering B, 110 (1). pp. 58-63. ISSN 0921-5107

Parashar, S. K. S ; Choudhary, R. N. P ; Murty, B. S (2004) Electrical propeties of Gd-doped PZT nanoceramic synthesized by high-energy ball milling Materials Science and Engineering B, 110 (1). pp. 58-63. ISSN 0921-5107

Joardar, J. ; Pabi, S. K. ; Murty, B. S. (2004) Estimation of entrapped powder temperature during mechanical alloying Scripta Materialia, 50 (9). pp. 1199-1202. ISSN 1359-6462

Mondal, K. ; Chatterjee, U. K. ; Murty, B. S. (2004) Corrosion and oxidation behavior of amorphous and nanoquasicrystalline phases in Zr70Pd30 and Zr80Pt20 alloys Journal of Non-Crystalline Solids, 334-335 . pp. 544-547. ISSN 0022-3093

Sahoo, K. L. ; Das, S. K. ; Murty, B. S. (2004) Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy Journal of Non-Crystalline Solids, 334-335 . pp. 29-32. ISSN 0022-3093

Srinivas, V. ; Barua, P. ; Ghosh, T. B. ; Murty, B. S. (2004) Oxidation behavior of Al-Cu-Fe nanoquasicrystal powders Journal of Non-Crystalline Solids, 334-335 . pp. 540-543. ISSN 0022-3093

Murty, B. S. ; Rao, R. V. Koteswara ; Mukhopadhyay, N. K. (2004) Stability of quasicrystalline phase in Al-Cu-Fe, Al-Cu-Co and Al-Pd-Mn alloys during High energy ball milling Journal of Non-Crystalline Solids, 334-335 . pp. 48-51. ISSN 0022-3093

Murty, B. S. ; Koteswara Rao, R. V. ; Mukhopadhyay, N. K. (2004) Stability of quasicrystalline phase in Al–Cu–Fe, Al–Cu–Co and Al–Pd–Mn systems by high energy ball milling Journal of Non-Crystalline Solids, 334 . pp. 48-51. ISSN 0022-3093

Murty, B. S. ; Barua, P. ; Srinivas, V. ; Schurack, F. ; Eckert, J. (2004) Synthesis of (Al65Cu20Fe15)100−xSix quasicrystalline alloys by mechanical alloying Journal of Non-Crystalline Solids, 334-335 . pp. 44-47. ISSN 0022-3093

Nayak, S. S. ; Murty, B. S. (2004) Synthesis and stability of L12-Al3Ti by mechanical alloying Materials Science and Engineering A, 367 (1-2). pp. 218-224. ISSN 0921-5093

Nayak, S. S. ; Murty, B. S. (2004) Synthesis and stability of L12–Al3Ti by mechanical alloying Materials Science and Engineering A, 367 (1-2). pp. 218-224. ISSN 0921-5093

Venkateswarlu, K. ; Chakraborty, M. ; Murty, B. S. (2004) Influence of thermo-mechanical processing of Al-5Ti-1B master alloy on its grain refining efficiency Materials Science and Engineering A, 364 (1-2). pp. 75-83. ISSN 0921-5093

Venkateswarlu, K. ; De, P. K. ; Ray, Ajoy K. ; Chakraborty, M. ; Murty, B. S. (2004) Effect of rolling on Al-5Ti binary master alloy (sponge route) and its grain refining performance in aluminium Journal of Metallurgy and Materials Science, 46 (2). pp. 107-113. ISSN 0972-4257

Murty, B. S. ; Hono, K. (2004) On the criteria for the formation of nanoquasicrystalline phase Applied Physics Letters, 84 (10). pp. 1674-1676. ISSN 0003-6951

Kori, S. A. ; Auradi, V. ; Murty, B. S. ; Chakraborty, M. (2004) Poisoning and fading mechanism of grain refinement in Al-7Si alloy Proceedings of 3rd International Conference On Advanced Materials Processing (ICAMP-3) . pp. 387-393.

