Phase relations in the system Cu-La-O and thermodynamic properties of CuLaO2 and CuLa2O4

Jacob, K. T. ; Jayadevan, K. P. (2002) Phase relations in the system Cu-La-O and thermodynamic properties of CuLaO2 and CuLa2O4 Journal of Materials Science, 37 (8). pp. 1611-1620. ISSN 0022-2461

Full text not available from this repository.

Official URL: http://link.springer.com/article/10.1023%2FA%3A101...

Related URL: http://dx.doi.org/10.1023/A:1014957910889

Abstract

Phase relations in the system Cu-La-O at 1200 K have been determined by equilibrating samples of different average composition at 1200 K, and phase analysis of quenched samples using optical microscopy, XRD, SEM and EDX. The equilibration experiments were conducted in evacuated ampoules, and under flowing inert gas and pure oxygen. There is only one stable binary oxide La2O3 along the binary La-O, and two oxides Cu2O and CuO along the binary Cu-O. The Cu-La alloys were found to be in equilibrium with La2O3. Two ternary oxides CuLaO2 and CuLa2O4+δ were found to be stable. The value of δ varies from close to zero at the dissociation partial pressure of oxygen to 0.12 at 0.1 MPa. The ternary oxide CuLaO2, with copper in monovalent state, coexisted with Cu, Cu2O, La2O3, and/or CuLa2O4+δ in different phase fields. The compound CuLa2O4+δ, with copper in divalent state, equilibrated with Cu2O, CuO, CuLaO2, La2O3, and/or O2 gas under different conditions at 1200 K. Thermodynamic properties of the ternary oxides were determined using three solid-state cells based on yttria-stabilized zirconia as the electrolyte in the temperature range from 875 K to 1250 K. The cells essentially measure the oxygen chemical potential in the three-phase fields, Cu + La2O3 + CuLaO2, Cu2O + CuLaO2 + CuLa2O4 and La2O3 + CuLaO2 + CuLa2O4. Although measurements on two cells were sufficient for deriving thermodynamic properties of the two ternary oxides, the third cell was used for independent verification of the derived data. The Gibbs energy of formation of the ternary oxides from their component binary oxides can be represented as a function of temperature by the equations: 1/2Cu2O+1/2La2O3(A rare-earth) CulaO2 Δf.oxG°/Jmol-1=-4335+1.32 T/K(±45) CuO+La2O3(A rare-earth) CuLa2O4 Δf.oxG°/Jmol-1=-19600-4.01 T/K(±240)

Item Type:Article
Source:Copyright of this article belongs to Springer.
ID Code:95025
Deposited On:11 Oct 2012 09:10
Last Modified:11 Oct 2012 09:10

Repository Staff Only: item control page