Items where Author is "Jayaram, Vikram"

Article

Esakkiraja, Neelamegan ; Gupta, Ankit ; Jayaram, Vikram ; Hickel, Tilmann ; Divinski, Sergiy V. ; Paul, Aloke (2020) Diffusion, defects and understanding the growth of a multicomponent interdiffusion zone between Pt-modified B2 NiAl bond coat and single crystal superalloy Acta Materialia, 195 . pp. 35-49. ISSN 1359-6454

Krishnan, R. ; David, C. ; Ajikumar, P. K. ; Nithya, R. ; Tripura Sundari, S. ; Dash, S. ; Panigrahi, B. K. ; . . . ; Tyagi, A. K. ; Jayaram, Vikram ; Raj, Baldev (2013) Reactive pulsed laser deposition of titanium nitride thin films: effect of reactive gas pressure on the structure, composition, and properties Journal of Materials, 2013 . Article ID 128986, 5 pages. ISSN 2314-4866

Patel, Manish ; Reddy, Janardhan J. ; Bhanu Prasad, V. V. ; Jayaram, Vikram (2012) Strength of hot pressed ZrB₂–SiC composite after exposure to high temperatures (1000–1700°C) Journal of the European Ceramic Society, 32 (16). pp. 4455-4467. ISSN 0955-2219

Verma, Nisha ; Cadambi, Sumanth ; Jayaram, Vikram ; Biswas, Sanjay Kumar (2012) Micromechanisms of damage nucleation during contact deformation of columnar multilayer nitride coatings Acta Materialia, 60 (6-7). pp. 3063-3073. ISSN 1359-6454

Patel, Manish ; Reddy, J. J. ; Bhanu Prasad, V. V. ; Subrahmanyam, J. ; Jayaram, Vikram (2012) Residual strength of hot pressed zirconium diboride (ZrB₂) after exposure to high temperatures Materials Science and Engineering: A, 535 . pp. 189-196. ISSN 0921-5093

Verma, Nisha ; Jayaram, Vikram (2012) The influence of Zr layer thickness on contact deformation and fracture in a ZrN–Zr multilayer coating Journal of Materials Science, 47 (4). pp. 1621-1630. ISSN 0022-2461

Jaya B, Nagamani ; Jayaram, Vikram ; Biswas, Sanjay Kumar (2012) A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests Philosophical Magazine, 92 (25-27). pp. 3326-3345. ISSN 1478-6435

Pal, Soupitak ; Verma, Nisha ; Jayaram, Vikram ; Biswas, Sanjay Kumar ; Riddle, Yancy (2011) Characterization of phase transformation behaviour and microstructural development of electroless Ni–B coating Materials Science and Engineering: A, 528 (28). pp. 8269-8276. ISSN 0921-5093

Mahato, Anirban ; Verma, Nisha ; Jayaram, Vikram ; Biswas, S. K. (2011) Severe wear of a near eutectic aluminium-silicon alloy Acta Materialia, 59 (15). pp. 6069-6082. ISSN 1359-6454

Paul, Arindam ; Jayaram, Vikram (2011) Deformation and structural densification in Al₂O₃-Y₂O₃ glass Acta Materialia, 59 (1). pp. 82-92. ISSN 1359-6454

Rangaraja, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2010) Reactive hot pressing of ZrB₂-ZrC_x ultra-high temperature ceramic composites with the addition of SiC particulate Journal of the European Ceramic Society, 30 (15). pp. 3263-3266. ISSN 0955-2219

Kavitha, Ranganathan ; Jayaram, Vikram (2010) Deposition of ZnO films by combustion flame pyrolysis of solution precursors International Journal of Applied Ceramic Technology, 7 (4). pp. 482-492. ISSN 1546-542X

Nachiappan, Chidambaram ; Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2010) Synthesis and densification of monolithic zirconium carbide by reactive hot pressing Journal of the American Ceramic Society, 93 (5). pp. 1341-1346. ISSN 0002-7820

Mahato, Anirban ; Perry, Thomas A. ; Jayaram, Vikram ; Biswas, S. K. (2010) Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat Wear, 268 (9-10). pp. 1080-1090. ISSN 0043-1648

Krishnan, R. ; Mathews, Tom ; Balamurugan, A. K. ; Dash, S. ; Tyagi, A. K. ; Baldev Raj, ; Jayaram, Vikram (2010) Reactive pulsed laser deposition of titanium nitride thin film: optimization of process parameters using secondary ion mass spectrometry Applied Surface Science, 256 (10). pp. 3077-3080. ISSN 0169-4332

Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2010) Fabrication and mechanisms of densification of ZrB₂-based ultra high temperature ceramics by reactive hot pressing Journal of the European Ceramic Society, 30 (1). pp. 129-138. ISSN 0955-2219

Potnis, Prashant ; Holtzinger, Jennifer ; Das, Dipak ; Jayaram, Vikram ; Biswas, S. K. (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams Surface and Coatings Technology, 204 (5). pp. 586-592. ISSN 0257-8972

Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2009) Low-Temperature Densification of TiN-TiB₂ Composites through reactive hot pressing with excess Ti additions Journal of the American Ceramic Society, 92 (2). pp. 311-317. ISSN 0002-7820

Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2008) Processing of refractory metal borides, carbides and nitrides Key Engineering Materials, 395 . pp. 69-88. ISSN 1013-9826

Rangaraj, Lingappa ; Suresha, Siriyara J. ; Divakar, Canchi ; Jayaram, Vikram (2008) Low-temperature processing of ZrB₂-ZrC composites by reactive hot pressing Metallurgical and Materials Transactions A, 39 (7). pp. 1496-1505. ISSN 1073-5623

Patro, Debdutt ; Jayaram, Vikram (2008) Kinetics of pressureless infiltration of Al-Mg melts into porous alumina preforms Metallurgical and Materials Transactions B, 39 (1). pp. 108-115. ISSN 1073-5615

Sellappan, Pathikumar ; Jayaram, Vikram ; Chokshi, Atul Harish ; Divakar, Canchi (2007) Synthesis of bulk, dense, nanocrystalline yttrium aluminum garnet from amorphous powders Journal of the American Ceramic Society, 90 (11). pp. 3638-3641. ISSN 0002-7820

Patro, Debdutt ; Bhattacharyya, Saswata ; Jayaram, Vikram (2007) Flow kinetics in porous ceramics: understanding with non-uniform capillary models Journal of the American Ceramic Society, 90 (10). pp. 3040-3046. ISSN 0002-7820

Math, Souvik ; Horn, Roger ; Jayaram, Vikram ; Biswas, Sanjay Kumar (2007) A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in surface force apparatus Journal of Colloid and Interface Science, 308 (2). pp. 551-561. ISSN 0021-9797

Rao, Boddapati Srinivasa ; Rodel, Jurgen ; Jayaram, Vikram (2007) Crack growth resistance (R-curve) behaviour and thermo-physical properties of Al₂O₃ particle-reinforced AlN/Al matrix composites Composites Part A: Applied Science and Manufacturing, 38 (3). pp. 1038-1050. ISSN 1359-835X

Math, Souvik ; Jayaram, Vikram ; Biswas, S. K. (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part I. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system Journal of Materials Research, 21 (3). pp. 774-782. ISSN 0884-2914

Thangamani, Nithyanantham ; Gandhi, Ashutosh S. ; Jayaram, Vikram ; Chokshi, Atul Harish (2005) Low-temperature high-Pressure consolidation of amorphous Al₂O₃-15 mol% Y₂O₃ Journal of the American Ceramic Society, 88 (10). pp. 2696-2701. ISSN 0002-7820

Rangaraj, Lingappa ; Divakar, Canchi ; Jayaram, Vikram (2004) Reactive hot pressing of titanium nitride-titanium diboride composites at moderate pressures and temperatures Journal of the American Ceramic Society, 87 (10). pp. 1872-1878. ISSN 0002-7820

Kavitha, R. ; Hegde, S. R. ; Jayaram, Vikram (2003) Oxide films by combustion pyrolysis of solution precursors Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 359 (1-2). pp. 18-23. ISSN 0921-5093

Choudhury, Samrat ; Gandhi, Ashutosh S. ; Jayaram, Vikram (2003) Bulk, dense, nanocrystalline yttrium aluminum garnet by consolidation of amorphous powders at low temperatures and high pressures Journal of the American Ceramic Society, 86 (2). pp. 247-251. ISSN 0002-7820

Bhatia, Tania ; Chattopadhyay, Kamanio ; Jayaram, Vikram (2001) Effect of rapid solidification on microstructural evolution in MgO-MgAl₂O₄ Journal of the American Ceramic Society, 84 (8). pp. 1873-1880. ISSN 0002-7820

Jayaram, Vikram ; Rani, B. Sirisha (2001) Soft chemical routes to the synthesis of extended solid solutions of wurtzite ZnO-MO (M=Mg,Co,Ni) Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 304-306 . pp. 800-804. ISSN 0921-5093