Singh, Sheela ; Godkhindi, M. M. ; Krishnarao, R. V. ; Murthy, B. S. ; Mukunda, P. G. (2004) Studies on Reactive sintering behavior of milled nano Mo/Si3N4 powder mixture Reviews on Advanced Materials Science, 5 (4). pp. 337-342. ISSN 1605-8127

Mukhopadhyay, N. K. ; Bhatt, Jatin ; Pramanick, A. K. ; Murty, B. S. ; Paufler, P. (2004) Synthesis of nanocrystalline/quasicrystalline Mg(Al,Zn) by melt spinning and mechanical milling Journal of Materials Science, 39 (16-17). pp. 5155-5159. ISSN 0022-2461

Sahoo, K. L. ; Das, S. K. ; Murty, B. S. (2003) Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys Materials Science and Engineering A, 355 (1-2). pp. 193-200. ISSN 0921-5093

Mondal, K. ; Chatterjee, U. K. ; Murty, B. S. (2003) Gibb's free energy for the crystallization of glass forming liquids Applied Physics Letters, 83 (4). pp. 671-673. ISSN 0003-6951

Venkateswarlu, K. ; Das, S. K. ; Chakraborty, M. ; Murty, B. S. (2003) Influence of thermo-mechanical treatment of Al-5Ti master alloy on its grain refining performance on aluminium Materials Science and Engineering A, 351 (1-2). pp. 237-243. ISSN 0921-5093

Murty, B. S. ; Datta, M. K. ; Pabi, S. K. (2003) Structure and thermal stability of nanocrystalline materials Sadhana (Academy Proceedings in Engineering Sciences), 28 (1-2). pp. 23-45. ISSN 0256-2499

Parashar, S. K. S. ; Choudhary, R. N. P. ; Murty, B. S. (2003) Ferroelectric phase transition in Pb0.92Gd0.08(Zr0.53 Ti0.47)0.98O3 nanoceramic synthesized by high-energy ball milling Journal of Applied Physics, 94 (9). p. 6091. ISSN 0021-8979

Parashar, S. K. S. ; Choudhary, R. N. P. ; Murty, B. S. (2003) Ferroelectric phase transition in Pb0.92 Gd0.08 (Zr0.53 Ti0.47)0.98O3 nanoceramic synthesized by high-energy ball milling Journal of Applied Physics, 94 (9). pp. 6091-6096. ISSN 0021-8979

Mondal, K. ; Chatterjee, U. K. ; Murty, B. S. (2003) Gibb’s free energy for the crystallization of glass forming liquids Applied Physics Letters, 83 (4). pp. 671-673. ISSN 0003-6951

Murty, B. S. ; Ping, D. H. ; Hono, K. ; Kimura, H. ; Inoue, A. (2003) Microstructure of rapidly solidified high strength Al94V4Fe 2 alloy Materials Transactions, 44 (10). pp. 1993-1998. ISSN 1345-9678

Murty, B. S. ; Ping, D. H. ; Hono, K. ; Kimura, H. ; Inoue, A. (2003) Microstructure of rapidly solidified high strength Al94V4Fe2 alloy Materials Transactions, JIM, 44 (10). pp. 1993-1998. ISSN 0916-1821

Singh, Sheela ; Godkhindi, M. M. ; Krishnarao, R. V. ; Murthy, B. S. ; Mukunda, P. G. (2003) Studies on reactive sintering behavior of milled nano Mo/Si3N4 powder mixture Reviews on Advanced Materials Science, 5 . pp. 337-342. ISSN 1605-8127

Nayak, S. S. ; Murty, B. S. (2003) Synthesis of nanocrystalline Li2-Al3Ti and Al3Zr by mechanical alloying Transactions of the Indian Institute of Metals, 56 (5). pp. 457-463. ISSN 0019-493X

Mukhopadhyay, N. K. ; Murthy, G. V. S. ; Murty, B. S. ; Weatherly, G. C. (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al-Cu-Co alloy during mechanical milling Journal of Alloys and Compounds, 342 (1-2). pp. 38-41. ISSN 0925-8388

Barua, P. ; Murty, B. S. ; Mathur, B. K. ; Srinivas, V. (2002) Icosahedral phase formation domain in Al-Cu-Fe system by mechanical alloying Journal of Materials Research, 17 (3). pp. 653-659. ISSN 0884-2914

