Browse by Fellow

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 38.

Kumar, A. ; Jayakumar, T. ; Raj, B. ; Banerjee, D. (2008) A new methodology for identification of β-transus temperature in α+ β and β titanium alloys using ultrasonic velocity measurements Philosophical Magazine, 88 (3). pp. 327-338. ISSN 1478-6435

Germann, L. ; Banerjee, D. ; Guédou, J. Y. ; Strudel, J. -L. (2005) Effect of composition on the mechanical properties of newly developed Ti2AlNb-based titanium aluminide Intermetallics, 13 (9). pp. 920-924. ISSN 0966-9795

Gogia, A. K. ; Baligidad, R. G. ; Banerjee, D. (2003) Toughening and creep in multiphase intermetallics through microstructural control Sadhana (Academy Proceedings in Engineering Sciences), 28 (3-4). pp. 677-693. ISSN 0256-2499

Singh, A. K. ; Muraleedharan, K. ; Banerjee, D. (2003) Solidification structure in a cast γ alloy Scripta Materialia, 48 (6). pp. 767-772. ISSN 1359-6462

Hanrahan Jr., R. J. ; Field, R. D. ; Thoma, D. J. ; Jacobson, L. A. ; Banerjee, D. (2003) Microstructural development in the dual phase intermetallic alloy Ni50Al25Be25 Intermetallics, 11 (2). pp. 95-100. ISSN 0966-9795

Mohandas, T. ; Banerjee, D. ; Kutumba Rao, V. V. (2000) Microstructure and mechanical properties of friction welds of an α+β titanium alloy Materials Science and Engineering A, 289 (1-2). pp. 70-82. ISSN 0921-5093

Nandy, T. K. ; Banerjee, D. (2000) Deformation mechanisms in the O phase Intermetallics, 8 (9-11). pp. 1269-1282. ISSN 0966-9795

Nandy, T. K. ; Banerjee, D. (2000) Creep of the orthorhombic phase based on the intermetallic Ti2AlNb Intermetallics, 8 (8). pp. 915-928. ISSN 0966-9795

Mohandas, T. ; Banerjee, D. ; Kutumbarao, V. V. (1999) Elevated temperature properties of electron beam welds of an α+β titanium alloy Materials Science and Engineering A, 269 (1-2). pp. 217-224. ISSN 0921-5093

Satya Prasad, K. ; Gokhale, A. A. ; Mukhopadhyay, A. K. ; Banerjee, D. ; Goel, D. B. (1999) On the formation of faceted Al3Zr (β') precipitates in Al-Li-Cu-Mg-Zr alloys Acta Materialia, 47 (8). pp. 2581-2592. ISSN 1359-6454

Kamat, S. V. ; Gogia, A. K. ; Banerjee, D. (1998) Effect of alloying elements and heat treatment on the fracture toughness of Ti-Al-Nb alloys Acta Materialia, 46 (1). pp. 239-251. ISSN 1359-6454

Mohandas, T. ; Banerjee, D. ; Kutumba Rao, V. V. (1998) Observations on impact toughness of electron beam welds of an α+β titanium alloy Materials Science and Engineering A, 254 (1-2). pp. 147-154. ISSN 0921-5093

Gogia, A. K. ; Nandy, T. K. ; Banerje, D. ; Carisey, T. ; Strudel, J. L. ; Franchet, J. M. (1998) Microstructure and mec-hanical properties of orthorhombic alloys in the Ti-Al-Nb system Intermetallics, 6 (7-8). pp. 741-748. ISSN 0966-9795

Singh, A. K. ; Banerjee, D. (1997) Transformations in α2+γ titanium aluminide alloys containing molybdenum: Part I. Solidification behavior Metallurgical and Materials Transactions A, 28 (9). pp. 1735-1743. ISSN 1073-5623

Chu, F. ; Mitchell, T. E. ; Majumdar, B. ; Miracle, D. ; Nandy, T. K. ; Banerjee, D. (1997) Elastic properties of the O phase in Ti-Al-Nb alloys Intermetallics, 5 (2). pp. 147-156. ISSN 0966-9795

Sagar, P. K. ; Banerjee, D. ; Muraleedharan, K. ; Prasad, Y. V. R. K. (1996) High-temperature deformation processing of Ti-24Al-20Nb Metallurgical and Materials Transactions A, 27A (9). pp. 2593-2604. ISSN 1073-5623

Mohandas, T. ; Banerjee, D. ; Mahajan, Y. R. ; Kutumba Rao, V. V. (1996) Studies on fusion zone fracture behaviour of electron beam welds of an α+β-titanium alloy Journal of Materials Science, 31 (14). pp. 3769-3775. ISSN 0022-2461

Sagar, P. K. ; Nandy, T. K. ; Gogia, A. K. ; Muraleedharan, K. ; Banerjee, D. (1995) Effect of silicon on the elevated temperature properties of a Ti3Al base alloy Materials Science and Engineering A, 192-193 . pp. 799-804. ISSN 0921-5093

