Three-level NPC inverter based SVM-VCIMD with feed-forward active PFC rectifier for enhanced AC mains power quality

Madishetti, Sandeep ; Singh, Bhim ; Bhuvaneshwari, Gurumoorthy (2016) Three-level NPC inverter based SVM-VCIMD with feed-forward active PFC rectifier for enhanced AC mains power quality IEEE Transactions on Industry Applications, 52 (2). pp. 1865-1873. ISSN 0093-9994

Full text not available from this repository.

Official URL: http://ieeexplore.ieee.org/document/7314937/

Related URL: http://dx.doi.org/10.1109/TIA.2015.2496906

Abstract

This paper presents a Scott-transformer-based power factor correction (PFC) rectifier for a three-level neutral-point-clamped (NPC) inverter-fed induction motor drive (IMD) for enhanced power quality at ac mains. Here, the Scott-transformer-based PFC rectifier is digitally controlled by a current feedforward control. The torque component of the stator current is added to the output of the dc-bus voltage proportional plus integral (PI) controller as a feedforward term, which enhances the dynamic performance of the dc-bus voltage regulation. The three-level NPC inverter is controlled by a space vector-modulated (SVM) indirect vector control scheme. The performance of the proposed dc-bus voltage loop with feedforward control is compared with the conventional one and found to offer faster response with less overshoot and undershoot. The proposed IMD system is simulated using MATLAB/Simulink and the same is validated experimentally. The proposed drive system is analyzed for a wide variation in reference speed and load torques demonstrating significant improvement in the performance indices.

Item Type:Article
Source:Copyright of this article belongs to Institute of Electrical and Electronics Engineers.
Keywords:Feed-Forward Control; Power Factor Correction; Power Quality; Space Vector Modulation; Three-Level Neutral-Point Clamped Inverter; Vector Controlled Induction Motor Drive
ID Code:106181
Deposited On:07 Aug 2017 12:32
Last Modified:07 Aug 2017 12:32

Repository Staff Only: item control page