Murty, B. S. ; Kori, S. A. ; Chakraborty, M. (2002) Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying International Materials Reviews, 47 (1). pp. 3-29. ISSN 0950-6608

Barua, P. ; Murty, B. S. ; Mathur, B. K. ; Srinivas, V. (2002) Nanostructured icosahedral phase formation in Al70Cu20Fe10 by mechanical alloying: comprehensive study Journal of Applied Physics, 91 (8). 5353_1-5353_7. ISSN 0021-8979

Barua, P. ; Murty, B. S. ; Mathur, B. K. ; Srinivas, V. (2002) Nanostructured icosahedral phase formation in Al70 Cu20 Fe10 by mechanical alloying: comprehensive study Journal of Applied Physics, 91 (8). pp. 5353-5359. ISSN 0021-8979

Joardar, J. ; Pabi, S. K. ; Fecht, H.-J. ; Murty, B. S. (2002) Stability of nanocrystalline disordered NiAl synthesized by mechanical alloying Philosophical Magazine Letters, 82 (9). pp. 469-475. ISSN 0950-0839

Venkateswarlu, K. ; De, P. K. ; Das, S. K. ; Ray, A. K. ; Chakraborty, M. ; Murty, B. S. (2002) Thermo-mechanical treatment of Al-5Ti-1B and Al-5Ti master alloy on its grain refining performance on aluminium Journal of Metallurgy and Materials Science, 44 (3). pp. 109-125. ISSN 0972-4257

Mukhopadhyay, N. K. ; Murthy, G. V. S. ; Murty, B. S. ; Weatherly, G. C. (2002) Transformation of the decagonal quasicrystalline phase to a B2 crystalline phase in the Al-Cu-Co system by high-energy ball milling Philosophical Magazine Letters, 82 (7). pp. 383-392. ISSN 0950-0839

Murty, B. S. ; Ping, D. H. ; Ohnuma, M. ; Hono, K. (2001) Nanoquasicrystalline phase formation in binary Zr-Pd and Zr-Pt alloys Acta Materialia, 49 (17). pp. 3453-3462. ISSN 1359-6454

Murty, B. S. ; Hono, K. (2001) Nanoquasicrystallization of Zr-based metallic glasses Materials Science and Engineering A, 312 (1-2). pp. 253-261. ISSN 0921-5093

Wu, Y. Q. ; Ping, D. H. ; Murty, B. S. ; Kanekiyo, H. ; Hirosawa, S. ; Hono, K. (2001) Influence of heating rate on the microstructure and magnetic properties of Fe3B/Nd2Fe14B nanocomposite magnets Scripta Materialia, 45 (3). pp. 355-362. ISSN 1359-6462

Wu, Y. Q. ; Ping, D. H. ; Murty, B. S. ; Kanekiyo, H. ; Hirosawa, S. ; Hono, K. (2001) Influence of heating rate on the microstructure and magnetic properties of Fe3B/Nd2Fe14B nanocomposite magnets Scripta Materialia, 45 (3). pp. 355-362. ISSN 1359-6462

Murty, B. S. ; Ping, D. H. ; Hono, K. ; Inoue, A. (2001) APFIM and TEM study of the oxygen behavior during crystallization of Zr65Cu27.5Al7.5 metallic glass Materials Science and Engineering A, 304-306 . pp. 706-709. ISSN 0921-5093

Barua, P. ; Murty, B. S. ; Srinivas, V. (2001) Mechanical alloying of Al-Cu-Fe elemental powders Materials Science and Engineering A, 304-306 . pp. 863-866. ISSN 0921-5093

Venkateswarlu, K. ; Murty, B. S. ; Chakraborty, M. (2001) Effect of hot rolling and heat treatment of Al-5Ti-1B master alloy on the grain refining efficiency of aluminium Materials Science and Engineering A, 301 (2). pp. 180-186. ISSN 0921-5093

Murty, B. S. ; Maiti, R. ; Chakraborty, M. (2001) Development of in-situ Al-TiB2 metal matrix composites Journal of Metallurgy and Materials Science, 43 (2). pp. 93-101. ISSN 0972-4257

