Separations and secondary structures due to unsteady flow in a curved pipe

Krishna, C. Vamsi ; Gundiah, Namrata ; Arakeri, Jaywant H. (2017) Separations and secondary structures due to unsteady flow in a curved pipe Journal of Fluid Mechanics, 815 . pp. 26-59. ISSN 0022-1120

Full text not available from this repository.

Official URL: http://doi.org/10.1017/jfm.2017.7

Related URL: http://dx.doi.org/10.1017/jfm.2017.7

Abstract

Unsteady flows in highly curved geometries are of interest in many engineering applications and also in physiological flows. In this study, we use flow visualization and computational fluid dynamics to study unsteady flows in a highly curved tube (β=0.3) with square cross-section; here, β is the ratio of the half edge length to the radius of curvature of the tube. To explore the combined effects of curvature and pulsatility, we use a single flow pulse of duration T and peak area averaged axial velocity Up(max), which are independently varied to investigate a range of Dean and Womersley numbers. This range includes cases corresponding to flows in the ascending aorta. We observe radially inward moving secondary flows which have the structure of wall jets on the straight walls; their subsequent collision on the inner wall leads to a re-entrant radially outward moving jet. The wall jet arises due to an imbalance between the centrifugal force and the radial pressure gradient. During the deceleration phase, the low-axial-momentum fluid accumulated in the jet reverses direction and leads to flow separation near the inner wall. We use boundary layer equations to derive scales, which have not been reported earlier, for the secondary flow velocities, the wall shear stress components and the distance (P^) traversed by the secondary flow structures in the transverse plane. We show that P^ predicts the movement of vortical structures until collision. In the limit β→0, the Reynolds number based on this secondary flow velocity scale asymptotes to the secondary streaming Reynolds number proposed by Lyne (J. Fluid Mech., vol. 45 (01), 1971, pp. 13–31) in loosely curved pipes. The magnitude of the secondary flow velocity is high and ∼40% of Up(max) for physiological flow conditions. We show that the flow separation on the inner wall has origins in the secondary flow, which was reported in a few earlier studies, and is not due to the axial pressure gradient in the tube as proposed earlier. The wall shear stress components, hypothesized to be important in arterial mechanobiology, may be estimated using our scaling relations for geometries with different curvatures and varying pulsatilities.

Item Type:Article
Source:Copyright of this article belongs to Cambridge University Press
ID Code:130778
Deposited On:01 Dec 2022 11:48
Last Modified:01 Dec 2022 11:48

Repository Staff Only: item control page