Mishra, R. S. ; Banerjee, D. ; Mukherjee, A. K. (1995) Primary creep in a Ti-25Al-11Nb alloy Materials Science and Engineering A, 192-193 . pp. 756-762. ISSN 0921-5093

Muraleedharan, K. ; Nandy, T. K. ; Banerjee, D. ; Lele, S. (1995) Phase stability and ordering behaviour of the O phase in Ti-Al-Nb alloys Intermetallics, 3 (3). pp. 187-199. ISSN 0966-9795

Muraleedharan, K. ; Banerjee, D. ; Banerjee, S. ; Lele, S. (1995) The α2-to-O transformation in Ti-Al-Nb alloys Philosophical Magazine Part A, 71 (5). pp. 1011-1036. ISSN 0031-8086

Sagar, P. K. ; Banerjee, D. ; Prasad, Y. V. R. K. (1994) Processing of an α-2 aluminide alloy, Ti-24Al-11Nb Materials Science and Engineering A, 177 (1-2). pp. 185-197. ISSN 0921-5093

Prasad, N. ; Malakondaiah, G. ; Banerjee, D. ; Rama Rao, P. (1993) Low-stress creep behaviour of superplastic Zn-22% Al alloy Journal of Materials Science, 28 (6). pp. 1585-1594. ISSN 0022-2461

Gogia, A. K. ; Nandy, T. K. ; Muraleedharan, K. ; Banerjee, D. (1992) The effect of heat treatment and niobium content on the room temperature tensile properties and microstructure of Ti3Al-Nb alloys Materials Science and Engineering A, 159 (1). pp. 73-86. ISSN 0921-5093

Sharma, K. K. ; Misra, P. S. ; Banerjee, D. ; Tewari, S. N. ; Birla, N. C. (1991) Effect of minor chemistry variations on the structural and mechanical behaviour of a PM nickel base superalloy Solid State Phenomena, 8-9 . pp. 347-360. ISSN 1012-0394

Mishra, R. S. ; Banerjee, D. (1990) Microstructure and steady state creep in Ti-24Al-11Nb Materials Science and Engineering A, 130 (2). pp. 151-164. ISSN 0921-5093

Dutta, Abhijit ; Banerjee, Dipankar (1990) Superplastic behaviour in a Ti3Al-Nb alloy Scripta Metallurgica et Materialia, 24 (7). pp. 1319-1322. ISSN 0956-716X

Banerjee, D. ; Gogia, A. K. ; Nandy, T. K. (1990) Deformation structure in a Ti-24Al-11Nb alloy Metallurgical and Materials Transactions A, 21 (2). pp. 627-639. ISSN 1073-5623

Kulkarni, G. J. ; Banerjee, D. ; Ramachandran, T. R. (1989) Physical metallurgy of aluminum-lithium alloys Bulletin of Materials Science, 12 (3-4). pp. 325-340. ISSN 0250-4707

Muraleedharan, K. ; Banerjee, D. (1989) Alloy partitioning in Ti-24Al-11 Nb by analytical electron microscopy Metallurgical and Materials Transactions A, 20 (6). pp. 1139-1142. ISSN 1073-5623

Sharma, K. K. ; Banerjee, D. ; Tewari, S. N. (1988) Effect of reverse-aging treatment on the microstructure and mechanical properties of Nimonic alloys Materials Science and Engineering A, 104 . pp. 131-140. ISSN 0921-5093

Banerjee, D. ; Gogia, A. K. ; Nandi, T. K. ; Joshi, V. A. (1988) A new ordered orthorhombic phase in a Ti3Al-Nb alloy Acta Metallurgica, 36 (4). pp. 871-882. ISSN 0001-6160

Banerjee, D. ; Shelton, C. G. ; Ralph, B. ; Williams, J. C. (1988) A resolution of the interface phase problem in titanium alloys Acta Metallurgica, 36 (1). pp. 125-141. ISSN 0001-6160

Ankem, S. ; Banerjee, D. ; McNeish, D. J. ; Williams, J. C. ; Seagle, S. R. (1987) Silicide formation in Ti-3Al-8V-6Cr-4Zr-4Mo Metallurgical and Materials Transactions A, 18 (12). pp. 2015-2025. ISSN 1073-5623

Banerjee, D. ; Mukherjee, D. ; Saha, R. L. ; Bose, K. (1983) Microstructure and tensile ductility in a β heat treated titanium alloy Metallurgical and Materials Transactions A, 14 (2). pp. 413-420. ISSN 1073-5623

Banerjee, D. (1982) Identification of the interface phase in titanium alloys Metallurgical and Materials Transactions A, 13 (4). pp. 681-684. ISSN 1073-5623

Banerjee, Dipankar ; Arunachalam, V. S. (1981) On the α/β interface phase in Ti alloys Acta Metallurgica, 29 (10). pp. 1685-1694. ISSN 0001-6160

Banerjee, D. ; Krishnan, R. V. ; Vasu, K. I. (1980) A reconsideration of phase relations in the Ti-Al-Mo and Ti-Al systems Metallurgical and Materials Transactions A, 11 (7). pp. 1095-1105. ISSN 1073-5623

This list was generated on Sat Oct 20 23:03:13 2018 UTC.