Takagi, T. ; Ohkubo, T. ; Hirotsu, Y. ; Murty, B. S. ; Hono, K. ; Shindo, D. (2001) Local structure of amorphous Zr70Pd30 alloy studied by electron diffraction Applied Physics Letters, 79 (4). pp. 485-487. ISSN 0003-6951

Pabi, S. K. ; Joardar, J. ; Murty, B. S. (2001) Mechanisms and kinetics of alloying and nanostructure formation by mechanical methods Proceedings of the Indian National Science Academy - Part A: Physical Sciences, 67 (1). pp. 1-30. ISSN 0370-0046

Murty, B. S. ; Kim, W. T. ; Kim, D. H. ; Hono, K. (2001) Nanocrystalline icosahedral phase formation in melt spun Ti-Zr-Ni alloys Materials Transactions, 42 (2). pp. 372-375. ISSN 1345-9678

Datta, M. K. ; Pabi, S. K. ; Murty, B. S. (2001) Thermal stability of nanocrystalline fcc and hcp Ni(Si) synthesised by mechanical alloying of Ni90Si10 Philosophical Magazine Letters, 81 (2). pp. 77-84. ISSN 0950-0839

Datta, M. K. ; Pabi, S. K. ; Murty, B. S. (2001) Thermal stability of nanocrystalline fcc and hcp Ni(Si) synthesized by mechanical alloying of Ni90Si10 Philosophical Magazine Letters, 81 (2). pp. 77-84. ISSN 0950-0839

Srinivas, V. ; Barua, P. ; Murty, B. S. (2000) On icosahedral phase formation in mechanically alloyed Al70Cu20Fe10 Materials Science and Engineering A, 294-296 . pp. 65-67. ISSN 0921-5093

Murty, B. S. ; Ping, D. H. ; Hono, K. ; Inoue, A. (2000) Influence of oxygen on the crystallization behavior of Zr65Cu27.5Al7.5 and Zr66.7Cu33.3 metallic glasses Acta Materialia, 48 (15). pp. 3985-3996. ISSN 1359-6454

Datta, M. K. ; Pabi, S. K. ; Murty, B. S. (2000) Face-centered-cubic to hexagonal-close-packed transformation in nanocrystalline Ni(Si) by mechanical alloying Journal of Materials Research, 15 (07). pp. 1429-1432. ISSN 0884-2914

Dutta, M. K. ; Pabi, S. K. ; Murty, B. S. (2000) Thermal stability of nanocrystalline Ni silicides synthesised by mechanical alloying Materials Science and Engineering A, 284 (1-2). pp. 219-225. ISSN 0921-5093

Datta, M. K. ; Pabi, S. K. ; Murty, B. S. (2000) Thermal stability of nanocrystalline Ni silicides synthesized by mechanical alloying Materials Science and Engineering A, 284 (1-2). pp. 219-225. ISSN 0921-5093

Kori, S. A. ; Murty, B. S. ; Chakraborty, M. (2000) Development of an efficient grain refiner for Al-7Si alloy and its modification with strontium Materials Science and Engineering A, 283 (1-2). pp. 94-104. ISSN 0921-5093

Murty, B. S. ; Ping, D. H. ; Hono, K. ; Inoue, A. (2000) Icosahedral phase formation by the primary crystallization of a Zr-Cu-Pd metallic glass Scripta Materialia, 43 (2). pp. 103-107. ISSN 1359-6462

Kori, S. A. ; Murty, B. S. ; Chakraborty, M. (2000) Development of an efficient grain refiner for Al-7Si alloy Materials Science and Engineering A, 280 (1). pp. 58-61. ISSN 0921-5093

Murty, B. S. ; Thakur, S. K. ; Dhindaw, B. K. (2000) On the infiltration behavior of Al, Al-Li and Mg meltas through SiCp bed Metallurgical and Materials Transactions A, 31 (1). pp. 319-325. ISSN 1073-5623

Murty, B. S. ; Thakur, S. K. ; Dhindaw, B. K. (2000) On the infiltration behavior of Al, Al-Li, and Mg meltas through SiCp bed Metallurgical and Materials Transactions A, 31A (1). pp. 319-325. ISSN 1073-5623

