Strength reliability and in vitro degradation of three-dimensional powder printed strontium-substituted magnesium phosphate scaffolds

Meininger, Susanne ; Mandal, Sourav ; Kumar, Alok ; Groll, Jürgen ; Basu, Bikramjit ; Gbureck, Uwe (2016) Strength reliability and in vitro degradation of three-dimensional powder printed strontium-substituted magnesium phosphate scaffolds Acta Biomaterialia, 31 . pp. 401-411. ISSN 1742-7061

Full text not available from this repository.

Official URL: http://doi.org/10.1016/j.actbio.2015.11.050

Related URL: http://dx.doi.org/10.1016/j.actbio.2015.11.050

Abstract

Strontium ions (Sr2+) are known to prevent osteoporosis and also encourage bone formation. Such twin requirements have motivated researchers to develop Sr-substituted biomaterials for orthopaedic applications. The present study demonstrates a new concept of developing Sr-substituted Mg3(PO4)2 – based biodegradable scaffolds. In particular, this work reports the fabrication, mechanical properties with an emphasis on strength reliability as well as in vitro degradation of highly biodegradable strontium-incorporated magnesium phosphate cements. These implantable scaffolds were fabricated using three-dimensional powder printing, followed by high temperature sintering and/or chemical conversion, a technique adaptable to develop patient-specific implants. A moderate combination of strength properties of 36.7 MPa (compression), 24.2 MPa (bending) and 10.7 MPa (tension) were measured. A reasonably modest Weibull modulus of up to 8.8 was recorded after uniaxial compression or diametral tensile tests on 3D printed scaffolds. A comparison among scaffolds with varying compositions or among sintered or chemically hardened scaffolds reveals that the strength reliability is not compromised in Sr-substituted scaffolds compared to baseline Mg3(PO4)2. The micro-computed tomography analysis reveals the presence of highly interconnected porous architecture in three-dimension with lognormal pore size distribution having median in the range of 17.74–26.29 μm for the investigated scaffolds. The results of extensive in vitro ion release study revealed passive degradation with a reduced Mg2+ release and slow but sustained release of Sr2+ from strontium-substituted magnesium phosphate scaffolds. Taken together, the present study unequivocally illustrates that the newly designed Sr-substituted magnesium phosphate scaffolds with good strength reliability could be used for biomedical applications requiring consistent Sr2+- release, while the scaffold degrades in physiological medium

Item Type:Article
Source:Copyright of this article belongs to Elsevier B.V.
Keywords:Magnesium Phosphate; Scaffold; Strontium; μ-CT.
ID Code:116166
Deposited On:22 Mar 2021 05:32
Last Modified:22 Mar 2021 05:32

Repository Staff Only: item control page