Nagendra, N. ; Jayaram, Vikram (2000) Fracture and R-curves in high-volume fraction Al₂O₃/Al composites Journal of Materials Research, 15 (5). pp. 1131-1144. ISSN 0884-2914

Gandhi, Ashutosh S. ; Jayaram, Vikram ; Chokshi, Atul H. (1999) Dense amorphous zirconia-alumina by low-temperature consolidation of spray-pyrolyzed powders Journal of the American Ceramic Society, 82 (10). pp. 2613-2618. ISSN 0002-7820

Bhatia, Tania ; Chattopadhyay, K. ; Jayaram, Vikram (1999) Segregation in the MgO-MgAl₂O₄ system processed from nitrate precursors Journal of Materials Research, 14 (08). pp. 3319-3327. ISSN 0884-2914

Jayaram, Vikram ; Rajkumar, J. ; Rani, B. Sirisha (1999) Synthesis of metastable, wurzite-based zinc oxide-cobalt(II) oxide solid solutions by spray pyrolysis Journal of the American Ceramic Society, 82 (2). pp. 473-476. ISSN 0002-7820

Singh, R. Arvind ; Jayaram, Vikram ; Biswas, S. K. (1999) Abrasion of Al₂O₃-SiC - (Al,Si) composites made by melt oxidation Journal of Materials Research, 14 (1). pp. 64-67. ISSN 0884-2914

Srinivasan, Dheepa ; Jayaram, Vikram ; Das, P. K. ; Chattopadhyay, K. (1998) Nanodispersed microstructures on laser mixing of Al-Ni multilayers Scripta Materialia, 38 (6). pp. 857-861. ISSN 1359-6462

Bhatia, Tania ; Chattopadhyay, K. ; Jayaram, Vikram (1997) Effect of liquid precursor pyrolysis on phase selection in the MgO-MgAl₂O₄ system Materials Science and Engineering: A - Structural Materials - Properties, Microstructure and Processing, 226-228 . pp. 930-937. ISSN 0921-5093

Ravikiran, A. ; Jayaram, Vikram ; Biswas, Sanjay K. (1997) Sliding wear of Al₂O₃-SiC-(Al,Si) composites against a steel counterface Journal of the American Ceramic Society, 80 (1). pp. 219-224. ISSN 0002-7820

Kumar, Sandeep ; Jayaram, Vikram ; Mani, T. V. ; Warrier, K. G. K. (1997) Degradation of Al₂O₃-SiC-Al composites prepared by the oxidative growth of Al-alloys into SiC particulate Journal of Materials Science, 32 (17). pp. 4719-4722. ISSN 0022-2461

Gandhi, A. S. ; Jayaram, Vikram ; Chokshi, Atul Harish (1997) Phase evolution and densification of spray pyrolysed ZrO₂-Al₂O₃ powders Materials Science Forum, 243-245 . pp. 227-232. ISSN 0255-5476

Jayaram, Vikram ; Manna, Rampada ; Kshetrapal, Manjunath G. ; Sarkar, Jaydeep ; Biswas, Sanjay K. (1996) Microstructure control and wear of Al₂O₃-SiC-(Al, Si) composites made by melt oxidation Journal of the American Ceramic Society, 79 (3). pp. 770-772. ISSN 0002-7820

Hanabe, Murali ; Jayaram, Vikram ; Bhaskaran, T. A. (1996) Growth of Al₂O₃/Al composites from Al-Zn alloys Acta Materialia, 44 (2). pp. 819-829. ISSN 1359-6454

Balmer, Mari Lou ; Lange, Fred F. ; Jayaram, Vikram ; Levi, Carlos G. (1995) Development of nano-composite microstructures in ZrO₂-Al₂O₃ via the solution precursor method Journal of the American Ceramic Society, 78 (6). pp. 1489-1494. ISSN 0002-7820

Salas, Olimpia ; Jayaram, Vikram ; Vlach, Kenneth C. ; Levi, Carlos G. ; Mehrabian, Robert (1995) Early stages of composite formation by oxidation of liquid aluminium alloys Journal of the American Ceramic Society, 78 (3). pp. 609-622. ISSN 0002-7820

Rowcliffe, David J. ; Jayaram, Vikram ; Hibbs, Mary K. ; Sinclair, Robert (1988) Compressive deformation and fracture in WC materials Materials Science and Engineering: A, 105-106 . pp. 299-303. ISSN 0025-5416

Jayaram, Vikram ; Sinclalr, Robert (1983) Detection of thin intergranular cobalt layers in WC-Co composites by lattice imaging Journal of the American Ceramic Society, 66 (8). pp. C_137-C_139. ISSN 0002-7820