Murty, B. S. ; Ping, D. H. ; Hono, K. ; Inoue, A. (2000) Direct evidence for oxygen stabilization of icosahedral phase during crystallization of Zr65Cu27.5Al7.5 metallic glass Applied Physics Letters, 76 (1). pp. 55-57. ISSN 0003-6951

Murty, B. S. ; Ping, D. H. ; Hono, K. ; Inoue, A. (2000) Direct evidence for oxygen stabilization of icosahedral phase during crystallization of Zr65 Cu27.5 Al7.5 metallic glass Applied Physics Letters, 76 (1). pp. 55-57. ISSN 0003-6951

Murty, B. S. ; Hono, K. (2000) Formation of nanocrystalline particles in glassy matrix in melt-spun Mg--Cu--Y based alloys Materials Transactions, 41 (11). pp. 1538-1544. ISSN 1345-9678

Murty, B. S. ; Ping, D. H. ; Hono, K. (2000) Nanoquasicrystallization of binary Zr-Pd metallic glasses Applied Physics Letters, 77 (8). pp. 1102-1104. ISSN 0003-6951

Datta, M. K. ; Pabi, S. K. ; Murty, B. S. (2000) Phase fields of Nickel silicides obtained by mechanical alloying in the nanocrystalline state Journal of Applied Physics, 87 (12). pp. 8393-8400. ISSN 0021-8979

Barua, P. ; Srinivas, V. ; Murty, B. S. (2000) Synthesis of quasicrystalline phase by mechanical alloying of Al70Cu20Fe10 Philosophical Magazine A, 80 (5). pp. 1207-1217. ISSN 0141-8610

Barua, P. ; Srinivas, V. ; Murty, B. S. (2000) Synthesis of quasicrystalline phase during mechanical alloying of Al70Cu20Fe10 Philosophical Magazine A, 80 (5). pp. 1207-1217. ISSN 0141-8610

Kori, S. A. ; Murty, B. S. ; Chakraborty, M. (1999) Influence of silicon and magnesium on grain refinement in aluminium alloys Materials Science and Technology, 15 (9). pp. 986-992. ISSN 0267-0836

Murty, B. S. ; Kori, S. A. ; Venkateswarlu, K. ; Bhat, R. R. ; Chakraborty, M. (1999) Manufacture of Al-Ti-B master alloys by the reaction of complex halide salts with molten aluminium Journal of Materials Processing Technology, 89-90 . pp. 152-158. ISSN 0924-0136

Murty, B. S. ; Ranganathan, S. (1998) Novel materials synthesis by mechanical alloying/milling International Materials Reviews, 43 (3). pp. 101-141. ISSN 0950-6608

Rao, A. Arjuna ; Murty, B. S. ; Chakraborty, M. (1997) Role of zirconium and impurities in the grain refinement of aluminium lNith Al-Ti-B Materials Science and Technology, 13 (9). pp. 769-777. ISSN 0267-0836

Murty, B. S. ; Joardar, J. ; Pabi, S. K. (1996) Effect of non-stoichiometry on the ordering behaviour of nanocrystalline NiAl produced by mechanical alloying Journal of Materials Science Letters, 15 (24). pp. 2171-2172. ISSN 0261-8028

Pabi, S. K. ; Murty, B. S. (1996) Synthesis of nanocrystalline alloys and intermetallics by mechanical alloying Bulletin of Materials Science, 19 (6). pp. 939-956. ISSN 0250-4707

Prasad, K. V. S. ; Murty, B. S. ; Pramanik, P. ; Mukunda, P. G. ; Chakraborty, M. (1996) Reaction of fluoride salts with aluminium Materials Science and Technology, 12 (9). pp. 766-770. ISSN 0267-0836

Pabi, S. K. ; Murty, B. S. (1996) Mechanism of mechanical alloying in Ni-Al and Cu-Zn systems Materials Science and Engineering A, 214 (1-2). pp. 146-152. ISSN 0921-5093

Murty, B. S. ; Joardar, J. ; Pabi, S. K. (1996) Influence of Fe and Cr on the disordering behavior of mechanically alloyed NiAl Nanostructured Materials, 7 (6). pp. 691-697. ISSN 0965-9773

Murty, B. S. ; Singh, K. H. S. ; Pabi, S. K. (1996) Synthesis of nanocrystalline NiAl over a wide composition range by mechanical alloying Bulletin of Materials Science, 19 (3). pp. 565-571. ISSN 0250-4707

Arjuna Rao, A. ; Murty, B. S. ; Chakraborty, M. (1996) Influence of chromium and impurities on the grain-refining behavior of aluminum Metallurgical and Materials Transactions A, 27 (3). pp. 791-800. ISSN 1073-5623

Wagener, M. ; Murty, B. S. ; Gunther, B. (1996) Preparation of metal nanosuspensions by high-pressure DC-sputtering on running liquids MRS Proceedings, 457 . pp. 149-154. ISSN 1946-4274

Murty, B. S. ; Joardar, J. ; Pabi, S. K. (1996) Effect of non-stoichiometry on the ordering behaviour of nanocrystalline NiAl produced by mechanical alloying Journal of Materials Science Letters, 15 (24). pp. 2171-2172. ISSN 0261-8028

Pabi, S. K. ; Joardar, J. ; Murty, B. S. (1996) Formation of nanocrystalline phases in Cu-Zn system during mechanical alloying Journal of Materials Science, 31 (12). pp. 3207-3211. ISSN 0022-2461

Ranganathan, S. ; Murty, B. S. ; Nagarajan, R. ; Chattopadhyay, K. (1996) Nanostructured titanium-nickel alloys: a comparison of processing routes Symposium on Processing and Properties of Nanocrystalline Materials, at the Materials Week 95, 29 Oct.-2 . pp. 37-48.

Arjuna Rao, A. ; Murty, B. S. ; Chakraborty, M. (1996) Response of an Al—Cr alloy towards grain refinement by Al—5Ti-1B master alloy International Journal of Cast Metals Research, 9 (3). pp. 125-132. ISSN 1364-0461

Murty, B. S. ; Mohan, M. ; Ranganathan, S. (1995) Thermodynamics of glass formation in pure metals Calphad, 19 (3). pp. 297-304. ISSN 0364-5916

Murty, B. S. ; Mohan, M. ; Ranganathan, S. (1995) Differences in the glass-forming ability of rapidly solidified and mechanically alloyed Ti-Ni-Cu alloys Materials Science and Engineering A, 196 (1-2). pp. 237-241. ISSN 0921-5093

Murty, B. S. ; Mohan, M. ; Ranganathan, S. (1995) Milling maps and amorphization during mechanical alloying Acta Metallurgica et Materialia, 43 (6). pp. 2443-2450. ISSN 0956-7151

Murty, B. S. (1993) Mechanical alloying - a novel synthesis route for amorphous phases Bulletin of Materials Science, 16 (1). pp. 1-17. ISSN 0250-4707

Goyal, A. ; Murty, B. S. ; Ranganathan, S. (1993) Crystallization studies on amorphous Al-Y-Ni and AI-Y-Cu alloys Journal of Materials Science, 28 (22). pp. 6091-6095. ISSN 0022-2461

Murty, B. S. ; Mohan Rao, M. ; Ranganathan, S. (1993) Nanocrystalline phase formation and extension of solid solubility by mechanical alloying in Ti-based systems Nanostructured Materials, 3 (1-6). pp. 459-467. ISSN 0965-9773

Murty, B. S. ; Ranganathan, S. ; Mohan, M. (1992) Solid state amorphization in binary Ti---Ni, Ti---Cu and ternary Ti---Ni---Cu system by mechanical alloying Materials Science and Engineering: A, 149 (2). pp. 231-240. ISSN 0921-5093

Murty, B. S. ; Mohan, M. ; Ranganathan, S. (1990) Synthesis of amorphous phase in Ti---Ni---Cu system by mechanical alloying Scripta Metallurgica et Materialia, 24 (9). pp. 1819-1824. ISSN 0956-716X

This list was generated on Sat Jul 20 19:42:14 2024 UTC.